Hello Freebsd-wireless,
I have old Sony Vaio with wpi WiFi card:
wpi0@pci0:6:0:0: class=0x028000 card=0x10508086 chip=0x42228086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/Wireless 3945ABG [Golan] Network Connection'
class = network
It worked with -CURRENT from ~ Nov 2014 (it complained about callbacks, but
worked rather well!) but after update to r281061, it stops to work.
Driver (and wpa_supplicant!) complains to console several times per second:
...
Apr 6 00:00:13 labrat kernel: wpi0: wpi_send_rxon: could not set TX power,
error 35
Apr 6 00:00:13 labrat kernel: wpi0: wpi_config: could not send RXON
Apr 6 00:00:13 labrat kernel: wpi0: wpi_init: could not configure device,
error 35
Apr 6 00:00:13 labrat kernel: wpi0: could not add broadcast node, error 35
Apr 6 00:00:13 labrat kernel: wpi0: wpi_config: could not send RXON
Apr 6 00:00:13 labrat kernel: wpi0: wpi_init: could not configure device,
error 35
Apr 6 00:00:13 labrat kernel: wpi0: fatal firmware error
Apr 6 00:00:13 labrat kernel: firmware error log (count = 1):
Apr 6 00:00:13 labrat kernel: error type = "SYSASSERT" (0x00000005)
Apr 6 00:00:13 labrat kernel: error data = 0x000004F3
Apr 6 00:00:13 labrat kernel: branch link = 0x000008B600001F8A
Apr 6 00:00:13 labrat kernel: interrupt link = 0x0000032000000000
Apr 6 00:00:13 labrat kernel: time = 107
Apr 6 00:00:13 labrat kernel: driver status:
Apr 6 00:00:13 labrat kernel: tx ring 0: qid=0 cur=0 queued=0
Apr 6 00:00:13 labrat kernel: tx ring 1: qid=1 cur=0 queued=0
Apr 6 00:00:13 labrat kernel: tx ring 2: qid=2 cur=0 queued=0
Apr 6 00:00:13 labrat kernel: tx ring 3: qid=3 cur=0 queued=0
Apr 6 00:00:13 labrat kernel: tx ring 4: qid=4 cur=10 queued=0
Apr 6 00:00:13 labrat kernel: rx ring: cur=10
Apr 6 00:00:13 labrat wpa_supplicant[1186]: ioctl[SIOCS80211, op=103, val=0,
arg_len=128]: Device not configured
Apr 6 00:00:13 labrat wpa_supplicant[1186]: wlan0: Failed to initiate AP scan
Apr 6 00:00:14 labrat kernel: wpi0: wpi_send_rxon: could not set TX power,
error 35
...
This laptop is really old (SATA1 disk, first-gen Core2Duo CPU, 2GB of RAM)
so re-building system takes hours :(
But I could provide additional debug information.
--
Best regards,
Lev mailto:[email protected]
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "[email protected]"
