Merhaba,
Size OpenBSd den bir systl.conf ornegi. FreeBSD sysctl.conf dosyasi
default bos geliyordu yanlis hatirlamiyorsam. Neyse, daha onceki
emaillerden hatirladigim kadari ile Enderunix'in FreeBSD kitabini
almistiniz galiba, eger hala almadiysaniz, alip okumanizi tavsiye ederim
:)
# $OpenBSD: sysctl.conf,v 1.30 2003/08/24 06:21:56 tedu Exp $
#
# This file contains a list of sysctl options the user wants set at
# boot time. See sysctl(3) and sysctl(8) for more information on
# the many available variables.
#
net.inet.ip.forwarding=1 # 1=Permit forwarding (routing) of packets
#net.inet6.ip6.forwarding=1 # 1=Permit forwarding (routing) of packets
#net.inet6.ip6.accept_rtadv=1 # 1=Permit IPv6 autoconf (forwarding must
be 0)
#net.inet.tcp.rfc1323=0 # 0=disable TCP RFC1323 extensions (for if
tcp is slow)
#net.inet.esp.enable=0 # 0=Disable the ESP IPsec protocol
#net.inet.ah.enable=0 # 0=Disable the AH IPsec protocol
#net.inet.ipcomp.enable=1 # 1=Enable the IPCOMP protocol
#net.inet.tcp.ecn=1 # 1=Enable the TCP ECN extension
#ddb.panic=0 # 0=Do not drop into ddb on a kernel panic
#ddb.console=1 # 1=Permit entry of ddb from the console
#fs.posix.setuid=0 # 0=Traditional BSD chown() semantics
#vm.swapencrypt.enable=1 # 1=Encrypt pages that go to swap
#vfs.nfs.iothreads=4 # number of nfsio kernel threads
#net.inet.ip.mtudisc=0 # 0=disable tcp mtu discovery
#kern.usercrypto=1 # 1=enable userland use of /dev/crypto
#kern.splassert=2 # 2=enable and verbose error messages.
#machdep.allowaperture=2 # See xf86(4)
#machdep.apmwarn=10 # battery % when apm status messages enabled
#machdep.apmhalt=0 # 1=powerdown hack, try if halt -p doesn't
work
#machdep.kbdreset=1 # permit console CTRL-ALT-DEL to do a nice
halt
#machdep.userldt=1 # allow userland programs to play with ldt,
# required by some ports
#kern.emul.aout=1 # enable running dynamic OpenBSD a.out bins
#kern.emul.bsdos=1 # enable running BSD/OS binaries
#kern.emul.freebsd=1 # enable running FreeBSD binaries
#kern.emul.ibcs2=1 # enable running iBCS2 binaries
#kern.emul.linux=1 # enable running Linux binaries
#kern.emul.svr4=1 # enable running SVR4 binaries
Iyi calismalar
Metin Pasaoglu
www.bilcag.net
Tel: (216) 4654950
Fax: (216) 4654865
Gsm: (532) 7772248
> dosyada hi� �rnek yok.ayr�ca hay�r demi�siniz.yani ba��na sysctl
> yaz�yoruz..
> evet!
>
>
> ----Original Message Follows----
> From: Huzeyfe ONAL <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: [freebsd] guvenlik...
> Date: Mon, 13 Sep 2004 11:17:03 +0300
>
> Hayir. zaten dosyayi actiginizda bircok ornek goreceksiniz.
> sysctl net.inet.tcp.blackhole=2 seklinde yazmaniz gerekiyor.
>
>>ba��na sysctl yazmam gerekir mi?
>>
>>
>>----Original Message Follows----
>>From: Huzeyfe ONAL <[EMAIL PROTECTED]>
>>Reply-To: [EMAIL PROTECTED]
>>To: [EMAIL PROTECTED]
>>Subject: Re: [freebsd] guvenlik...
>>Date: Mon, 13 Sep 2004 11:04:06 +0300
>>
>>merhaba,
>># isaretini komut satirini gostermek icin kullanmistim. sysctl.conf'a
>>girerken basindaki # isaretini kaldirmaniz gerekir.
>>
>>>Ben rc.conf a girmi�tim.siz diyorsunuz ki sysctl.conf a girin.tamam o da
>>>olur da aynen bu �ekilde mi girece�im? yani ba��na # ile birlikte mi?
>>>
>>>
>>>----Original Message Follows----
>>>From: Huzeyfe ONAL <[EMAIL PROTECTED]>
>>>Reply-To: [EMAIL PROTECTED]
>>>To: [EMAIL PROTECTED]
>>>Subject: Re: [freebsd] guvenlik...
>>>Date: Sun, 12 Sep 2004 20:49:19 +0300
>>>
>>>#sysctl net.inet.tcp.blackhole=2
>>>seklinde
>>>
>>>>
>>>>Parametre ile kast�n�z nedir?
>>>>
>>>>----Original Message Follows----
>>>>From: Huzeyfe ONAL <[EMAIL PROTECTED]>
>>>>Reply-To: [EMAIL PROTECTED]
>>>>To: [EMAIL PROTECTED]
>>>>Subject: Re: [freebsd] guvenlik...
>>>>Date: Sun, 12 Sep 2004 09:29:54 +0300
>>>>
>>>>Bu "komut" olarak girdiginiz seyleri sysctl komutuna parametre olarak
>>>>verin ya da /etc/sysct.conf dosyasina yazin/degistirin.
>>>>detayli bilgi icin asagidaki adrese danisabilirsiniz
>>>>
>>>>http://www.freebsd.org/cgi/man.cgi?query=sysctl
>>>>
>>>>Cihan �ulha wrote:
>>>>
>>>>>Kitab�n�zda yazd��� �zere rc.conf a alttaki sat�rlar� ekledim fakat
>>>>>cpanelin bu sisteminden s�rekli �u maili almaya ba�lad�m.dolay�s�yla
>>>>>sat�rlar� kald�r�yorum.
>>>>>
>>>>>
>>>>>----Original Message Follows----
>>>>>From: [EMAIL PROTECTED] (Cron Daemon)
>>>>>To: [EMAIL PROTECTED]
>>>>>Subject: Cron <[EMAIL PROTECTED]> /usr/libexec/save-entropy
>>>>>Date: Sat, 11 Sep 2004 12:00:00 +0300
>>>>>
>>>>>net.inet.tcp.blackhole=2: not found
>>>>>net.inet.udp.blackhole=1: not found
>>>>>
>>>>>
>>>>>
---------------------------------------------------------------------
Duydunuz mu! Turkiye'nin ilk FreeBSD kitabi cikti.
http://www.acikkod.com/freebsd.php
To unsubscribe, e-mail: [EMAIL PROTECTED]
Liste arsivi: http://lists.enderunix.org ve http://www.mail-archive.com/[EMAIL
PROTECTED]
