merhaba,
şu an freebsd yine aynı hatayı veriyor ve bu sefer ctrl+c ve restart işe yaramadı :( yine ssh ile makineye ulaşabiliyorum..
dmesg dediğimde aşağıdaki çıktıyı alıyorum...
mail# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <GBT AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.72-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
Hyperthreading: 2 logical CPUs
real memory = 1065287680 (1015 MB)
avail memory = 1033555968 (985 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 9 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 10 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNK0> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNK1> irq 6 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe21c4000-0xe21c43ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xa000-0xa0ff mem 0xe2005000-0xe20050ff irq 20 at device 0.0 on pci3
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:02:44:9b:1a:0b
fwohci0: <Texas Instruments TSB43AB23> mem 0xe2004000-0xe20047ff,0xe2000000-0xe2003fff irq 23 at device 7.0 on pci3
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:14:85:00:00:33:8f:f7
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:14:85:33:8f:f7
fwe0: Ethernet address: 02:14:85:33:8f:f7
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model 4D Mouse, device ID 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xcc000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2992715633 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B/1.00> at ata0-master PIO4
ad2: 76318MB <SAMSUNG HD080HJ WT100-33> at ata1-master SATA150
Trying to mount root from ufs:/dev/ad2s1a
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <GBT AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.72-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
Hyperthreading: 2 logical CPUs
real memory = 1065287680 (1015 MB)
avail memory = 1033555968 (985 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 9 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 10 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNK0> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNK1> irq 6 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe21c4000-0xe21c43ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xa000-0xa0ff mem 0xe2005000-0xe20050ff irq 20 at device 0.0 on pci3
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:02:44:9b:1a:0b
fwohci0: <Texas Instruments TSB43AB23> mem 0xe2004000-0xe20047ff,0xe2000000-0xe2003fff irq 23 at device 7.0 on pci3
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:14:85:00:00:33:8f:f7
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:14:85:33:8f:f7
fwe0: Ethernet address: 02:14:85:33:8f:f7
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model 4D Mouse, device ID 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xcc000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2992715633 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B/1.00> at ata0-master PIO4
ad2: 76318MB <SAMSUNG HD080HJ WT100-33> at ata1-master SATA150
Trying to mount root from ufs:/dev/ad2s1a
On 12/31/05, Ali Çelik <[EMAIL PROTECTED]> wrote:
tesekkür ederim
iyi geceler
On 12/31/05, Engin OZTURK < [EMAIL PROTECTED]> wrote:
> Bilmiyorum,
> bu ilk kurulumda oluyor hic de arastırmadım, sisteminizde sorun yok iciniz
> rahat yatın. bir kez ctrl c demek lazım sistem dünyaya merhaba derken ilk
> acılısta, acaba neden arastırmalı onu da.
> ama ssh la alakalı sorun oldugunu biliyorum, bir yıgın keyler vs yazıyor :)
> iyi geceler
>
>
> ----- Original Message -----
> From: "Ali Çelik" < [EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Saturday, December 31, 2005 1:35 AM
> Subject: Re: [FreeBSD] freebsd açılmıyor.
>
>
> > ya su an evdeyim ve restart ettim dediğiniz gibi ssh den bağlanıp
> > dmesg dediğimde bu sefer oyle bir hata mesajı vermedi herhalde açıldı
> > diye düşünüyorum.
> > peki neden böyle birşey olmuş olabilir ne yaptık ki düzeldi anlamadım
> > -tabi düzeldiyse- artık onu sabah ofise gidince görebileceğim :(-
> >
> > On 12/31/05, Engin OZTURK <[EMAIL PROTECTED]> wrote:
> > > peki
> > >
> > > ctrl C deneyin şimdi .. sshla ilgili bazı seyler yazacak ve yeniden
> restart
> > > ettiginizden acılacktır o alet
> > >
> > >
> > > ----- Original Message -----
> > > From: "Ali Çelik" <[EMAIL PROTECTED]>
> > > To: <[email protected]>
> > > Sent: Saturday, December 31, 2005 12:56 AM
> > > Subject: Re: [FreeBSD] freebsd açılmıyor.
> > >
> > >
> > > > oylece duruyor , enter yaptıkca alt satıra iniyor
> > > >
> > > >
> > > > On 12/31/05, Engin OZTURK <[EMAIL PROTECTED]> wrote:
> > > > > sistem acılırken bir yere gelip takılıyor, siz enter deyince ne
> oluyor ?
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Ali Çelik" <[EMAIL PROTECTED] >
> > > > > To: <[email protected]>
> > > > > Sent: Saturday, December 31, 2005 12:50 AM
> > > > > Subject: Re: [FreeBSD] freebsd açılmıyor.
> > > > >
> > > > >
> > > > > > dmesg dediğimde cıkan son satırlar :
> > > > > >
> > > > > > ad2: 76318MB <SAMSUNG HD080HJ WT100-33> at ata1-master SATA150
> > > > > > Trying to mount root from ufs:/dev/ad2s1a
> > > > > > WARNING: /tmp was not properly dismounted
> > > > > > WARNING: /usr was not properly dismounted
> > > > > > WARNING: /var was not properly dismounted
> > > > > >
> > > > > >
> > > > > > On 12/31/05, Engin Dumlu < [EMAIL PROTECTED]> wrote:
> > > > > > > dmesg yardımcı olabilir
> > > > > > >
> > > > > > >
> > > > > > > On 12/31/05, Ali Çelik < [EMAIL PROTECTED]> wrote:
> > > > > > > > ssh den bilgisayara ulaşabiliyorum. sistemin neden takıldığını
> > > hangi
> > > > > > > > uygulamayı yüklemeye çalışırken takıldığını gösteren birşey
> var mı
> > > > > > > > acaba
> > > > > > > >
> > > > > > > > On 12/30/05, Engin OZTURK < [EMAIL PROTECTED]> wrote:
> > > > > > > > > acılırken kalan konsolda entere basın gecer o ve ssh icin
> key
> > > > > yaratır
> > > > > > > > >
> > > > > > > > > ----- Original Message -----
> > > > > > > > > From: "Ali Çelik" < [EMAIL PROTECTED] >
> > > > > > > > > To: <[email protected]>
> > > > > > > > > Sent: Friday, December 30, 2005 9:42 PM
> > > > > > > > > Subject: [FreeBSD] freebsd açılmıyor.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > FreeBSD sistem açılırken kalıyor. ssh başladığı için başka
> > > > > > > > > > bilgisayardan, server a ssh ile bağlanabiliyorum.
> Açılırken
> > > nerede
> > > > > > > > > > takıldığını ve neden devam edemediğini nasıl bulabilirim.
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > >
> > > > ---------------------------------------------------------------------
> > > > > > > > > Cikmak icin, e-mail:
> > > > > > > [EMAIL PROTECTED]
> > > > > > > > > Liste arsivi: http://lists.enderunix.org
> > > > > > > > > Turkiye'nin ilk FreeBSD kitabi:
> > > > > > > http://www.acikakademi.com/freebsd.php
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Engin Dumlu
> > > > > >
> > > > >
> > > > >
> > > >
> > ---------------------------------------------------------------------
> > > > > Cikmak icin, e-mail: [EMAIL PROTECTED]
> > > > > Liste arsivi: http://lists.enderunix.org
> > > > > Turkiye'nin ilk FreeBSD kitabi:
> http://www.acikakademi.com/freebsd.php
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > Cikmak icin, e-mail: [EMAIL PROTECTED]
> > > Liste arsivi: http://lists.enderunix.org
> > > Turkiye'nin ilk FreeBSD kitabi: http://www.acikakademi.com/freebsd.php
> > >
> > >
> > >
> >
>
>
> ---------------------------------------------------------------------
> Cikmak icin, e-mail: [EMAIL PROTECTED]
> Liste arsivi: http://lists.enderunix.org
> Turkiye'nin ilk FreeBSD kitabi: http://www.acikakademi.com/freebsd.php
>
>
>
