tar -cvf /dev/sa0 /data ile olusturmus oldugum datalari
tar -tvf /dev/sa0 ile gormek istedigimde tar: Unrecognized archive format: Inappropriate file type or format gibi bir hata veriyor. Kaset ile ilgili bilgiler asagidaki gibidir. dmesg | grep -i sa0 | grep -v isa0 sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: <HP C7438A ZU5A> Removable Sequential Access SCSI-3 device sa0: 40.000MB/s transfers (sa0:umass-sim0:0:0:0): lost device (sa0:umass-sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: <HP C7438A ZU5A> Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): MEDIUM ERROR info:2800 asc:11,0 (sa0:umass-sim0:0:0:0): Unrecovered read error (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): failed to write terminating filemark(s) (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): lost device (sa0:dead_sim0:0:0:0): removing device entry sa0 at umass-sim0 bus 0 target 0 lun 0 sa0: <HP C7438A ZU5A> Removable Sequential Access SCSI-3 device sa0: 1.000MB/s transfers (sa0:umass-sim0:0:0:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted (sa0:umass-sim0:0:0:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (sa0:umass-sim0:0:0:0): SCSI Status: Check Condition (sa0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,2 (sa0:umass-sim0:0:0:0): Scsi bus reset occurred (sa0:umass-sim0:0:0:0): Retries Exhausted mt geteotmodel /dev/nsa0: the model is 2 filemarks at EOT mt status gate# mt status Mode Density Blocksize bpi Compression Current: 0x47 variable 0 DCLZ ---------available modes--------- 0: 0x47 variable 0 DCLZ 1: 0x47 variable 0 DCLZ 2: 0x47 variable 0 DCLZ 3: 0x47 variable 0 DCLZ --------------------------------- Current Driver State: at rest. --------------------------------- File Number: 0 Record Number: 0 Residual Count 0
