On Wed, October 15, 2008 10:53 am, Vinícius Abrahão wrote: > Olá Matheus, > > Checa como está o seu ppp.conf > aqui meu modem reconhecem em ucom0, mas tenho que usar: > set device /dev/cuaU0 > Qualquer coisa posta o seu ppp.conf pra gente ver oque pode ser. > > > Abs, > Vinícius Schmidt
xxx# cat ppp.conf ppp.link* ################################################################# # PPP Sample Configuration File # Originally written by Toshiharu OHNO # Simplified 5/14/1999 by [EMAIL PROTECTED] # # See /usr/share/examples/ppp/ for some examples # # $FreeBSD: src/etc/ppp/ppp.conf,v 1.10 2004/11/19 17:12:56 obrien Exp $ ################################################################# # Re writted by JavaNunes for MODEM HUAWEI E226 TIM default: set log Phase Chat LCP IPCP CCP tun command set device /dev/cuaU0 # set speed 236800 set speed sync set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT \ OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" claro: set authname claro set authkey claro set phone *99***1\# set login "TIMEOUT 10 \"\" \"\" \ CAUSE ERROR PLEASE NO CHANGE! gin:--gin: \\U word: \\P" set timeout 1 set ifaddr 10.0.0.1/0 127.0.0.1/0 255.255.255.0 0.0.0.0 #set ifaddr 10.0.0.1/0 # add default HISADDR enable dns default: shell logger "LABEL down (up UPTIME): OCTETSIN received, OCTETSOUT sent" claro: shell route delete default claro: shell route delete default shell route add default -interface INTERFACE ainad, nada funca :( matheus > On 10/14/08, Nenhum_de_Nos <[EMAIL PROTECTED]> wrote: >> hail, >> >> li http://sites.google.com/site/javanunes/huawei-e226-no-bsd e consegui >> colocar para funcionar em um notebook com 7-STABLE. mas tento repetir o >> feito em um pentium II que seria um roteador e nada: >> >> ucom0: <HUAWEI Technologies HUAWEI Mobile, class 0/0, rev 1.10/0.00, >> addr >> 2> on uhub0 >> ucom0: Could not find interrupt in >> device_attach: ucom0 attach returned 6 >> ucom0: at uhub0 port 2 (addr 2) disconnected >> ucom0: <HUAWEI Technologies HUAWEI Mobile, class 0/0, rev 1.10/0.00, >> addr >> 2> on uhub0 >> ucom0: ubsa_request: STALLED >> ucom0: ubsa_request: STALLED >> (repete muito) >> ucom0: ubsa_request: STALLED >> ucom0: at uhub0 port 2 (addr 2) disconnected >> ucom0: detached >> >> estou usando o mesmo ppp.conf e ppp.link(up e down) >> >> vez por outra ele reclada do disp serial: >> >> Oct 14 13:15:54 xxx ppp[3722]: tun0: Warning: deflink: Unable to set >> physical to speed 0 >> Oct 14 13:15:54 xxx ppp[3722]: tun0: Phase: deflink: Disconnected! >> Oct 14 13:15:54 xxx ppp[3722]: tun0: Warning: deflink: Unable to set >> physical to speed 0 >> >> alguém sabe se ele não gosta de usb antigo ? testarei num pc mais novo >> qd >> puder desligá-lo. mas já até pensei em comprar uma placa usb 2.0 só para >> isso, mas queria ter certeza antes. >> >> se alguém tiver alguma luz :) >> >> obrigado ;) >> >> matheus >> -- >> We will call you cygnus, >> The God of balance you shall be >> >> ------------------------- >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >> > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > -- We will call you cygnus, The God of balance you shall be ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd