Cara lembro de ter lido que chips Xpress200 são incompativeis, lembro de ter lido aqui mesmo na Lista do Fug... e uma busca na lista. verifica se não está faltando alguma biblioteca OpenGL no seu sistema...
Até mais. 2008/5/30 Hallan S. Silva <[EMAIL PROTECTED]>: > ----- Mensagem original ---- > > De: Paulo Henrique <[EMAIL PROTECTED]> > Para: Lista Brasileira de Discussão sobre FreeBSD (FUG-BR) < > freebsd@fug.com.br> > Enviadas: Sexta-feira, 30 de Maio de 2008 14:22:36 > Assunto: Re: [FUG-BR] problemas mplayer FreeBSD 7 > > Qual o chip gráfico do seu note equal o driver que está usando no Xorg, já > fez testes como Xine, > > Até mais... > > 2008/5/30 Hallan S. Silva <[EMAIL PROTECTED]>: > > > Olá a todos, > > > > Uso um laptop acer aspire 3650 e tenho o FreeBSD 7.0 instalado.. A placa > de > > video está configurada e a tela está em 1280x800 pixels... > > > > Estou tendo um problema com o mplayer, na hora de tocar o video ele > mostra > > a imagem em "código de barras", o som ele toca bem. Alguém teve este > mesmo > > problema ? Atualizei a arvore ports e fiz um update no mplayer, mas o > > problema continua. Alguém teria uma solução? > > > > Obrigado, > > > > Hallan > > > > > > > > Então, > > > Os vídeos também não funcionaram no xine: as imagens estão desconfiguradas, > e saem em forma de "códigos de barra". > > O meu note tem o chip gráfico ATI radeon xpress 200M, segue parte do meu > /etc/X11/xorg.conf: > > > > 303 # > ********************************************************************** > 304 # Monitor section > 305 # > ********************************************************************** > 306 > 307 # Any number of monitor sections may be present > 308 > 309 Section "Monitor" > 310 > 311 Identifier "My Monitor" > 312 > 313 # HorizSync is in kHz unless units are specified. > 314 # HorizSync may be a comma separated list of discrete values, or a > 315 # comma separated list of ranges of values. > 316 # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR > MONITOR'S > 317 # USER MANUAL FOR THE CORRECT NUMBERS. > 318 > 319 HorizSync 31.5 > 320 > 321 # HorizSync 30-64 # multisync > 322 # HorizSync 31.5, 35.2 # multiple fixed sync frequencies > 323 # HorizSync 15-25, 30-50 # multiple ranges of sync > frequencies > 324 > 325 # VertRefresh is in Hz unless units are specified. > 326 # VertRefresh may be a comma separated list of discrete values, or > a > 327 # comma separated list of ranges of values. > 328 # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR > MONITOR'S > 329 # USER MANUAL FOR THE CORRECT NUMBERS. > 330 > 331 VertRefresh 50-70 > 332 > 333 EndSection > 334 > 335 > 336 # > ********************************************************************** > 337 # Graphics device section > 338 # > ********************************************************************** > 339 > 340 # Any number of graphics device sections may be present > 341 > 342 # Standard VGA Device: > 343 > 344 Section "Device" > 345 Identifier "Standard VGA" > 346 VendorName "Unknown" > 347 BoardName "Unknown" > 348 > 349 # The chipset line is optional in most cases. It can be used to > override > 350 # the driver's chipset detection, and should not normally be > specified. > 351 > 352 # Chipset "generic" > 353 > 354 # The Driver line must be present. When using run-time loadable > driver > 355 # modules, this line instructs the server to load the specified > driver > 356 # module. Even when not using loadable driver modules, this line > 357 # indicates which driver should interpret the information in this > section. > 358 > 359 Driver "vga" > 360 # The BusID line is used to specify which of possibly multiple > devices > 361 # this section is intended for. When this line isn't present, a > device > 362 # section can only match up with the primary video device. For > PCI > 363 # devices a line like the following could be used. This line > should not > 364 # normally be included unless there is more than one video device > 365 # intalled. > 366 > 367 # BusID "PCI:0:10:0" > 368 > 369 # VideoRam 256 > 370 > 371 # Clocks 25.2 28.3 > 372 > 373 EndSection > 374 > 375 # Device configured by xorgconfig: > 376 > 377 Section "Device" > 378 Identifier "** ATI Radeon (generic) [radeon]" > 379 Driver "radeon" > 380 #VideoRam 65536 > 381 # Insert Clocks lines here if appropriate > 382 EndSection > 383 > 384 > 385 # > ********************************************************************** > 386 # Screen sections > 387 # > ********************************************************************** > 388 > 389 # Any number of screen sections may be present. Each describes > 390 # the configuration of a single screen. A single specific screen > section > 391 # may be specified from the X server command line with the > "-screen" > 392 # option. > 393 Section "Screen" > 394 Identifier "Screen 1" > 395 Device "** ATI Radeon (generic) [radeon]" > 396 Monitor "My Monitor" > 397 DefaultDepth 24 > 398 > 399 Subsection "Display" > 400 Depth 8 > 401 Modes "1280x1024" "1024x768" "800x600" "640x480" > 402 ViewPort 0 0 > 403 EndSubsection > 404 Subsection "Display" > 405 Depth 16 > 406 Modes "1280x1024" "1024x768" "800x600" "640x480" > 407 ViewPort 0 0 > 408 EndSubsection > 409 Subsection "Display" > 410 Depth 24 > 411 Modes "1280x1024" "1024x768" "800x600" "640x480" > 412 ViewPort 0 0 > 413 EndSubsection > 414 EndSection > > > > Tem alguma idéia do que possa ser? > > Obrigado, > > -- > Hallan > > > > Abra sua conta no Yahoo! Mail, o único sem limite de espaço para > armazenamento! > http://br.mail.yahoo.com/ > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > -- Atenciosamente Paulo Henrique. ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
