Hello everyone, This is just a FYI about my first RSPRO deployed and my satisfaction with it :)
I'm running a slightly modified version of current (for the RTC support and basic multi-phy/switch support - still without vlan support). I've replaced my old P4 server and my (also old) wireless AP by this RSPRO with a ubiquiti SR-2 card. The only problem i had was with the WPA - hostapd - setup (never did it before, so i probably have screwed the setup). Here is the dmesg: http://pastebin.com/BGsAun6b The ifconfig: http://pastebin.com/Vf5pqaQs Disks and slices: http://pastebin.com/2jc0fJPh GPIO devices: http://pastebin.com/FvhQW5iL All installed ports: http://pastebin.com/yHcszFpR It's running fully static, booting a gziped kernel from onboard flash and with a full system on a 8GB SD card (i've another two 4GB memsticks, one is used for ports and the other for sources and obj). Thanks to everyone involved ! Cheers, Luiz ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
