Bom dia, Lista. Tenho um laptop HP 2114br conforme descrição em http://h10010.www1.hp.com/wwpc/br/pt/ho/WF06b/321957-321957-3329744-64354-64354-4074361-4126200.html
Instalei o FreeBSD 8.0 e está funcionando quase tudo corretamente. Vejo pedir a ajuda da lista com um problema que tentei contornar, mas ainda não consegui que é o gerenciamento pelo ACPI (Gerenciamento de Energia). O arquivo loader.conf do laptop, configurei assim. # Kernel Options (Default do SO) kern.ipc.shmseg=1024 kern.ipc.shmmni=1024 # Load Wireless Support (Default do SO) if_ipw_load="YES" if_iwi_load="YES" if_wpi_load="YES" if_iwn_load="YES" legal.intel_ipw.license_ack=1 legal.intel_iwi.license_ack=1 legal.intel_wpi.license_ack=1 legal.intel_iwn.license_ack=1 #Broadcom BCM43xx (Foi adicionado por Mim) if_bwi_load="YES" # Load mmc card-reader support (Default do SO) mmc_load="YES" mmcsd_load="YES" sdhci_load="YES" # Load sata device support (Default do SO) ahci_load="YES" sdhci_load="YES" # Load support for scd (Default do SO) scd_load="YES" # Load sound-support (Default do SO) sound_load="YES" snd_uaudio_load="YES" # Load geom support geom_journal_load="YES" geom_uzip_load="YES" geom_mirror_load="YES" geom_eli_load="YES" # Load File-System Support (Default do SO) libiconv_load="YES" libmchain_load="YES" cd9660_iconv_load="YES" msdosfs_iconv_load="YES" ntfs_load="YES" ntfs_iconv_load="YES" udf_load="YES" udf_iconv_load="YES" zfs_load="YES" tmpfs_load="YES" sem_load="YES" vboxdrv_load="YES" # Carregar acpi para HP 2114br (Foi adicionado por mim) acpi_hp_load="YES" acpi_wmi_load="YES" acpi_video_load="YES" hw.ata.atapi_dma="0" beastie_disable="NO" autoboot_delay="10" #Frequencia de Processador (Foi adicionado por mim) cpuctl_load="YES" #CPU Throttling coretemp_load="YES" #Thermal Monitoring # Linux System linprocfs_load="YES" #Linux proc linsysfs_load="YES" #Linux sysfs #Bluetooh (Foi adicionado por mim) ubtbcmfw_load="YES #Firmware loader for Broadcom Bluetooth ng_ubt_load="YES" #Bluetooth driver kqemu_load="YES" aio_load="YES" Já verifiquei no systcl debug.acpi.suspend_bounce: 0 debug.acpi.reset_clock: 1 debug.acpi.do_powerstate: 1 debug.acpi.acpi_ca_version: 20090521 debug.acpi.ec.timeout: 750 debug.acpi.ec.polled: 0 debug.acpi.ec.burst: 0 debug.acpi.batt.batt_sleep_ms: 0 debug.acpi.resume_beep: 0 hw.acpi.supported_sleep_state: S1 S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 0 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.video.crt0.active: 0 hw.acpi.video.lcd0.active: 1 hw.acpi.video.lcd0.brightness: 100 hw.acpi.video.lcd0.fullpower: 100 hw.acpi.video.lcd0.economy: 50 hw.acpi.video.lcd0.levels: 100 50 0 10 20 30 40 50 60 70 80 90 100 hw.acpi.video.tv0.active: 0 hw.acpi.video.tv1.active: 0 hw.acpi.acline: 1 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 69.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 0 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 97.0C hw.acpi.thermal.tz0._HOT: 100.0C hw.acpi.thermal.tz0._CRT: 105.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz0._TC1: -1 hw.acpi.thermal.tz0._TC2: -1 hw.acpi.thermal.tz0._TSP: -1 hw.acpi.battery.life: -1 hw.acpi.battery.time: -1 hw.acpi.battery.state: 7 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 hw.acpi.cpu.cx_lowest: C1 machdep.acpi_timer_freq: 3579545 machdep.acpi_root: 1040416 machdep.idle_available: spin, mwait, mwait_hlt, amdc1e, hlt, acpi, dev.acpi.0.%desc: HPQOEM SLIC-MPC dev.acpi.0.%driver: acpi dev.acpi.0.%parent: nexus0 dev.acpi_sysresource.0.%desc: System Resource dev.acpi_sysresource.0.%driver: acpi_sysresource dev.acpi_sysresource.0.%location: handle=\_SB_.PCI0.LPC0.SYSR dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C02 _UID=0 dev.acpi_sysresource.0.%parent: acpi0 dev.acpi_sysresource.1.%desc: System Resource dev.acpi_sysresource.1.%driver: acpi_sysresource dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.LPC0.MEM_ dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C01 _UID=0 dev.acpi_sysresource.1.%parent: acpi0 dev.acpi_timer.0.%desc: 32-bit timer at 3.579545MHz dev.acpi_timer.0.%driver: acpi_timer dev.acpi_timer.0.%location: unknown dev.acpi_timer.0.%pnpinfo: unknown dev.acpi_timer.0.%parent: acpi0 dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x3 dev.acpi_ec.0.%driver: acpi_ec dev.acpi_ec.0.%location: handle=\_SB_.PCI0.LPC0.EC0_ dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=1 dev.acpi_ec.0.%parent: acpi0 dev.pci_link.0.%parent: acpi0 dev.pci_link.1.%parent: acpi0 dev.pci_link.2.%parent: acpi0 dev.pci_link.3.%parent: acpi0 dev.pci_link.4.%parent: acpi0 dev.pci_link.5.%parent: acpi0 dev.pci_link.6.%parent: acpi0 dev.pci_link.7.%parent: acpi0 dev.acpi_hpet.0.%desc: High Precision Event Timer dev.acpi_hpet.0.%driver: acpi_hpet dev.acpi_hpet.0.%location: unknown dev.acpi_hpet.0.%pnpinfo: unknown dev.acpi_hpet.0.%parent: acpi0 dev.acpi_button.0.%desc: Power Button dev.acpi_button.0.%driver: acpi_button dev.acpi_button.0.%location: handle=\_SB_.PWRB dev.acpi_button.0.%pnpinfo: _HID=PNP0C0C _UID=0 dev.acpi_button.0.%parent: acpi0 dev.acpi_button.1.%desc: Sleep Button dev.acpi_button.1.%driver: acpi_button dev.acpi_button.1.%location: handle=\_SB_.SLPB dev.acpi_button.1.%pnpinfo: _HID=PNP0C0E _UID=0 dev.acpi_button.1.%parent: acpi0 dev.pcib.0.%parent: acpi0 dev.acpi_video.0.%desc: ACPI video extension dev.acpi_video.0.%driver: acpi_video dev.acpi_video.0.%parent: vgapci0 dev.acpi_acad.0.%desc: AC Adapter dev.acpi_acad.0.%driver: acpi_acad dev.acpi_acad.0.%location: handle=\_SB_.ACAD dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0 dev.acpi_acad.0.%parent: acpi0 dev.acpi_lid.0.%desc: Control Method Lid Switch dev.acpi_lid.0.%driver: acpi_lid dev.acpi_lid.0.%location: handle=\_SB_.LID_ dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0 dev.acpi_lid.0.%parent: acpi0 dev.acpi_tz.0.%desc: Thermal Zone dev.acpi_tz.0.%driver: acpi_tz dev.acpi_tz.0.%location: handle=\_TZ_.TZ01 dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0 dev.acpi_tz.0.%parent: acpi0 dev.atdma.0.%parent: acpi0 dev.fpupnp.0.%parent: acpi0 dev.atrtc.0.%parent: acpi0 dev.attimer.0.%parent: acpi0 dev.atkbdc.0.%parent: acpi0 dev.psmcpnp.0.%parent: acpi0 dev.battery.0.%parent: acpi0 dev.cpu.0.%parent: acpi0 dev.cpu.1.%parent: acpi0 dev.acpi_perf.0.%driver: acpi_perf dev.acpi_perf.0.%parent: cpu0 dev.acpi_perf.1.%driver: acpi_perf dev.acpi_perf.1.%parent: cpu1 dev.acpi_throttle.0.%desc: ACPI CPU Throttling dev.acpi_throttle.0.%driver: acpi_throttle dev.acpi_throttle.0.%parent: cpu0 dev.acpi_throttle.0.freq_settings: 10000/-1 8750/-1 7500/-1 6250/-1 5000/-1 3750/-1 2500/-1 1250/-1 Na linha fala a temperatura atual hw.acpi.thermal.tz0.temperature: 69.0C Nas linhas abaixo os limites de temperatura (aquecimento) hw.acpi.thermal.tz0._PSV: 97.0C hw.acpi.thermal.tz0._HOT: 100.0C hw.acpi.thermal.tz0._CRT: 105.0C Nas linhas abaixo (S5 Ligar/Desligar, S1 Hibernar,Stand By, S3 Suspender) creio que está faltando alguma função hw.acpi.supported_sleep_state: S1 S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 O Som, rede cabeado, touchpad, dvd estão funcionado normalmente Já a webcam, entrada SD Card, wireless Broadcom (apenas de ter adicionado compilado/binário no loader.conf, não funciona e não reconhece), HDMI, escalador de frequencia do processador e controle remoto não funcionam. Não sei se devo postar, todo o sysctl aqui, pois nem todas as listas gostam disso, mas se for ajudar na análise, envio no proximo email. Já passei pelos procedimentos: http://www.freebsd.org/doc/en/books/handbook/acpi-debug.html http://www.freebsd.org/projects/acpi/ Se alguem puder me ajudar, eu agradeço. Obrigado ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
