I just installed the latest freedombox image on a 4GB SD card: dd bs=1M if=freedombox-unstable-free_2015-12-13_all-amd64.img of=/dev/sde conv=fdatasync dd: writing `/dev/sde': No space left on device 3797+0 records in 3796+0 records out 3980394496 bytes (4.0 GB) copied, 180.22 s, 22.1 MB/s
I put the SD card in the slot and it seems to have booted up fine. For now the freedombox is just connected to a standalone computer via the center ethernet port. I can access it at 10.42.0.1 after I configured the computer like this: ifconfig eth0 10.42.0.8 netmask 255.255.255.0 >From the browser, I got all the warnings about certificates as explained here: https://wiki.debian.org/FreedomBox/Manual and then I was told that the initial set up was done and I had 2 choices (buttons): network and applications. I selected network and it showed that only one interface was connected: FreedomBox LAN enp2s0. When I clicked on it, to see if I could change the IP address (I run static IP addresses in my local network - 192.168.x.x) I got this: 500 This is an internal error and not something you caused or can fix. Please report the error on the bug tracker so we can fix it. Is what I'm trying to do possible? I would like to change the IP address of the freedombox to 192.168.x.x so it fits into my internal network. For the "outside" or WAN ethernet port I will have a 4-port router to which are connected 2 Ubiquiti bullet 2 (HP and M2 HP) in station mode. This setup was working very nicely (without the freedombox) when there was wifi available, which is not the case now. So, as a backup I would like to use a tethered cell phone in a usb port on the apu1d4/freedombox. Since ths tethered phone acts like a modem (which works great although quite slowly, with ppp when connected directly to a computer) it would be really nice if I could just plug it in into the freedombox and have internet access when the 2 ubiquitis don't find an AP. As it is, since I can't even change the internal IP address, I can't integrate the freedombox into my network, so further testing and configuration are not possible at this time, it looks like. Is there anything else I can do? _______________________________________________ Freedombox-discuss mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/freedombox-discuss
