Hi!

On Tue, Mar 27, 2012 at 01:14:32PM +0300, Sayetsky Anton writes:
> 27 марта 2012 г. 13:09 пользователь Yuriy B. Borysov
> <[email protected]> написал:
>> С высокой долей вероятности, это не hdd. Как я уже писал раньше, они
>> отлично жили на 6-ке.
> Ну жили и сдохли, варинт невозможен?

При принудительном выключении DMA - все опять пашет как часы.

ad4: 76318MB <WDC WD800JB-00JJC0 05.01C05> at ata2-master PIO4
ad6: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata3-master PIO4


>> И смарт не показывает никаких ошибок.
> И всё же, покажите атрибуты.

smartctl version 5.38 [i386-portbld-freebsd6.4] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE family
Device Model:     WDC WD800JB-00JJC0
Serial Number:    WD-WCAM98806200
Firmware Version: 05.01C05
User Capacity:    80 025 280 000 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar 27 13:47:28 2012 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 (2460) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.


Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  35) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.


SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       
-       0
  3 Spin_Up_Time            0x0003   165   165   021    Pre-fail  Always       
-       2716
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       72
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       
-       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       
-       0
  9 Power_On_Hours          0x0032   029   029   000    Old_age   Always       
-       52106
 10 Spin_Retry_Count        0x0013   100   253   051    Pre-fail  Always       
-       0
 11 Calibration_Retry_Count 0x0012   100   253   051    Old_age   Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       70
194 Temperature_Celsius     0x0022   110   082   000    Old_age   Always       
-       33
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      
-       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.




-- 
WBR, Yuriy B. Borysov
YOKO-UANIC | YOKO-RIPE  

Ответить