On Fri, Mar 20, 2015 at 2:42 PM, Miguel Clara <miguelmcl...@gmail.com>
wrote:

>
> On Fri, Mar 20, 2015 at 2:41 PM, Miguel Clara <miguelmcl...@gmail.com>
> wrote:
>
>>
>> On Fri, Mar 20, 2015 at 3:25 AM, Miguel Clara <miguelmcl...@gmail.com>
>> wrote:
>>
>>>
>>> On Fri, Mar 20, 2015 at 3:20 AM, Adrian Chadd <adr...@freebsd.org>
>>> wrote:
>>>
>>>> What's the output of ifconfig -v wlan0 ?
>>>>
>>>> and run athstats 1 for a while whilst doing traffic, say speedtest,
>>>> and paste the results from there.
>>>>
>>>>
>>>>
>>>> ]# ifconfig -v wlan0
>>>
>>>
>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>> 1500
>>>         ether e0:06:e6:aa:bf:5b
>>>         inet 10.10.50.70 netmask 0xffffff00 broadcast 10.10.50.255
>>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>         media: IEEE 802.11 Wireless Ethernet MCS mode 11na
>>>         status: associated
>>>         ssid PissnLove5G channel 48 (5240 MHz 11a ht/40-) bssid
>>> 60:a4:4c:28:13:c4
>>>         regdomain 108 country DEBUG indoor ecm authmode WPA2/802.11i -wps
>>>         -tsn privacy ON deftxkey UNDEF
>>>         AES-CCM 2:128-bit
>>>         AES-CCM 3:128-bit powersavemode OFF powersavesleep 100 txpower 30
>>>         txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7
>>>         11a     ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
>>>         11b     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
>>>         11g     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
>>>         turboA  ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
>>>         turboG  ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
>>>         sturbo  ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
>>>         11na    ucast NONE    mgmt 12 MCS  mcast 12 MCS  maxretry 6
>>>         11ng    ucast NONE    mgmt  2 MCS  mcast  2 MCS  maxretry 6
>>>         half    ucast NONE    mgmt  3 Mb/s mcast  3 Mb/s maxretry 6
>>>         quarter ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
>>>         scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
>>>         roam:11a     rssi    7dBm rate 12 Mb/s
>>>         roam:11b     rssi    7dBm rate  1 Mb/s
>>>         roam:11g     rssi    7dBm rate  5 Mb/s
>>>         roam:turboA  rssi    7dBm rate 12 Mb/s
>>>         roam:turboG  rssi    7dBm rate 12 Mb/s
>>>         roam:sturbo  rssi    7dBm rate 12 Mb/s
>>>         roam:11na    rssi    7dBm  MCS  1
>>>         roam:11ng    rssi    7dBm  MCS  1
>>>         roam:half    rssi    7dBm rate  6 Mb/s
>>>         roam:quarter rssi    7dBm rate  3 Mb/s
>>>         -pureg protmode CTS ht htcompat ampdu ampdulimit 64k
>>> ampdudensity 4
>>>         amsdu shortgi htprotmode RTSCTS -puren -smps -rifs wme burst
>>> -dwds
>>>         roaming MANUAL bintval 100
>>>         AC_BE cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm ack
>>>               cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm
>>>         AC_BK cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm ack
>>>               cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm
>>>         AC_VI cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm ack
>>>               cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm
>>>         AC_VO cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm ack
>>>               cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm
>>>         groups: wlan
>>>
>>> Going to recompile and I'll re-run athstats
>>>
>>
>> Hum it seems that after the recompile/reboot things are a bit better...
>>
>> [miguelc@r2d2:~ ]% speedtest
>> Retrieving speedtest.net configuration...
>> Retrieving speedtest.net server list...
>> Testing from Vodafone Portugal (89.114.40.155)...
>> Selecting best server based on latency...
>> Hosted by Vodafone PT (Porto) [16.63 km]: 22.599 ms
>> Testing download speed........................................
>> Download: 91.17 Mbits/s
>> Testing upload speed..................................................
>> Upload: 9.48 Mbits/s
>> [miguelc@r2d2:~ ]% speedtest
>> Retrieving speedtest.net configuration...
>> Retrieving speedtest.net server list...
>> Testing from Vodafone Portugal (89.114.40.155)...
>> Selecting best server based on latency...
>> Hosted by Vodafone PT (Porto) [16.63 km]: 5.164 ms
>> Testing download speed........................................
>> Download: 93.21 Mbits/s
>> Testing upload speed..................................................
>> Upload: 10.65 Mbits/s
>>
>> ###########################################
>> [ ID] Interval           Transfer     Bandwidth
>> [  4]   0.00-1.01   sec  1.42 MBytes  11.8 Mbits/sec
>> [  4]   1.01-2.00   sec  5.66 KBytes  46.7 Kbits/sec
>> [  4]   2.00-3.00   sec  3.94 MBytes  33.1 Mbits/sec
>> [  4]   3.00-4.00   sec  4.15 MBytes  34.8 Mbits/sec
>> [  4]   4.00-5.00   sec  4.52 MBytes  37.9 Mbits/sec
>> [  4]   5.00-6.00   sec  4.44 MBytes  37.3 Mbits/sec
>> [  4]   6.00-7.00   sec  4.44 MBytes  37.3 Mbits/sec
>> [  4]   7.00-8.00   sec  4.36 MBytes  36.6 Mbits/sec
>> [  4]   8.00-9.00   sec  6.67 MBytes  55.9 Mbits/sec
>> [  4]   9.00-10.00  sec  5.45 MBytes  45.7 Mbits/sec
>> - - - - - - - - - - - - - - - - - - - - - - - - -
>> [ ID] Interval           Transfer     Bandwidth
>> [  4]   0.00-10.00  sec  39.4 MBytes  33.1 Mbits/sec
>>  sender
>> [  4]   0.00-10.00  sec  38.9 MBytes  32.6 Mbits/sec
>>  receiver
>>
>> ( First Iperf was run on purpose in the middle of the first speedtest
>> (and while runing athstats 1)
>> [ ID] Interval           Transfer     Bandwidth
>> [  4]   0.00-1.00   sec  6.20 MBytes  52.0 Mbits/sec
>> [  4]   1.00-2.00   sec  6.46 MBytes  54.2 Mbits/sec
>> [  4]   2.00-3.00   sec  6.55 MBytes  55.0 Mbits/sec
>> [  4]   3.00-4.00   sec  8.64 MBytes  72.5 Mbits/sec
>> [  4]   4.00-5.00   sec  8.50 MBytes  71.3 Mbits/sec
>> [  4]   5.00-6.00   sec  8.81 MBytes  73.9 Mbits/sec
>> [  4]   6.00-7.00   sec  9.24 MBytes  77.5 Mbits/sec
>> [  4]   7.00-8.00   sec  8.87 MBytes  74.4 Mbits/sec
>> [  4]   8.00-9.00   sec  8.68 MBytes  72.8 Mbits/sec
>> [  4]   9.00-10.00  sec  8.94 MBytes  75.0 Mbits/sec
>> - - - - - - - - - - - - - - - - - - - - - - - - -
>> [ ID] Interval           Transfer     Bandwidth
>> [  4]   0.00-10.00  sec  80.9 MBytes  67.8 Mbits/sec
>>  sender
>> [  4]   0.00-10.00  sec  80.6 MBytes  67.6 Mbits/sec
>>  receiver
>> ############################################################
>>
>> athstats ==> http://pastebin.com/zXhG6FWc
>>
>> typo:
>
>> things look better, *I've* had better results before though, but I would
>> still consider this ok if it keeps this state...
>>
>
I left the Laptop online for quite some time (almost all day) but with no
user activiy.

I was just replying some email (as adrian might have noticed :) )and notice
the internet seemed a lot slower, and I'm back to the same reported state
in see the error messages:
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
ath0: ath_intr: TSFOOR


and speedtest results are very poor:
speedtest
Retrieving speedtest.net configuration...
Retrieving speedtest.net server list...
Testing from Vodafone Portugal (89.114.40.155)...
Selecting best server based on latency...
Hosted by Vodafone PT (Porto) [16.63 km]: 5.686 ms
Testing download speed........................................
Download: 33.64 Mbits/s
Testing upload speed..................................................
Upload: 6.69 Mbits/s

I was also playing with the "Fn-F3" key was reported in the other thread
but I've done it earlier and saw no issues at the time.

I wonder then if this as something to do with long periods of inactivity
which as the first TSFOOR is ~22pm
Mar 21 21:55:10 r2d2 kernel: ath0: ath_intr: TSFOOR

Thats basicly ~the time I resumed the session, and by that I mean just
login back to lumina-DE - I did not use resume/suspend, as I was plaining
to be back sooner :)





>> -a
>>>>
>>>>
>>>> On 19 March 2015 at 20:17, Adrian Chadd <adr...@freebsd.org> wrote:
>>>> > Ah, add ATH_DEBUG, AH_DEBUG and AH_DIAGAPI to your kernel and
>>>> recompile!
>>>> >
>>>> >
>>>> > -a
>>>> >
>>>> >
>>>> > On 19 March 2015 at 19:32, Miguel Clara <miguelmcl...@gmail.com>
>>>> wrote:
>>>> >>
>>>> >> On Fri, Mar 20, 2015 at 2:11 AM, Miguel Clara <
>>>> miguelmcl...@gmail.com>
>>>> >> wrote:
>>>> >>>
>>>> >>>
>>>> >>> On Fri, Mar 20, 2015 at 1:55 AM, Miguel Clara <
>>>> miguelmcl...@gmail.com>
>>>> >>> wrote:
>>>> >>>>
>>>> >>>>
>>>> >>>> On Fri, Mar 20, 2015 at 1:18 AM, Miguel Clara <
>>>> miguelmcl...@gmail.com>
>>>> >>>> wrote:
>>>> >>>>>
>>>> >>>>>
>>>> >>>>> On Thu, Mar 19, 2015 at 9:49 PM, Adrian Chadd <adr...@freebsd.org
>>>> >
>>>> >>>>> wrote:
>>>> >>>>>>
>>>> >>>>>> Whilst running this, can you run 'athstats 1' on the freebsd box?
>>>> >>>>>>
>>>> >>>>>> i wonder what the signal level and retransmit rates are.
>>>> >>>>>
>>>> >>>>>
>>>> >>>>> Not sure hwo to do that... do I need ath_debug?
>>>> >>>>>
>>>> >>>>> I did found '/usr/src/tools/tools/ath/athstats' and tried to
>>>> "make"
>>>> >>>>>
>>>> >>>>> clang -O2 -pipe   -DATH_DEFAULT='"ath0"'
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../common
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/dev/ath
>>>> >>>>>
>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/dev/ath/ath_hal
>>>> >>>>>
>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/contrib/dev/ath/ath_hal
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats -DATH_SUPPORT_ANI
>>>> -DATH_SUPPORT_TDMA
>>>> >>>>> -DATH_DEFAULT='"ath0"' -I/usr/src/tools/tools/ath/athstats
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../common
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/dev/ath
>>>> >>>>>
>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/dev/ath/ath_hal
>>>> >>>>>
>>>> -I/usr/src/tools/tools/ath/athstats/../../../../sys/contrib/dev/ath/ath_hal
>>>> >>>>> -I/usr/src/tools/tools/ath/athstats -std=gnu99 -fstack-protector
>>>> >>>>> -fbracket-depth=512 -Qunused-arguments  -rpath /usr/lib/private
>>>> -o athstats
>>>> >>>>> main.o athstats.o -L/usr/src/lib/libbsdstat -lbsdstat
>>>> >>>>> /usr/bin/ld: cannot find -lbsdstat
>>>> >>>>> clang: error: linker command failed with exit code 1 (use -v to
>>>> see
>>>> >>>>> invocation)
>>>> >>>>> *** Error code 1
>>>> >>>>>
>>>> >>>>> Stop.
>>>> >>>>> make: stopped in /usr/src/tools/tools/ath/athstats
>>>> >>>>>
>>>> >>>>> I installed bsdstats but after make clean;make  I still get the
>>>> same.
>>>> >>>>
>>>> >>>>
>>>> >>>> Oh wait:
>>>> >>>> -L/usr/src/lib/libbsdstat -lbsdstat
>>>> >>>>
>>>> >>>> /usr/bin/ld: cannot find -lbsdstat
>>>> >>>>
>>>> >>>> Should it look in /usr/private?
>>>> >>>>
>>>> >>>> Or maybe not... I saw this:
>>>> >>>> ######################
>>>> >>>> commit 050d4409aa855fa1f82f6ca0dbb7e0c865c05e32
>>>> >>>> Author: bapt <b...@freebsd.org>
>>>> >>>> Date:   Tue Nov 25 22:37:27 2014 +0000
>>>> >>>>
>>>> >>>>     Convert to LIBADD
>>>> >>>>
>>>> >>>> Notes:
>>>> >>>>     svn path=/head/; revision=275084
>>>> >>>>
>>>> >>>> diff --git a/tools/tools/ath/athstats/Makefile
>>>> >>>> b/tools/tools/ath/athstats/Makefile
>>>> >>>> index 8d1bfa6..a7ff43b 100644
>>>> >>>> --- a/tools/tools/ath/athstats/Makefile
>>>> >>>> +++ b/tools/tools/ath/athstats/Makefile
>>>> >>>> @@ -23,9 +23,7 @@ CFLAGS+=-DATH_SUPPORT_TDMA
>>>> >>>>
>>>> >>>>  CFLAGS.clang+= -fbracket-depth=512
>>>> >>>>
>>>> >>>> -USEPRIVATELIB= bsdstat
>>>> >>>> -
>>>> >>>> -LDADD= ${LDBSDSTAT}
>>>> >>>> +LIBADD=        bsdstat
>>>> >>>>
>>>> >>>>  opt_ah.h:
>>>> >>>>         echo "#define AH_DEBUG 1" > opt_ah.h
>>>> >>>> #################
>>>> >>>>
>>>> >>>> reverting gives me this:
>>>> >>>>
>>>> >>>> [...]ib/private -rpath /usr/lib/private -o athstats main.o
>>>> athstats.o
>>>> >>>> athstats.o: In function `athstats_new':
>>>> >>>> athstats.c:(.text+0x3e): undefined reference to `bsdstat_init'
>>>> >>>> clang: error: linker command failed with exit code 1 (use -v to see
>>>> >>>> invocation)
>>>> >>>>
>>>> >>>> If I can get around this I'd love to post those stats
>>>> >>>>
>>>> >>>
>>>> >>> Sadly I'm no C expert... I'm not even a coder but "bsdstat_init"
>>>> defiantly
>>>> >>> exists and the include bsdstat.h is in athstats.h...
>>>> >>> makes no sense (to me) :|
>>>> >>>
>>>> >>
>>>> >> In the mean time I checked out a version before bsdstat and I was
>>>> able to
>>>> >> complie, output follows
>>>> >> % sudo athstats
>>>> >> athstats: ioctl: ath0: Invalid argument <------------------ Is this
>>>> >> expected?
>>>> >> athstats: ioctl: ath0: Invalid argument
>>>> >> 990785       data frames received
>>>> >> 559194       data frames transmit
>>>> >> 7602         tx frames with an alternate rate
>>>> >> 27634        short on-chip tx retries
>>>> >> 100075       long on-chip tx retries
>>>> >> 374          tx failed 'cuz too many retries
>>>> >> 24           mib overflow interrupts
>>>> >> 3            tx linearized to cluster
>>>> >> MCS3         current transmit rate
>>>> >> 17           beacon miss interrupts
>>>> >> 31173        rx failed 'cuz of bad CRC
>>>> >> 114          rx failed 'cuz of PHY err
>>>> >>     5            OFDM restart
>>>> >>     109          CCK restart
>>>> >> 247          periodic calibrations
>>>> >> -0/+0        TDMA slot adjust (usecs, smoothed)
>>>> >> 28           rssi of last ack
>>>> >> 40           avg recv rssi
>>>> >> -96          rx noise floor
>>>> >> 614          tx frames through raw api
>>>> >> 601749       A-MPDU sub-frames received
>>>> >> 187766       Half-GI frames received
>>>> >> 443941       40MHz frames received
>>>> >> 12776        CRC errors for non-last A-MPDU subframes
>>>> >> 198          CRC errors for last subframe in an A-MPDU
>>>> >> 558554       Frames transmitted with HT Protection
>>>> >> 169          TX Timeout
>>>> >> Antenna profile:
>>>> >> [0] tx   558817 rx    36629
>>>> >> [1] tx        0 rx   772652
>>>> >> [2] tx        0 rx    26737
>>>> >> [3] tx        0 rx    30276
>>>> >> [4] tx        0 rx    28833
>>>> >> [5] tx        0 rx    25606
>>>> >> [6] tx        0 rx    30300
>>>> >> [7] tx        0 rx    39752
>>>> >>
>>>> >>
>>>> >>
>>>> >>>
>>>> >>>
>>>> >>>>
>>>> >>>>>
>>>> >>>>>> Thanks,
>>>> >>>>>>
>>>> >>>>>>
>>>> >>>>>> -a
>>>> >>>>>
>>>> >>>>>
>>>> >>>>
>>>> >>>
>>>> >>
>>>>
>>>
>>>
>>
>
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to