> > xen_cmdline="dom0_mem=2048M dom0_max_vcpus=1 dom0=pvh com1=115200,8n1 > > guest_loglvl=all loglvl=all console=vga,com1" > Can you try adding 'watchdog' to xen_cmdline and see if that forces > the box to reboot after it goes black? > > If Xen is able to boot, and the problem is with FreeBSD dom0 you might > try also adding vga=keep to xen_cmdline, that way we might get some > output from dom0 (if that's indeed where the issue is happening). > > > xen-kernel version = 4.14.1_1 > > xen-tools version = 4.14.1_1 > > > > Both installed from packages, rather than ports. > > > > These boxes are Intel NUCs that I normally manage over intel AMT using mesh > > commander. I tried enabling the virtual serial port through AMT but no > > dice. > > I never tried using the AMT serial port, first thing would be to get > it to work with plain FreeBSD, then we can see about getting it > working with Xen. FWIW, a lot of the test boxes I work with use SoL, > and I would expect the AMT serial to work as well.
No dice on the AMT serial port, but I have been less than impressed with MeshCommander and AMT thus far. > > > I know the nucs have a hardware serial port, but I don't have the > > cable to attach to the header at the moment. I have ordered some headers > > and crimp pins to attach to the serial port for more debugging, but they > > will not get here for about a week. > > I did the original EFI work on a NUC7i7DNHE using the serial port. > Last time I tried HDMI worked with Xen. I was able to get the hardware serial port working. turned out I had a typo in my /boot/loader.conf. Commconsole instead of comconsole. That also flagged a different error that revealed that vidconsole should be replaced with efi on UEFI systems > > > I also tried connecting directly to the NUC's HDMI port but I just got a > > blank screen again, after all the boot messages appeared. > > Are those messages that you see Xen boot messages or FreeBSD boot > messages? > > Does the box reboot itself? No > > I'm afraid we will require some more information to help diagnose > what's going on. Tried adding both of the options that you mentioned above to xen_cmdline with no appreciable difference. The system did not appear to attempt to reboot itself. See serial console output below. After the Beastie menu, I get the following output on both HDMI and serial consoles, and then no further output on the serial console, while the HDMI console goes blank. Loading Xen kernel... /boot/xen data=0x26b9a8+0x146658 - Loading kernel... /boot/kernel/kernel size=0x1debd70 Loading configured modules... /boot/entropy size=0x1000 /etc/hostid size=0x25 EFI framebuffer information: addr, size 0x4000000000, 0x1d4c00 dimensions 800 x 600 stride 800 masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 I am happy to do additional debugging, but I personally am out of my depth here. Thank you Stephen _______________________________________________ freebsd-xen@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-xen To unsubscribe, send any mail to "freebsd-xen-unsubscr...@freebsd.org"
