Thanks Adrian,
Just wondering if there's anything I can do to help. I have the driver
repo.
Anthony
On 2020-09-13 14:53, Adrian Chadd wrote:
hi!
we're still working on this. It's going to take some time.
thanks,
-adrian
On Sun, 13 Sep 2020 at 11:12, Anthony Jenkins via freebsd-wireless
<freebsd-wireless@freebsd.org <mailto:freebsd-wireless@freebsd.org>>
wrote:
I have a Killer 1535 802.11ac wireless card (chipset = Qualcomm
Atheros
QCA6174). I am using the ath10k/athp driver from git repo
https://github.com/erikarn/athp.git . Driver loads, but trying to
start
the interface fails. What should I be looking at to fix this?
service netif start wlan2:
---------------------------------------------------------------------------
ifconfig: SIOCIFCREATE2: Input/output error
ifconfig: interface wlan2 does not exist
ifconfig: interface wlan2 does not exist
ifconfig: interface wlan2 does not exist
ifconfig: interface wlan2 does not exist
Starting wpa_supplicant.
/etc/rc.d/wpa_supplicant: WARNING: failed to start wpa_supplicant
ifconfig: interface wlan2 does not exist
rtsol: failed to get link layer information for wlan2
rtsol: failed to initialize wlan2
Starting Network: wlan2.
ifconfig: interface wlan2 does not exist
---------------------------------------------------------------------------
Kernel messages:
---------------------------------------------------------------------------
athp0: ath10k_start: called; state=0
athp0: ath10k_start: state=1
athp0: ath10k_download_cal_dt: TODO: device tree check
athp0: ath10k_wmi_event_service_ready_work: TODO: EEPROM code:
0x00000069
athp0: htc ep 2 out of TX credits (0 < 1)
athp0: htc ep 2 out of TX credits (0 < 1)
...
athp0: htc ep 2 out of TX credits (0 < 1)
athp0: htc ep 2 out of TX credits (0 < 1)
athp0: ath10k_wmi_cmd_send: failed (-35)
athp0: failed to enable PMF QOS: -35
athp0: ath10k_core_stop: state=1
athp0: ath10k_wait_for_suspend: state=1
athp0: ath10k_wmi_pdev_suspend_target: called
athp0: htc ep 2 out of TX credits (0 < 1)
athp0: htc ep 2 out of TX credits (0 < 1)
...
athp0: htc ep 2 out of TX credits (0 < 1)
athp0: htc ep 2 out of TX credits (0 < 1)
athp0: ath10k_wmi_cmd_send: failed (-35)
athp0: could not suspend target (-35)
athp0: ath10k_pci_irq_sync: TODO
athp0: ath10k_pci_kill_tasklet: called
athp0: ath10k_htt_tx_free: called
athp0: ath10k_htt_tx_free: tearing down htt locks
athp0: athp_vap_create: ath10k_start failed; ret=-35
---------------------------------------------------------------------------
Some notable errors from 'kldload if_athp.ko':
* Driver fails to load firmware file
athp_QCA6174_hw3.0/firmware-5.bin;
it does load file 'athp_QCA6174_hw3.0_firmware-4.bin'.
athp0: ath10k_fetch_fw_file: firmware_get: athp_cal-pci-athp0.bin
athp_cal-pci-athp0.bin: could not load firmware image, error 2
athp0: ath10k_fetch_fw_file: firmware_get:
athp_QCA6174_hw3.0_board.bin
firmware: 'athp_QCA6174_hw3.0_board.bin' version 1: 8124 bytes
loaded at
0xffffffff84458000
athp0: ath10k_fetch_fw_file: firmware_get:
athp_QCA6174_hw3.0_firmware-5.bin
athp_QCA6174_hw3.0_firmware-5.bin: could not load firmware image,
error 2
athp0: could not fetch firmware file
'athp_QCA6174_hw3.0/firmware-5.bin': -1
athp0: ath10k_fetch_fw_file: firmware_get:
athp_QCA6174_hw3.0_firmware-4.bin
firmware: 'athp_QCA6174_hw3.0_firmware-4.bin' version 1: 733784 bytes
loaded at 0xffffffff8445d000
I assume file 'athp_cal-pci-athp0.bin' is optional calibration data.
* 'htc ep 2 out of TX credits (0 < 1)' repeated 144 times
* ath10k_wmi_cmd_send failure
athp0: ath10k_wmi_cmd_send: failed (-35)
athp0: could not suspend target (-35)
My full kernel messages from kldload(8) and netif are at
http://www.qtchat.org/~ajenkins/ .
Thanks,
Anthony Jenkins
_______________________________________________
freebsd-wireless@freebsd.org <mailto:freebsd-wireless@freebsd.org>
mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to
"freebsd-wireless-unsubscr...@freebsd.org
<mailto:freebsd-wireless-unsubscr...@freebsd.org>"
_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"