On Tue, 02 Apr 2013 10:06:54 +0200
Alex Samorukov <[email protected]> wrote:

> Media_Wearout_Indicator чаще всего. Вы не привели модель ssd. Чаще
> всего на сайте производителя есть подробный pdf, в котором описано
> какой атрибут за что отвечает. Часть ssd также поддерживает
> самотестирование, которое полезно настроить в smartd. Короче,
> принципиальных отличий от мониторинга HDD нет - тот же
> smartd/smartctl, просто атрибуты и их значения другие.
> 

ну собственно вот, весь вывод smartctl
-a /dev/ada0: http://paste.org.ru/?dhqmrp 
именно Media_Wearout_Indicator=100 меня и смутило. 

> On 04/02/2013 08:37 AM, Sergey V. Dyatko wrote:
> > Hi,
> >
> > а как вообще принято оценивать жив ли ssd/сколько ему жить осталось?
> >
> > === START OF READ SMART DATA SECTION ===
> > SMART overall-health self-assessment test result: PASSED
> >
> > General SMART Values:
> > Offline data collection status:  (0x00) Offline data collection
> > activity was never started.
> >                                          Auto Offline Data
> > Collection: Disabled. Self-test execution status:      ( 249)
> > Self-test routine in progress... 90% of test remaining.
> > Total time to complete Offline
> > data collection:                (    0) seconds.
> > Offline data collection
> > capabilities:                    (0x1d) SMART execute Offline
> > immediate. No Auto Offline data collection
> > support. Abort Offline collection upon new
> >                                          command.
> >                                          Offline surface scan
> > supported. Self-test supported.
> >                                          No Conveyance Self-test
> > supported. No Selective Self-test supported.
> > SMART capabilities:            (0x0003) Saves SMART data before
> > entering power-saving mode.
> >                                          Supports SMART auto save
> > timer. Error logging capability:        (0x00) Error logging NOT
> > supported. General Purpose Logging
> > supported. Short self-test routine
> > recommended polling time:        (   0) minutes.
> > Extended self-test routine
> > recommended polling time:        (   0) minutes.
> >
> > SMART Attributes Data Structure revision number: 18
> > Vendor Specific SMART Attributes with Thresholds:
> > ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
> > UPDATED  WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate     0x0000
> > 006 000   000    Old_age   Offline      -       6 3 Spin_Up_Time
> > 0x0000   100   100   000    Old_age   Offline      -       0 4
> > Start_Stop_Count        0x0000   100   100   000    Old_age
> > Offline      -       0 5 Reallocated_Sector_Ct   0x0000   100   100
> > 000    Old_age   Offline      -       0 9 Power_On_Hours
> > 0x0000   100   100   000    Old_age   Offline      -       258 12
> > Power_Cycle_Count       0x0000   100   100   000    Old_age
> > Offline      -       47 232 Lifetime_Writes         0x0000   100
> > 100   000    Old_age   Offline      -       3002092020 233
> > Media_Wearout_Indicator 0x0000   100   000   000    Old_age
> > Offline      -       100
> >
> > SMART Error Log not supported
> >
> > SMART Self-test log structure revision number 1
> > Num  Test_Description    Status                  Remaining
> > LifeTime(hours)  LBA_of_first_error # 1  Short offline
> > Aborted by host               90%         0         -
> >
> > Selective Self-tests/Logging not supported
> >
> 



-- 
wbr, tiger

Ответить