Stefan Parvu wrote on 2020/01/10 10:31:
Hi,
Under the documentation [1] there are pointers about how one would define an
interface for all domUs.
Now the documentation says:
# sysrc cloned_interfaces="bridge0"
# sysrc ifconfig_bridge0="addm em0 SYNCDHCP"
# sysrc ifconfig_em0=“up”
where em0 is the main interface.
Now I have server which has a functional em1 interface running and configured.
I want to define a bridge0 interface for all domains, but not to use DHCP,
because I dont have a DHCP server on that network.
Any ideas how shall I configure the bridge0 interface using
ifconfig_bridge0=“..."
Just remove SYNCDHCP
For example:
cloned_interfaces="bridge0 tap0"
ifconfig_bridge0="addm bge0 up addm tap0 up"
It will create bridge0 with bge0 and tap0 as a members.
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 02:71:2c:00:ca:00
nd6 options=9<PERFORMNUD,IFDISABLED>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 2000000
member: bge0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 55
Kind regards
Miroslav Lachman
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-xen
To unsubscribe, send any mail to "[email protected]"
