> Bom dia amigos, > Renato esse Dell PowerEdge 1950 funciona tudo out off box, ou seja, direto > da embalagem pra o FreeBSD 7 sem gambi? > > Cleber
Cleber, Veja a saída do dmesg em um Dell 2850 rodando FreeBSD-Current para testes do zfs (instalado sem qualquer "gambi" - it just works !): Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Mon Feb 2 15:17:20 BRST 2009 r...@mail2.xxxx.com.br:/usr/src/sys/amd64/compile/mail Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf48 Stepping = 8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant Cores per package: 2 Logical CPUs per core: 2 usable memory = 4280885248 (4082 MB) avail memory = 4125200384 (3934 MB) ACPI APIC Table: <DELL PE BKC > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic2: Changing APIC ID to 10 ioapic3: Changing APIC ID to 11 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard ioapic3 <Version 2.0> irqs 96-119 on motherboard kbd1 at kbdmux0 acpi0: <DELL PE BKC> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 amr0: <LSILogic MegaRAID 1.53> mem 0xf80f0000-0xf80fffff,0xfe9c0000-0xfe9fffff irq 46 at device 14.0 on pci2 amr0: Using 64-bit DMA amr0: [ITHREAD] amr0: delete logical drives supported by controller amr0: <LSILogic PERC 4e/Di> Firmware 521X, BIOS H430, 256MB RAM pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 pci6: <ACPI PCI bus> on pcib6 em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xecc0-0xecff mem 0xfe6e0000-0xfe6fffff irq 64 at device 7.0 on pci6 em0: [FILTER] em0: Ethernet address: 00:13:72:5f:a1:b3 pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 pci7: <ACPI PCI bus> on pcib7 em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xdcc0-0xdcff mem 0xfe4e0000-0xfe4fffff irq 65 at device 8.0 on pci7 em1: [FILTER] em1: Ethernet address: 00:13:72:5f:a1:b4 pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8 pci10: <ACPI PCI bus> on pcib10 ahd0: <Adaptec 39320 Ultra320 SCSI adapter> port 0xcc00-0xccff,0xc800-0xc8ff mem 0xfe1fe000-0xfe1fffff irq 101 at device 3.0 on pci10 ahd0: [ITHREAD] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs ahd1: <Adaptec 39320 Ultra320 SCSI adapter> port 0xc400-0xc4ff,0xc000-0xc0ff mem 0xfe1fc000-0xfe1fdfff irq 102 at device 3.1 on pci10 ahd1: [ITHREAD] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x9ce0-0x9cff irq 16 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x0f10 usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x9cc0-0x9cdf irq 19 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0f10 usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x9ca0-0x9cbf irq 18 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0f10 usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfeb00000-0xfeb003ff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib11 vgapci0: <VGA-compatible display> port 0xac00-0xacff mem 0xf0000000-0xf7ffffff,0xfdef0000-0xfdefffff irq 18 at device 13.0 on pci11 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr e2800000e28 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr e2800000e28 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr e2800000e28 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr e2800000e28 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 cpu4: <ACPI CPU> on acpi0 est4: <Enhanced SpeedStep Frequency Control> on cpu4 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr e2800000e28 device_attach: est4 attach returned 6 p4tcc4: <CPU Frequency Thermal Control> on cpu4 cpu5: <ACPI CPU> on acpi0 est5: <Enhanced SpeedStep Frequency Control> on cpu5 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr e2800000e28 device_attach: est5 attach returned 6 p4tcc5: <CPU Frequency Thermal Control> on cpu5 cpu6: <ACPI CPU> on acpi0 est6: <Enhanced SpeedStep Frequency Control> on cpu6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr e2800000e28 device_attach: est6 attach returned 6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 cpu7: <ACPI CPU> on acpi0 est7: <Enhanced SpeedStep Frequency Control> on cpu7 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr e2800000e28 device_attach: est7 attach returned 6 p4tcc7: <CPU Frequency Thermal Control> on cpu7 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xec000-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 ushub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 ushub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 ushub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 ushub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33 amr0: delete logical drives supported by controller amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 572160MB (1171783680 sectors) RAID 5 (optimal) GEOM_LABEL: Label for provider amrd0s1 is msdosfs/DellUtility. ushub0: 2 ports with 2 removable, self powered ushub1: 2 ports with 2 removable, self powered ushub2: 2 ports with 2 removable, self powered ushub3: 6 ports with 6 removable, self powered ugen3.2: <Dell> at usbus3 ushub4: <Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on usbus3 ushub4: 2 ports with 2 removable, self powered (probe21:ahd1:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe21:ahd1:0:6:0): CAM Status: SCSI Status Error (probe21:ahd1:0:6:0): SCSI Status: Check Condition (probe21:ahd1:0:6:0): UNIT ATTENTION asc:29,2 (probe21:ahd1:0:6:0): SCSI bus reset occurred (probe21:ahd1:0:6:0): Retrying Command (per Sense Data) (probe21:ahd1:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe21:ahd1:0:6:0): CAM Status: SCSI Status Error (probe21:ahd1:0:6:0): SCSI Status: Check Condition (probe21:ahd1:0:6:0): NOT READY asc:3a,0 (probe21:ahd1:0:6:0): Medium not present (probe21:ahd1:0:6:0): Unretryable error sa0 at ahd1 bus 0 target 6 lun 0 sa0: <COMPAQ SDLT320 5555> Removable Sequential Access SCSI-2 device sa0: 80.000MB/s transfers (40.000MHz, offset 62, 16bit) SMP: AP CPU #3 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #6 Launched! Trying to mount root from ufs:/dev/amrd0s2a This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 13 ZFS storage pool version 13 em0: link state changed to UP vlan0: link state changed to UP ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd