Eu tive um problema similar com uma unidade LTO. Resolvi desligando na controladora SCSI a função WIDE-NEGOCIATION
Tente isso e retorne o resultado. X 2007/8/16, Marcio Toledo <[EMAIL PROTECTED]>: > On Thu, 16 Aug 2007 13:15:30 -0300, Diego Augusto Dalmolin wrote > > veja esse esquema de formatar a fita.. setar a densidade.. etc > > > > caso continue com o problema.. é possivel que seu drive esteja com > > problema mesmo. > > os leds dele não estão indicando limpeza (mesmo que não esteja, vc já > > tentou utilizar a fita de limpeza?) > > > Ola Diego > > foi a 1a coisa que fiz.... > Os LED´s estão ok. Ela começa a fazer o backup mas, ai pára com o erro que > enviei... > > Abraços > > att > > Diego > > > > On 8/16/07, Marcio Toledo <[EMAIL PROTECTED]> wrote: > > > On Thu, 16 Aug 2007 11:37:12 -0300, Márcio Luciano Donada wrote > > > > -----BEGIN PGP SIGNED MESSAGE----- > > > > Hash: SHA1 > > > > > > > > Marcio Toledo escreveu: > > > > > On Thu, 16 Aug 2007 10:42:51 -0300, Márcio Luciano Donada wrote > > > > > > > > > > > > > > >> Ele começa a fazer o backup e em dado momento pára e dá isso: > > > > > > > > > >> (sa0:mpt1:0:0:0): failed to write terminating filemark(s) > > > > >> (sa0:mpt1:0:0:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0 > > > > >> (sa0:mpt1:0:0:0): CAM Status: SCSI Status Error (sa0:mpt1:0:0:0): > > > > >> SCSI Status: Check Condition (sa0:mpt1:0:0:0): MEDIUM ERROR > > > > >> info:2 asc:52,0 (sa0:mpt1:0:0:0): Cartridge fault > > > > >> (sa0:mpt1:0:0:0): Retries Exhausted (sa0:mpt1:0:0:0): failed to > > > > >> write terminating filemark(s) camomila# > > > > > > > > Marcio, > > > > Geralmente eu faço > > > > > > > > # cd / > > > > # tar -cvf /dev/sa0 ./home ./var > > > > > > > > Mas será que não é um problema na mídia? Você tem outra para testar? > > > > > > Já tentei várias, xará.... > > > > > > Aí vai o dmesg: > > > > > > Copyright (c) 1992-2005 The FreeBSD Project. > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > > The Regents of the University of California. All rights reserved. > > > FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 > > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > > > ACPI APIC Table: <A M I OEMAPIC > > > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > > CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz 686-class CPU) > > > Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 > > > > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > > Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> > > > AMD Features=0x20100000<NX,LM> > > > Hyperthreading: 2 logical CPUs > > > real memory = 2147352576 (2047 MB) > > > avail memory = 2096541696 (1999 MB) > > > ioapic0 <Version 2.0> irqs 0-23 on motherboard > > > ioapic1 <Version 2.0> irqs 24-47 on motherboard > > > ioapic2 <Version 2.0> irqs 48-71 on motherboard > > > npx0: [FAST] > > > npx0: <math processor> on motherboard > > > npx0: INT 16 interface > > > acpi0: <A M I OEMRSDT> on motherboard > > > acpi0: Power Button (fixed) > > > pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 > > > pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 > > > pci_link2: <ACPI PCI Link LNKC> irq 15 on acpi0 > > > pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0 > > > pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 > > > pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 > > > pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 > > > pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0 > > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > > > cpu0: <ACPI CPU> on acpi0 > > > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > > pci0: <ACPI PCI bus> on pcib0 > > > pci0: <unknown> at device 0.1 (no driver attached) > > > pci0: <base peripheral> at device 1.0 (no driver attached) > > > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 > > > pci1: <ACPI PCI bus> on pcib1 > > > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > > > pci2: <ACPI PCI bus> on pcib2 > > > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xc800-0xc8ff mem > > > 0xfcec0000-0xfcecffff,0xfceb0000-0xfcebffff irq 26 at device 5.0 on pci2 > > > mpt0: [GIANT-LOCKED] > > > mpt0: MPI Version=1.2.14.0 > > > mpt0: Unhandled Event Notify Frame. Event 0xa. > > > mpt0: Capabilities: ( RAID-0 SAFTE ) > > > mpt0: 0 Active Volumes (1 Max) > > > mpt0: 0 Hidden Drive Members (6 Max) > > > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xcc00-0xccff mem > > > 0xfcef0000-0xfcefffff,0xfcee0000-0xfceeffff irq 25 at device 5.1 on pci2 > > > mpt1: [GIANT-LOCKED] > > > mpt1: MPI Version=1.2.14.0 > > > mpt1: Unhandled Event Notify Frame. Event 0xa. > > > mpt1: Capabilities: ( RAID-0 SAFTE ) > > > mpt1: 0 Active Volumes (1 Max) > > > mpt1: 0 Hidden Drive Members (6 Max) > > > pci1: <base peripheral, interrupt controller> at device 0.1 (no driver > attached) > > > pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 > > > pci3: <ACPI PCI bus> on pcib3 > > > pci1: <base peripheral, interrupt controller> at device 0.3 (no driver > attached) > > > pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 > > > pci4: <ACPI PCI bus> on pcib4 > > > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0 > > > pci5: <ACPI PCI bus> on pcib5 > > > pci5: <network, ethernet> at device 0.0 (no driver attached) > > > pcib6: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0 > > > pci6: <ACPI PCI bus> on pcib6 > > > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xb880-0xb89f irq > > > 16 > > > at device 29.0 on pci0 > > > uhci0: [GIANT-LOCKED] > > > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > > > usb0: USB revision 1.0 > > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub0: 2 ports with 2 removable, self powered > > > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbc00-0xbc1f irq > > > 19 > > > at device 29.1 on pci0 > > > uhci1: [GIANT-LOCKED] > > > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > > > usb1: USB revision 1.0 > > > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub1: 2 ports with 2 removable, self powered > > > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbc80-0xbc9f irq > > > 18 > > > at device 29.2 on pci0 > > > uhci2: [GIANT-LOCKED] > > > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > > > usb2: USB revision 1.0 > > > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub2: 2 ports with 2 removable, self powered > > > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfccfec00-0xfccfefff irq > > > 23 at > > > device 29.7 on pci0 > > > ehci0: [GIANT-LOCKED] > > > usb3: EHCI version 1.0 > > > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > > > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > > > usb3: USB revision 2.0 > > > uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > > > uhub3: 6 ports with 6 removable, self powered > > > pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > > > pci7: <ACPI PCI bus> on pcib7 > > > em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port > > > 0xec80-0xecbf mem 0xfebe0000-0xfebfffff irq 16 at device 4.0 on pci7 > > > em0: Ethernet address: 00:04:23:c1:94:a6 > > > em0: Speed:N/A Duplex:N/A > > > pci7: <display, VGA> at device 12.0 (no driver attached) > > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > > isa0: <ISA bus> on isab0 > > > atapci0: <Intel ICH5 UDMA100 controller> port > > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 > > > ata0: <ATA channel 0> on atapci0 > > > ata1: <ATA channel 1> on atapci0 > > > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > > > acpi_button0: <Power Button> on acpi0 > > > acpi_button1: <Sleep Button> on acpi0 > > > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > > kbd0 at atkbd0 > > > atkbd0: [GIANT-LOCKED] > > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > > > acpi0 > > > sio0: type 16550A > > > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > > > sio1: type 16550A > > > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 > on acpi0 > > > fdc0: [FAST] > > > pmtimer0 on isa0 > > > orm0: <ISA Option ROMs> at iomem > > > 0xc0000-0xca7ff,0xca800-0xce7ff,0xce800-0xcf7ff,0xcf800-0xd07ff on isa0 > > > ppc0: parallel port not found. > > > sc0: <System console> at flags 0x100 on isa0 > > > sc0: VGA <16 virtual consoles, flags=0x300> > > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > > Timecounter "TSC" frequency 2793015400 Hz quality 800 > > > Timecounters tick every 1.000 msec > > > Waiting 5 seconds for SCSI devices to settle > > > acd0: CDRW <HL-DT-ST RW/DVD GCC-4521B/1.05> at ata0-master UDMA33 > > > sa0 at mpt1 bus 0 target 0 lun 0 > > > sa0: <SONY SDX-450V 0100> Removable Sequential Access SCSI-2 device > > > sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) > > > ses0 at mpt0 bus 0 target 8 lun 0 > > > ses0: <ESG-SHV SCA HSBP M26 1.0B> Fixed Processor SCSI-2 device > > > ses0: 3.300MB/s transfers > > > ses0: SAF-TE Compliant Device > > > da0 at mpt0 bus 0 target 10 lun 0 > > > da0: <SEAGATE ST3146707LC 0003> Fixed Direct Access SCSI-3 device > > > da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing > Enabled > > > da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) > > > da1 at mpt0 bus 0 target 11 lun 0 > > > da1: <SEAGATE ST3146707LC 0003> Fixed Direct Access SCSI-3 device > > > da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing > Enabled > > > da1: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) > > > Trying to mount root from ufs:/dev/da0s1a > > > em0: link state changed to UP > > > > > > > Passa pra gente o dmesg da máquina. > > > > > > > > Abraço, > > > > > > > > -----BEGIN PGP SIGNATURE----- > > > > Version: GnuPG v1.4.5 (MingW32) > > > > > > > > iD8DBQFGxGEXbjyCr4Ixg0wRAj77AJ9u3qPRRLOBDUP5XBUjvu4ZLwAyXgCdFC7q > > > > OogYNOkBP2MJ9Y9vK7jHSko= > > > > =3p0I > > > > -----END PGP SIGNATURE----- > > > > > > > > ------------------------- > > > > Histórico: http://www.fug.com.br/historico/html/freebsd/ > > > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > > > > > > > > Engº Marcio Toledo > > > Analista de Informática - Área de redes > > > Serviço Técnico de Informática > > > Faculdade de Ciênncias Farmacêuticas - UNESP > > > Tel: 0xx-16-3301-6939 > > > > > > ------------------------- > > > Histórico: http://www.fug.com.br/historico/html/freebsd/ > > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > > > > > > -- > > -------------------------------------------------- > > Diego Augusto Dalmolin > > Certificado LINUX LPI > > Certificado Mandriva > > CCNA Mods 1,2,3 > > Cel: (41) 8436-2448 > > Msn: [EMAIL PROTECTED] > > Mail: [EMAIL PROTECTED] > > ------------------------- > > Histórico: http://www.fug.com.br/historico/html/freebsd/ > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > > Engº Marcio Toledo > Analista de Informática - Área de redes > Serviço Técnico de Informática > Faculdade de Ciênncias Farmacêuticas - UNESP > Tel: 0xx-16-3301-6939 > > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > -- Cordialmente, x86br ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
