On 2021-01-14 12:19 a.m., Roger Pau Monné wrote:
On Tue, Jan 12, 2021 at 11:12:15AM -0800, Kevin G. Eliuk wrote:
It's kind of hard to tell what's going on without you providing almost
any info, but are you maybe booting using UEFI?
Oops a newbie mistake
Roger.
I was able to get things working by wiping the drive and re-installing
FreeBSD 12 and selecting to encrypt the zfs file system.
Original message:
I had a working Xen Dom0 host running on a system which had been sitting
idle for a while. I had forgotten the passphrase for the encrypted
drive so I did a reinstall to get back to work with it.
After the install and reboot I followed the instructions (multiple
times) from FreeBSD as a Xen-Host. but every reboot I have to unset the
xen_kernel configuration because I get the following.
Loading Xen kernel
Failed to load Xen, kernel '/boot/xen'
can't load 'kernel'
I'm stumped. Thanks for any help or suggestions for next steps.
*# uname -a*
FreeBSD freexen 12.2-RELEASE FreeBSD 12.2-RELEASE r366954 GENERIC amd64
--
*# pkg info | grep xen*
xen-kernel-4.14.0 Hypervisor using a microkernel design
xen-tools-4.14.0_1 Xen management tools
*# dmesg*
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE r366954 GENERIC amd64
FreeBSD clang version 10.0.1 (g...@github.com:llvm/llvm-project.git
llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (3591.76-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended
Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
Structured Extended
Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33264410624 (31723 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM SLIC-BPC>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 7 6 2 3 4 5
Timecounter "TSC-low" frequency 1795880018 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi0: Power Button (fixed)
can't fetch resources for \134_SB_.PCI0.LPCB.LDRC -
AE_AML_INVALID_RESOURCE_TYPE
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7c34000-0xf7c37fff irq 16 at
device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c20000-0xf7c2ffff irq
16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem
0xf7c3e000-0xf7c3efff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem
0xf7c00000-0xf7c1ffff,0xf7c3d000-0xf7c3dfff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: c4:34:6b:58:35:fa
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c3c000-0xf7c3c3ff
irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c30000-0xf7c33fff irq 22 at
device 27.0 on pci0
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c3b000-0xf7c3b3ff
irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port
0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem
0xf7c3a000-0xf7c3a7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC221 (Analog)> at nid 23 and 27,26 on hdaa1
pcm2: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
cd0 at ahcich1 bus 0 scbus0 target 0 lun 0
cd0: <hp DVDRAM GTA0N HB03> Removable CD-ROM SCSI device
cd0: Serial Number 424CP018175
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD10EFRX-68FYTN0 82.00A82> ACS-2 ATA SATA 3.x device
ada0: Serial Number WD-WCC4J4JAJLNL
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ses0: pass0,cd0 in 'Slot 01', SATA Slot: scbus0 target 0
ses0: pass1,ada0 in 'Slot 02', SATA Slot: scbus1 target 0
uhub2: 21 ports with 21 removable, self powered
Root mount waiting for: usbus0 usbus1 usbus2
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 1> on usbus0
kbd2 at ukbd0
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on
usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on
usbus1
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2
uhub3: 8 ports with 8 removable, self powered
bridge0: Ethernet address: 02:cb:af:39:8b:00
lo0: link state changed to UP
em0: link state changed to UP
em0: link state changed to DOWN
bridge0: link state changed to UP
em0: promiscuous mode enabled
em0: link state changed to UP
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 1> on usbus0
ums0: 18 buttons and [XYZT] coordinates ID=2
Security policy loaded: MAC/ntpd (mac_ntpd)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
All buffers synced.
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE r366954 GENERIC amd64
FreeBSD clang version 10.0.1 (g...@github.com:llvm/llvm-project.git
llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (3591.75-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended
Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
Structured Extended
Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33264410624 (31723 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM SLIC-BPC>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 4 5 6 3 7 2
Timecounter "TSC-low" frequency 1795876522 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi0: Power Button (fixed)
can't fetch resources for \134_SB_.PCI0.LPCB.LDRC -
AE_AML_INVALID_RESOURCE_TYPE
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7c34000-0xf7c37fff irq 16 at
device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c20000-0xf7c2ffff irq
16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem
0xf7c3e000-0xf7c3efff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem
0xf7c00000-0xf7c1ffff,0xf7c3d000-0xf7c3dfff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: c4:34:6b:58:35:fa
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c3c000-0xf7c3c3ff
irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c30000-0xf7c33fff irq 22 at
device 27.0 on pci0
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c3b000-0xf7c3b3ff
irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port
0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem
0xf7c3a000-0xf7c3a7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC221 (Analog)> at nid 23 and 27,26 on hdaa1
pcm2: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD10EFRX-68FYTN0 82.00A82> ACS-2 ATA SATA 3.x device
ada0: Serial Number WD-WCC4J4JAJLNL
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ses0: pass0,cd0 in 'Slot 01', SATA Slot: scbus0 target 0
ses0: pass1,ada0 in 'Slot 02', SATA Slot: scbus1 target 0
cd0 at ahcich1 bus 0 scbus0 target 0 lun 0
cd0: <hp DVDRAM GTA0N HB03> Removable CD-ROM SCSI device
cd0: Serial Number 424CP018175
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus0 usbus1 usbus2
uhub2: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 1> on usbus0
kbd2 at ukbd0
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on
usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on
usbus2
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2
uhub4: 8 ports with 8 removable, self powered
bridge0: Ethernet address: 02:cb:af:39:8b:00
lo0: link state changed to UP
bridge0: link state changed to UP
em0: promiscuous mode enabled
em0: link state changed to UP
ums0 on uhub0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 1> on usbus0
ums0: 18 buttons and [XYZT] coordinates ID=2
Security policy loaded: MAC/ntpd (mac_ntpd)
--
*# acpidump -t | grep -5 DMAR*
DMAR: Length=184, Revision=1, Checksum=187,
OEMID=INTEL, OEM Table ID=HSW, OEM Revision=0x1,
Creator ID=INTL, Creator Revision=0x1
Host Address Width=39
Flags={INTR_REMAP}
--
*# cat /boot/loader.conf*
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
opensolaris_load="YES"
zfs_load="YES"
xen_kernel="/boot/xen"
xen_cmdline="iommu=debug,force dom0_mem=4096M dom0_max_vcpus=2 dom0=pvh
console=com1,vga com1=115200,8n1 guest_loglvl=all loglvl=all"
if_tap_load="YES"
verbose_loading="YES"
--
*# sysrc -a*
cloned_interfaces: bridge0
dumpdev: AUTO
hostname: freexen
ifconfig_bridge0: addm em0 SYNCDHCP
ifconfig_em0: up
ifconfig_em0_ipv6: inet6 accept_rtadv
ntpd_enable: YES
ntpdate_enable: YES
powerd_enable: YES
sshd_enable: YES
xen_kernel: /boot/xen
xencommons_enable: YES
zfs_enable: YES
--
# tail -2 c/sysctl.conf
vfs.zfs.min_auto_ashift=12
vm.max_wired=-1
--
*# tail -2 /etc/ttys*
dcons "/usr/libexec/getty std.9600" vt100 off secure
xc0 "/usr/libexec/getty Pc" xterm onifconsole secure
Regards, --
*Kevin Eliuk*
_______________________________________________
freebsd-xen@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-xen
To unsubscribe, send any mail to "freebsd-xen-unsubscr...@freebsd.org"
