Hi, I'm trying to configure an ATH3980 as a wireless access point. I would like it to operate in N-only mode, but for some reason I can only make it work with GN.
Any advice as to how I can make this work would be very helpful. Thank You Benjamin Sauerhaft Coplon Here is the relevant section of /etc/rc.conf #Wireless wlans_ath0="wlan0" create_args_wlan0="wlanmode hostap" hostapd_enable="YES" ifconfig_wlan0="inet 10.0.0.1 netmask 255.255.255.0 ssid ishmael mode 11n" and here is the output of "ifconfig wlan0" wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 7c:c3:a1:b3:b3:06 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: IEEEwlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 7c:c3:a1:b3:b3:06 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap> status: running ssid ishmael channel 1 (2412 MHz 11g ht/20) bssid 7c:c3:a1:b3:b3:06 regdomain 100 indoor ecm authmode WPA2/802.11i privacy MIXED deftxkey 2 AES-CCM 2:128-bit txpower 20 scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 8 shortgi wme burst dtimperiod 1 -dfs groups: wlan _______________________________________________ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"