Enviado do meu smartphone Sony Xperia™
---- Zhu Sha Zang escreveu ---- > On 04/08/2015 03:32 PM, Vitor Hugo wrote: > > This email was generated by the smartd daemon running on: > > > > host name: nas4free.local > > DNS domain: local > > NIS domain: [None] > > > > The following warning/error was logged by the smartd daemon: > > > > TEST EMAIL from smartd for device: /dev/ada0 > > > > Device info: > > SAMSUNG HD322HJ, S/N:S1RLJ50SB84327, WWN:5-0024e9-40015e921, FW:1AC01118, > > 320 GB > > > > For details see host's SYSLOG. smartctl 6.0 2012-10-10 r3643 [FreeBSD > > 9.1-RC3 amd64] (local build) > > Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org > > > > === START OF INFORMATION SECTION === > > Model Family: SAMSUNG SpinPoint F1 DT > > Device Model: SAMSUNG HD322HJ > > Serial Number: S1RLJ50SB84327 > > LU WWN Device Id: 5 0024e9 40015e921 > > Firmware Version: 1AC01118 > > User Capacity: 320,072,933,376 bytes [320 GB] > > Sector Size: 512 bytes logical/physical > > Device is: In smartctl database [for details use: -P show] > > ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b > > Local Time is: Tue Apr 7 19:31:23 2015 BRT > > SMART support is: Available - device has SMART capability. > > SMART support is: Enabled > > > > === START OF READ SMART DATA SECTION === > > SMART overall-health self-assessment test result: PASSED > > > > General SMART Values: > > Offline data collection status: (0x00) Offline data collection activity > > was never started. > > Auto Offline Data Collection: Disabled. > > Self-test execution status: ( 0) The previous self-test routine > > completed > > without error or no self-test has ever > > been run. > > Total time to complete Offline > > data collection: ( 4072) seconds. > > Offline data collection > > capabilities: (0x7b) SMART execute Offline immediate. > > Auto Offline data collection on/off > > support. > > Suspend Offline collection upon new > > command. > > Offline surface scan supported. > > Self-test supported. > > Conveyance Self-test supported. > > Selective Self-test supported. > > SMART capabilities: (0x0003) Saves SMART data before entering > > power-saving mode. > > Supports SMART auto save timer. > > Error logging capability: (0x01) Error logging supported. > > General Purpose Logging supported. > > Short self-test routine > > recommended polling time: ( 2) minutes. > > Extended self-test routine > > recommended polling time: ( 69) minutes. > > Conveyance self-test routine > > recommended polling time: ( 8) minutes. > > SCT capabilities: (0x003f) SCT Status supported. > > SCT Error Recovery Control supported. > > SCT Feature Control supported. > > SCT Data Table supported. > > > > SMART Attributes Data Structure revision number: 16 > > Vendor Specific SMART Attributes with Thresholds: > > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > > WHEN_FAILED RAW_VALUE > > 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always > > - 0 > > 3 Spin_Up_Time 0x0007 091 091 011 Pre-fail Always > > - 3550 > > 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always > > - 921 > > 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always > > - 0 > > 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always > > - 0 > > 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline > > - 0 > > 9 Power_On_Hours 0x0032 094 094 000 Old_age Always > > - 31493 > > 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always > > - 0 > > 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always > > - 0 > > 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always > > - 853 > > 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always > > - 0 > > 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always > > - 0 > > 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always > > - 0 > > 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always > > - 0 > > 188 Command_Timeout 0x0032 100 100 000 Old_age Always > > - 0 > > 190 Airflow_Temperature_Cel 0x0022 083 059 000 Old_age Always > > - 17 (Min/Max 17/17) > > 194 Temperature_Celsius 0x0022 081 054 000 Old_age Always > > - 19 (Min/Max 17/19) > > 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always > > - 128 > > 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always > > - 0 > > 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always > > - 0 > > 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline > > - 0 > > 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always > > - 0 > > 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always > > - 0 > > 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always > > - 0 > > > > SMART Error Log Version: 1 > > No Errors Logged > > > > SMART Self-test log structure revision number 1 > > No self-tests have been logged. [To run self-tests, use: smartctl -t] > > > > > > SMART Selective self-test log data structure revision number 1 > > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > > 1 0 0 Not_testing > > 2 0 0 Not_testing > > 3 0 0 Not_testing > > 4 0 0 Not_testing > > 5 0 0 Not_testing > > Selective self-test flags (0x0): > > After scanning selected spans, do NOT read-scan remainder of disk. > > If Selective self-test is pending on power-up, resume after 0 minute delay. > > > > ------------------------- > > Histórico: http://www.fug.com.br/historico/html/freebsd/ > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > Assim, na lata? Sem um jantar, conversinha amigável antes... > > Apresentações??? > > Anyway, RTFM Dude! > Zhu, acabou o romantismo pelo visto. É uma pena, mais isso me lembra vida de suport onde o usuário já chega colocando o nabo em perguntar se a terra está fofa!!! Meu caro, no smart seu HD está bom a midia é que aparece ter problemas, roda o software do fabricante do disco para ter uma informação mais confiavel. > > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
