Engraçado que desse modo, o ifconfig reclama dos mesmos erros relatados, porem todos os endereços são setados nas interfaces sem problema algum .. Não explorei muito o /etc/rc.d valeu pelas dicas..
Att. Em 3/4/2011 18:08, Ricardo escreveu: > Paulo > > Irei alterar deste forma e verificar se o erro ainda persiste, sobre > os mac estarem com xx fui em quem alterei no e-mail > > Att, > > Ricardo > > Em 3 de abril de 2011 01:21, Paulo Henrique BSD Brasil > <[email protected]> escreveu: >> Dica disponivel no rc.conf em /etc/default. >> >> No rc.conf descrime os aliases como asseguir. >> >> ipv4_addrs_$interface="192.168.1.1/24 10.1.1.1/8 172.16.0.1/16 >> 192.168.2.1/28 \ >> 192.168.3.1/27 192.168.3.1/25 10.0.1.1/30" >> >> Aqui foi apenas um exemplo, >> Em um ambiente real considerando como interface uma Intel Gigabit Desktop. >> ipv4_addrs_em0="192.168.1.16/30 192.168.1.21/30 192.168.1.25/29 >> 192.168.1.33/27 \ >> 192.168.1.65\26 192.168.1.193/27 192.168.1.225/30 192.168.1.229/28 >> 192.168.1.245/30 \ >> 192.168.1.249/29 192.168.1.1/29 192.168.1.9/30 192.168.1.13/30" >> >> Aqui exemplifiquei colocando toda a rede 192.168.1/24 segmentada. >> como pode ver é simples a configuração, tive um problema no passado, não >> lembro se é a mesma mensagem, >> onde resolvi declarando aliases dessas forma. >> >> Att. >> >> Em 3/4/2011 00:59, Joao Rocha Braga Filho escreveu: >>> 2011/4/2 Ricardo<[email protected]>: >>>> Paulo >>>> >>>> Segue abaixo o ifconfig, o que acebei descobrindo é que se comentar os >>>> alias da interface re0 ao reiniciar as interfaces o erro não acontece, >>>> mas se colocar novamente o erro volta. >>> Acho que está tentado colocar os endereços que já estão na interface. >>> >>> Como está reiniciando a interface? >>> >>> >>> João Rocha. >>> >>>> re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>>> 1500 >>>> >>>> options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> >>>> ether xx:xx:xx:xx:xx:xx >>>> inet 10.28.0.1 netmask 0xffffff00 broadcast 10.28.0.255 >>>> inet 10.28.0.120 netmask 0xffffffff broadcast 10.28.0.120 >>>> inet 10.28.0.215 netmask 0xffffffff broadcast 10.28.0.215 >>>> inet 10.28.0.121 netmask 0xffffffff broadcast 10.28.0.121 >>>> media: Ethernet autoselect (1000baseTX<full-duplex>) >>>> status: active >>>> re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>>> 1500 >>>> >>>> options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> >>>> ether xx:xx:xx:xx:xx:xx >>>> inet 10.10.2.1 netmask 0xffffff00 broadcast 10.10.2.255 >>>> media: Ethernet autoselect (1000baseTX<full-duplex>) >>>> status: active >>>> re2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>>> 1500 >>>> >>>> options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> >>>> ether xx:xx:xx:xx:xx:xx >>>> inet 10.28.11.1 netmask 0xffffff00 broadcast 10.28.11.255 >>>> media: Ethernet autoselect (1000baseTX<full-duplex>) >>>> status: active >>>> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>>> 1500 >>>> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> >>>> ether 00:30:48:2f:24:ba >>>> inet 200.xx.xx.130 netmask 0xffffffc0 broadcast 200.xx.xx.191 >>>> inet 200.xx.xx.132 netmask 0xffffffff broadcast 200.xx.xx.132 >>>> inet 200.xx.xx.141 netmask 0xffffffff broadcast 200.xx.xx.141 >>>> inet 200.xx.xx.133 netmask 0xffffffff broadcast 200.xx.xx.133 >>>> inet 200.xx.xx.136 netmask 0xffffffff broadcast 200.xx.xx.136 >>>> inet 200.xx.xx.142 netmask 0xffffffff broadcast 200.xx.xx.142 >>>> inet 200.xx.xx.143 netmask 0xffffffff broadcast 200.xx.xx.143 >>>> inet 200.xx.xx.144 netmask 0xffffffff broadcast 200.xx.xx.144 >>>> inet 200.xx.xx.145 netmask 0xffffffff broadcast 200.xx.xx.145 >>>> media: Ethernet autoselect (1000baseTX<full-duplex>) >>>> status: active >>>> em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>>> 1500 >>>> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> >>>> ether xx:xx:xx:xx:xx:xx >>>> inet 192.168.9.1 netmask 0xffffff00 broadcast 192.168.9.255 >>>> media: Ethernet autoselect (1000baseTX<full-duplex>) >>>> status: active >>>> >>>> >>>> Em 2 de abril de 2011 22:28, Paulo Henrique BSD Brasil >>>> <[email protected]> escreveu: >>>>> Ricardo, encaminha um ifconfig sem paramentros por favor !! >>>>> Att Paulo Henrique. >>>>> Em 2/4/2011 18:58, Ricardo escreveu: >>>>>> Boa Noite lista >>>>>> >>>>>> Estou com o seguinte problema ao reiniciar as placas do meu servidor >>>>>> Freebsd 7.1 (Firewall) apresenta a seguinte mensagem abaixo, procurei >>>>>> na net mas não encontrei algo sobre este erro, abaixo esta a >>>>>> configuração das interfaces no rc.conf >>>>>> >>>>>> Desde já agradeço >>>>>> >>>>>> Att, >>>>>> >>>>>> Ricardo >>>>>> >>>>>> Stopping network >>>>>> :ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address >>>>>> >>>>>> >>>>>> # Interfaces de Rede >>>>>> ifconfig_em0="inet 200.X.X.130 netmask 255.255.255.192" >>>>>> ifconfig_em0_alias0="inet 200.X.X.132 netmask 255.255.255.255" >>>>>> ifconfig_em0_alias1="inet 200.X.X.141 netmask 255.255.255.255" >>>>>> ifconfig_em0_alias2="inet 200.X.X.133 netmask 255.255.255.255" >>>>>> ifconfig_em0_alias3="inet 200.X.X.136 netmask 255.255.255.255" >>>>>> ifconfig_em0_alias4="inet 200.X.X.142 netmask 255.255.255.255" >>>>>> ifconfig_em0_alias5="inet 200.X.X.143 netmask 255.255.255.255" >>>>>> ifconfig_em0_alias6="inet 200.X.X.144 netmask 255.255.255.255" >>>>>> ifconfig_em0_alias7="inet 200.X.X.145 netmask 255.255.255.255" >>>>>> ifconfig_em1="inet 192.168.9.1 netmask 255.255.255.0" >>>>>> ifconfig_re0="inet 10.28.0.1 netmask 255.255.255.0" >>>>>> ifconfig_re0_alias0="inet 10.28.0.120 netmask 255.255.255.255" >>>>>> ifconfig_re0_alias1="inet 10.28.0.215 netmask 255.255.255.255" >>>>>> ifconfig_re0_alias2="inet 10.28.0.121 netmask 255.255.255.255" >>>>>> ifconfig_re1="inet 10.10.2.1 netmask 255.255.255.0" >>>>>> ifconfig_re2="inet 10.28.11.1 netmask 255.255.255.0" >>>>>> ------------------------- >>>>>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>>>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>>>> ------------------------- >>>>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>>>> >>>> ------------------------- >>>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>>> >>> >> ------------------------- >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >> > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
