Вот dmesg, может кто-то увидит что-то необычное.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) CPU G6950 @ 2.80GHz (2980.10-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x20655 Family = 6 Model = 25
Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x82e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,POPCNT>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2082562048 (1986 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd0 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdfe02000-0xdfe023ff
irq 16 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci16: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x2000-0x201f mem
0xdf920000-0xdf93ffff,0xdf980000-0xdf9fffff,0xdf900000-0xdf903fff irq 16
at device 0.0 on pci16
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:22:64:8a:56:f4
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci26: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci28: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem
0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 18
at device 0.0 on pci28
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci30: <ACPI PCI bus> on pcib5
bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem
0xdfb00000-0xdfb0ffff irq 19 at device 0.0 on pci30
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: b4:99:ba:5c:a3:4f
bge0: [FILTER]
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci32: <ACPI PCI bus> on pcib6
em1: <Intel(R) PRO/1000 Network Connection 7.1.9> port 0x3000-0x301f mem
0xdfa80000-0xdfa9ffff,0xdfa00000-0xdfa7ffff,0xdfaa0000-0xdfaa3fff irq 16
at device 0.0 on pci32
em1: Using MSIX interrupts with 3 vectors
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: Ethernet address: 00:22:64:8a:50:cd
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdfe02400-0xdfe027ff
irq 23 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci48: <ACPI PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 5 Series/3400 Series PCH SATA300 controller> port
0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1800-0x181f
mem 0xdfe01000-0xdfe017ff irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.30 controller with 6 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq
0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xca000-0xcafff,0xdf000-0xdffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Tj(target) value 105 does not seem right.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Tj(target) value 105 does not seem right.
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled
ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding
enabled, default to accept, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 238475MB <GB0250EAFYK HPG2> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ad6: 238475MB <WDC WD2500AAKX-001CA0 15.01H15> at ata3-master UDMA100
SATA 3Gb/s
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
acd0: DVDROM <hp DVDROM DH40N/IS00> at ata5-master UDMA100 SATA 1.5Gb/s
SMP: AP CPU #1 Launched!
GEOM: mirror/gm0s1: geometry does not match label (16h,63s != 255h,63s).
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2>
on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2>
on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <ServerEngines> at usbus1
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3>
on usbus1
kbd1 at ukbd0
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on
usbus1
ums0: 8 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/mirror/gm0s1a
bge0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
07.04.2011 16:39, Alexander Yerenkow пишет:
ну хоть бы dmesg для приличия добавил :)
7 апреля 2011 г. 16:36 пользователь [email protected]
<mailto:[email protected]> <[email protected]
<mailto:[email protected]>> написал:
При запуске наблюдается такая картина: клавиатура становится
недоступна в момент появления окошка single user, default. Хотя до
этого момента и после него клавиатура работает нормально (проверял и
на USB и на PS/2). Иными словами, сервак никак не реагирует на
нажатие клавишь. Так же замечается такой глюк: после истечения
таймаута (меню выбора single mode, default), сервак как-будто
подвисает на секунд 10-15, потом продолжается нормальная загрузка.
Добавил в /boot/loader.conf такие строки:
hint.atkbd.0.disabled=1
hint.atkbdc.0.disabled=1
Это избавило от подвисания на 10-15 секунд, но клавиатура так же
недоступна.
Может кто сталкивался с таким?
Такое наблюдается и при загрузке с CD/HDD, Freebsd 8.2/8.0
--
Regards,
Alexander Yerenkow
