Evet o şekilde olmalı ancak maalesef olmuyor? Daha önce defalarca kullandım. Size sorun nedir?
# mount_ext2fs /dev/da0s1 /mnt/ [EMAIL PROTECTED] ~]# df -h Filesystem Size Used Avail Capacity Mounted on /dev/ad8s1a 179G 26G 138G 16% / devfs 1.0K 1.0K 0B 100% /dev devfs 1.0K 1.0K 0B 100% /var/named/dev /dev/da0s1 1.8T 114G 1.6T 7% /mnt [EMAIL PROTECTED] ~]# cd /mnt -su: cd: /mnt: Not a directory [EMAIL PROTECTED] ~]# umount /mnt [EMAIL PROTECTED] ~]# mount -t ext2 /dev/da0s1 /mnt/ mount: exec mount_ext2 not found in /sbin:/usr/sbin: No such file or directory [EMAIL PROTECTED] ~]# -----Original Message----- From: Cafer "Şimşek" [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 22, 2008 2:11 AM To: freebsd@lists.enderunix.org Subject: Re: [FreeBSD] freebsd ve ext3 Merhaba, Ext3 formatındaki bir diski rahatlıkla Ext2 olarak sisteme bağlayıp kullanabilirsiniz. Ext2 ile Ext3 arasındaki tek fark Journal desteği. Sevgiler. "Mesut GULNAZ" <[EMAIL PROTECTED]> writes: > kernel EXT3FS options unu kabul etmedi. bende EXT2FS desteği vererek > derledim ve yükledim. > açıldığında tekrar denedim ve aşağıdaki şekilde outputlar aldım. > > ^C > [EMAIL PROTECTED] ~]# mount -t ext2fs /dev/da0s1 /mnt/ > mount: /mnt: Bad file descriptor > [EMAIL PROTECTED] ~]# umount /mnt > [EMAIL PROTECTED] ~]# mount -t ext3 /dev/da0s1 /mnt/ > mount: exec mount_ext3 not found in /sbin:/usr/sbin: No such file or directory > [EMAIL PROTECTED] ~]# mount -t ext2fs /dev/da0s1 /mnt/ > [EMAIL PROTECTED] ~]# ls /mnt > ls: /mnt: Bad file descriptor > [EMAIL PROTECTED] ~]# mount > mount mount_fdescfs mount_msdosfs mount_nullfs > mount_reiserfs mount_umapfs > mount_cd9660 mount_linprocfs mount_nfs mount_nwfs > mount_smbfs mount_unionfs > mount_devfs mount_linsysfs mount_nfs4 mount_portalfs > mount_std mountd > mount_ext2fs mount_mfs mount_ntfs mount_procfs > mount_udf > [EMAIL PROTECTED] ~]# > > disk özellikleri ise şu şekilde. > > # dumpe2fs /dev/da0s1 > dumpe2fs 1.41.3 (12-Oct-2008) > Filesystem volume name: <none> > Last mounted on: <not available> > Filesystem UUID: 60441117-c430-4403-8525-d5f18c8de79b > Filesystem magic number: 0xEF53 > Filesystem revision #: 1 (dynamic) > Filesystem features: has_journal ext_attr resize_inode dir_index > filetype sparse_super large_file > Filesystem flags: signed_directory_hash > Default mount options: (none) > Filesystem state: not clean > Errors behavior: Continue > Filesystem OS type: Linux > Inode count: 122101760 > Block count: 488380008 > Reserved block count: 24419000 > Free blocks: 454525529 > Free inodes: 121967291 > First block: 0 > Block size: 4096 > Fragment size: 4096 > Reserved GDT blocks: 907 > Blocks per group: 32768 > Fragments per group: 32768 > Inodes per group: 8192 > Inode blocks per group: 512 > Filesystem created: Sat Oct 18 11:55:17 2008 > Last mount time: Mon Oct 20 17:14:26 2008 > Last write time: Tue Oct 21 23:58:47 2008 > Mount count: 7 > Maximum mount count: 30 > Last checked: Sat Oct 18 11:55:17 2008 > Check interval: 15552000 (6 months) > Next check after: Thu Apr 16 11:55:17 2009 > Reserved blocks uid: 0 (user root) > Reserved blocks gid: 0 (group wheel) > First inode: 11 > Inode size: 256 > Required extra isize: 28 > Desired extra isize: 28 > Journal inode: 8 > Default directory hash: half_md4 > Directory Hash Seed: 670911ca-e615-4b50-9e48-d73ca0e6aedf > Journal backup: inode blocks > Journal size: 128M > > öneriniz ya da tavsiyeniz nedir? > > 21 Ekim 2008 Salı 23:00 tarihinde Mehmet CELIK <[EMAIL PROTECTED]> yazdı: >> Selamlar.. >> Bildigim kadariyla FreeBSD ext2/3 dosya sistemlerini sorunsuz ve neredeyse >> tum fonksiyonlariyla birlikte mount edebilmektedir. Eger kullandiginiz >> dagitimda gelen KERNEL'de destek yok ise, >> >> options EXT2FS >> options EXT3FS >> >> parametrelerini kernel config dosyasina ekleyerek yeniden KERNEL derlemeniz >> gerekir. Daha sonra, >> >> shell # mount -t ext3fs /dev/adXxX /mnt >> >> seklinde mount edebilirsiniz. >> >> >> - >> Mehmet CELIK >> *BSD is Life... >> >> >>> Date: Tue, 21 Oct 2008 22:40:04 +0300 >>> From: [EMAIL PROTECTED] >>> To: freebsd@lists.enderunix.org >>> Subject: [FreeBSD] freebsd ve ext3 >>> >>> linux sunucularda ext3 olarak formatlanmış şekilde kullanılan bir >>> diski, içerisindeki datalara zarar vermeden read/write modda freebsd >>> sistemime nasıl mount edebilirim? >>> /usr/ports/sysutils/e2fsprogs kurdum ve denedim ancak bu uygulama >>> sanırım ext3 diskleri fsck ile kontrol edebilmek için kullanılıyor. >>> bu konuda ne yapılabilir??? >>> -- >>> İyi çalışmalar... >>> Mesut GÜLNAZ >> >> >> ________________________________ >> Want to read Hotmail messages in Outlook? The Wordsmiths show you how. Learn >> Now FreeBSD 6 kitabi: http://www.acikakademi.com/catalog/freebsd6 --------------------------------------------------------------------- Listeye soru sormadan once lutfen http://ipucu.enderunix.org sitesine bakiniz. Cikmak icin, e-mail: [EMAIL PROTECTED] Liste arsivi: http://news.gmane.org/gmane.org.user-groups.bsd.turkey FreeBSD 6 kitabi: http://www.acikakademi.com/catalog/freebsd6 --------------------------------------------------------------------- Listeye soru sormadan once lutfen http://ipucu.enderunix.org sitesine bakiniz. Cikmak icin, e-mail: [EMAIL PROTECTED] Liste arsivi: http://news.gmane.org/gmane.org.user-groups.bsd.turkey
