aqui esta parte da saida do pnpinfo:

Logical Device ID: CTL2011 0x11208c0e #1
Compatible Device ID: PNP0600 (0006d041)
Device Description: IDE
TAG Start DF
Good Configuration
    IRQ: 10  - only one type (true/edge)
    I/O Range 0x168 .. 0x168, alignment 0x1, len 0x8
        [16-bit addr]
    I/O Range 0x36e .. 0x36e, alignment 0x1, len 0x2
        [16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 11  - only one type (true/edge)
    I/O Range 0x1e8 .. 0x1e8, alignment 0x1, len 0x8
        [16-bit addr]
    I/O Range 0x3ee .. 0x3ee, alignment 0x1, len 0x2
        [16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 10 11 15  - only one type (true/edge)
    I/O Range 0x180 .. 0x1b8, alignment 0x8, len 0x8
        [16-bit addr]
    I/O Range 0x306 .. 0x33e, alignment 0x8, len 0x2
        [16-bit addr]
TAG Start DF
Sub-optimal Configuration
    IRQ: 15  - only one type (true/edge)
    I/O Range 0x170 .. 0x170, alignment 0x1, len 0x8
        [16-bit addr]
    I/O Range 0x376 .. 0x376, alignment 0x1, len 0x1
        [16-bit addr]
TAG End DF

alguem sabe como devo botar no device.hints?
por acaso seria assim:
hint.ata.2.at="isa"
hint.ata.2.port="0x168"
hint.ata.2.irq="10"


muito obrigado pela ajuda

Mosconi

_______________________________________________________________
Para enviar um novo email para a lista: freebsd@fug.com.br
Sair da Lista: http://mail.fug.com.br/mailman/listinfo/freebsd_fug.com.br
Historico: http://www4.fugspbr.org/lista/html/FUG-BR/

Responder a