ok, so you've added the WB222 coex bits. Does ath3k load OK?
-a On Sun, 14 Apr 2019 at 09:02, Matthias Apitz <[email protected]> wrote: > El día domingo, abril 14, 2019 a las 08:56:52a. m. -0700, Adrian Chadd > escribió: > > > hi! > > > > Ok, so there's two parts: > > > > * loading in the firmware and/or bt nic setup (clock rate, etc) via > > ath3kfw; and > > * bluetooth coex/antenna setup in ath(4). > > > > The latter I can do. The former may require USB stack debugging. > > > > Which NIC is in the C720? Ar9485, right? > > $ dmesg | grep ath0 > ath0: <Atheros AR946x/AR948x> mem 0xe0400000-0xe047ffff at device 0.0 on > pci1 > ath0: Enabling WB222 BTCOEX > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] LDPC transmit/receive enabled > ath0: [HT] 2 RX streams; 2 TX streams > ath0: AR9460 mac 640.2 RF5110 phy 2456.12 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > > matthias > > > -- > Matthias Apitz, ✉ [email protected], http://www.unixarea.de/ > +49-176-38902045 > Public GnuPG key: http://www.unixarea.de/key.pub > 70 years of NATO - 70 years of wars (Jugoslavia, Afghanistan, Syria, ...) > and 70 years > of war preparation against Russia. -- PEACE instead of NATO !!! > _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
