Ola pessoal.
Se o assunto for off-topic me desculpe. Por nao se tratar
especificamente de FreeBSD. Mas axo já tentei de tudo. Estou tentando
fazer um redirecionamento de porta 80 para um proxy. Tenho um FreeBSD
com 3 interfaces.
1 re0 - wan
2 re1 - lan
3 alc0 - rede do proxy
Todas as interfaces são ips válidos não tenho nat nesse FreeBSD. O
endereço IP do proxy é 200.1.1.1(IP exemplo)
pass in quick on re1 route-to (alc0 200.1.1.1) proto tcp from any to any
port 80
pass in quick on re0 route-to (alc0 200.1.1.1) proto tcp from any port
80 to any
A ida e volta porem notei via tcpdump a volta nao é redirecionada (fiz
testes tentando acessar o site da Cisco: 23.216.160.170):
*
**captura na re1**- LAN*
14:02:31.529558 00:22:57:64:08:c5 > 00:00:5e:00:01:0c, ethertype IPv4
(0x0800), length 74: 200.2.2.2.59297 > 23.216.160.170.80: Flags [S], seq
2881852864, win 14600, options [mss 1460,sackOK,TS val 8945318 ecr
0,nop,wscale 7], length 0
14:02:31.529733 00:1a:3f:b1:51:05 > 00:22:57:64:08:c5, ethertype IPv4
(0x0800), length 74: 23.216.160.170.80 > 200.2.2.2.59297: Flags [S.],
seq 2813051021, ack 2881852865, win 28960, options [mss 1460,sackOK,TS
val 50571790 ecr 8945318,nop,wscale 7], length 0
14:02:31.533785 00:22:57:64:08:c5 > 00:00:5e:00:01:0c, ethertype IPv4
(0x0800), length 66: 200.2.2.2.59297 > 23.216.160.170.80: Flags [.], ack
1, win 115, options [nop,nop,TS val 8945322 ecr 50571790], length 0
*Three way handshake feito*
14:02:32.181023 00:1a:3f:b1:51:05 > 00:22:57:64:08:c5, ethertype IPv4
(0x0800), length 74: 23.216.160.170.80 > 200.2.2.2.24450: Flags [S.],
seq 1894693316, ack 299551138, win 14480, options [mss 1460,sackOK,TS
val 2263835919 ecr 50571844,nop,wscale 5], length 0
14:02:32.182614 00:22:57:64:08:c5 > 00:00:5e:00:01:0c, ethertype IPv4
(0x0800), length 60: 200.2.2.2.24450 > 23.216.160.170.80: Flags [R], seq
299551138, win 0, length 0
*
**Quando o site da cisco responde com SYN/ACK o cliente responde com um
Reset, ou seja não esta encaminhando a volta para o proxy minha regra de
volta não esta funcionando**. O que não entendo porque o cliente envia o
RST. Sera que ele considera uma nova conexão? e como nao tem three way
handshake feito ele reseta? E o processo ocorre algumas vezes enquanto o
cliente tenta*.
14:02:33.324284 00:1a:3f:b1:51:05 > 00:22:57:64:08:c5, ethertype IPv4
(0x0800), length 74: 23.216.160.170.80 > 200.2.2.2.24450: Flags [S.],
seq 1910248059, ack 299551138, win 14480, options [mss 1460,sackOK,TS
val 2263836914 ecr 50571944,nop,wscale 5], length 0
14:02:33.325800 00:22:57:64:08:c5 > 00:00:5e:00:01:0c, ethertype IPv4
(0x0800), length 60: 200.2.2.2.24450 > 23.216.160.170.80: Flags [R], seq
299551138, win 0, length 0
14:02:35.215487 00:1a:3f:b1:51:05 > 00:22:57:64:08:c5, ethertype IPv4
(0x0800), length 74: 23.216.160.170.80 > 200.2.2.2.24450: Flags [S.],
seq 28856710, ack 299551138, win 14480, options [mss 1460,sackOK,TS val
2227668864 ecr 50572144,nop,wscale 5], length 0
14:02:35.216626 00:22:57:64:08:c5 > 00:00:5e:00:01:0c, ethertype IPv4
(0x0800), length 60: 200.2.2.2.24450 > 23.216.160.170.80: Flags [R], seq
299551138, win 0, length 0
14:02:35.668511 00:22:57:64:08:c5 > 00:00:5e:00:01:0c, ethertype IPv4
(0x0800), length 66: 200.2.2.2.59297 > 23.216.160.170.80: Flags [F.],
seq 112, ack 1, win 115, options [nop,nop,TS val 8949456 ecr 50571790],
length 0
14:02:35.668802 00:1a:3f:b1:51:05 > 00:22:57:64:08:c5, ethertype IPv4
(0x0800), length 66: 23.216.160.170.80 > 200.2.2.2.59297: Flags [F.],
seq 1, ack 113, win 227, options [nop,nop,TS val 50572204 ecr 8949456],
length 0
14:02:35.709774 00:22:57:64:08:c5 > 00:00:5e:00:01:0c, ethertype IPv4
(0x0800), length 66: 200.2.2.2.59297 > 23.216.160.170.80: Flags [.], ack
2, win 115, options [nop,nop,TS val 8949498 ecr 50572204], length 0
*captura na alc0**- Interface onde o proxy esta conectado
*
14:02:31.529573 00:1a:3f:b1:51:05 > 40:f2:e9:db:6b:23, ethertype IPv4
(0x0800), length 74: 200.2.2.2.59297 > 23.216.160.170.80: Flags [S], seq
2881852864, win 14600, options [mss 1460,sackOK,TS val 8945318 ecr
0,nop,wscale 7], length 0
14:02:31.529726 40:f2:e9:db:6b:23 > 00:00:5e:00:01:0f, ethertype IPv4
(0x0800), length 74: 23.216.160.170.80 > 200.2.2.2.59297: Flags [S.],
seq 2813051021, ack 2881852865, win 28960, options [mss 1460,sackOK,TS
val 50571790 ecr 8945318,nop,wscale 7], length 0
14:02:31.533789 00:1a:3f:b1:51:05 > 40:f2:e9:db:6b:23, ethertype IPv4
(0x0800), length 66: 200.2.2.2.59297 > 23.216.160.170.80: Flags [.], ack
1, win 115, options [nop,nop,TS val 8945322 ecr 50571790], length 0
*Three way handshake feito**
**Aqui noto que o proxy tenta sair creio que ele abre 2 conexão uma para
o cliente outra para o server tipo como o modulo tproxy do linux/squid
faz.**
*
14:02:32.070663 40:f2:e9:db:6b:23 > 00:00:5e:00:01:0f, ethertype IPv4
(0x0800), length 74: 200.2.2.2.24450 > 23.216.160.170.80: Flags [S], seq
299551137, win 29200, options [mss 1460,sackOK,TS val 50571844 ecr
0,nop,wscale 7], length 0
14:02:33.066233 40:f2:e9:db:6b:23 > 00:00:5e:00:01:0f, ethertype IPv4
(0x0800), length 74: 200.2.2.2.24450 > 23.216.160.170.80: Flags [S], seq
299551137, win 29200, options [mss 1460,sackOK,TS val 50571944 ecr
0,nop,wscale 7], length 0
14:02:35.066212 40:f2:e9:db:6b:23 > 00:00:5e:00:01:0f, ethertype IPv4
(0x0800), length 74: 200.2.2.2.24450 > 23.216.160.170.80: Flags [S], seq
299551137, win 29200, options [mss 1460,sackOK,TS val 50572144 ecr
0,nop,wscale 7], length 0
*varios SYNs**e o FIN do cliente.
*
14:02:35.668516 00:1a:3f:b1:51:05 > 40:f2:e9:db:6b:23, ethertype IPv4
(0x0800), length 66: 200.2.2.2.59297 > 23.216.160.170.80: Flags [F.],
seq 112, ack 1, win 115, options [nop,nop,TS val 8949456 ecr 50571790],
length 0
14:02:35.668795 40:f2:e9:db:6b:23 > 00:00:5e:00:01:0f, ethertype IPv4
(0x0800), length 66: 23.216.160.170.80 > 200.2.2.2.59297: Flags [F.],
seq 1, ack 113, win 227, options [nop,nop,TS val 50572204 ecr 8949456],
length 0
14:02:35.709782 00:1a:3f:b1:51:05 > 40:f2:e9:db:6b:23, ethertype IPv4
(0x0800), length 66: 200.2.2.2.59297 > 23.216.160.170.80: Flags [.], ack
2, win 115, options [nop,nop,TS val 8949498 ecr 50572204], length 0
*Captura na re0**- WAN
*
14:02:32.070684 00:1a:3f:b1:58:0c > f8:72:ea:74:a1:b0, ethertype IPv4
(0x0800), length 74: 200.2.2.2.24450 > 23.216.160.170.80: Flags [S], seq
299551137, win 29200, options [mss 1460,sackOK,TS val 50571844 ecr
0,nop,wscale 7], length 0
14:02:32.181013 f8:72:ea:74:a1:b0 > 00:00:5e:00:01:01, ethertype IPv4
(0x0800), length 74: 23.216.160.170.80 > 200.2.2.2.24450: Flags [S.],
seq 1894693316, ack 299551138, win 14480, options [mss 1460,sackOK,TS
val 2263835919 ecr 50571844,nop,wscale 5], length 0
*
**O three way handshake ocorre pela metade. So tenho o SYN e SYN/ACK. Ai
o cliente manda o R(reset).**
*
14:02:32.182622 00:1a:3f:b1:58:0c > f8:72:ea:74:a1:b0, ethertype IPv4
(0x0800), length 54: 200.2.2.2.24450 > 23.216.160.170.80: Flags [R], seq
299551138, win 0, length 0
*
**E o processo ocorre novamente varias vezes
*14:02:33.066251 00:1a:3f:b1:58:0c > f8:72:ea:74:a1:b0, ethertype IPv4
(0x0800), length 74: 200.2.2.2.24450 > 23.216.160.170.80: Flags [S], seq
299551137, win 29200, options [mss 1460,sackOK,TS val 50571944 ecr
0,nop,wscale 7], length 0
14:02:33.324277 f8:72:ea:74:a1:b0 > 00:00:5e:00:01:01, ethertype IPv4
(0x0800), length 74: 23.216.160.170.80 > 200.2.2.2.24450: Flags [S.],
seq 1910248059, ack 299551138, win 14480, options [mss 1460,sackOK,TS
val 2263836914 ecr 50571944,nop,wscale 5], length 0
14:02:33.325807 00:1a:3f:b1:58:0c > f8:72:ea:74:a1:b0, ethertype IPv4
(0x0800), length 54: 200.2.2.2.24450 > 23.216.160.170.80: Flags [R], seq
299551138, win 0, length 0
14:02:35.066237 00:1a:3f:b1:58:0c > f8:72:ea:74:a1:b0, ethertype IPv4
(0x0800), length 74: 200.2.2.2.24450 > 23.216.160.170.80: Flags [S], seq
299551137, win 29200, options [mss 1460,sackOK,TS val 50572144 ecr
0,nop,wscale 7], length 0
14:02:35.215480 f8:72:ea:74:a1:b0 > 00:00:5e:00:01:01, ethertype IPv4
(0x0800), length 74: 23.216.160.170.80 > 200.2.2.2.24450: Flags [S.],
seq 28856710, ack 299551138, win 14480, options [mss 1460,sackOK,TS val
2227668864 ecr 50572144,nop,wscale 5], length 0
14:02:35.216632 00:1a:3f:b1:58:0c > f8:72:ea:74:a1:b0, ethertype IPv4
(0x0800), length 54: 200.2.2.2.24450 > 23.216.160.170.80: Flags [R], seq
299551138, win 0, length 0
Desculpe pelo e-mail longo. Mas ja tentei de tudo. Tentei ao invés de
route-to o reply-to sem sucesso tentei o divert-to tentei o rdr tambem
sem sucesso o problema do RDR ele manda direto com destino ao proxy na
verdade o destino e o site da cisco.
Se alguem já passou por isso. Algum palpite que possa me ajuda desde já
agradeço.
Att.
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
