On Tue, 2025-04-01 at 17:35 +0200, Eric Auer via Freedos-devel wrote:
> 
> Hi!
> 
hii! :D
> > [DEBUG]  FORMAT 0.92a, selected drive B:
> ...
> > [DEBUG]  Current Disk Drive Parameter Table Values at 0070:0119:
> > [DEBUG]  [DDPT] Step Rate: 240 msec  Head Unload:    48 msec  DMA
> > Flag 
> > Bit:  0
> > [DEBUG]  [DDPT] Head Load:   4 msec  Post Rotate:  2035 msec Sector
> > Size: 512
> > [DEBUG]  [DDPT] SECTORS PER TRACK:  21  (Gap:  27  Data: 255 Format
> > Gap:  84)
> > [DEBUG]  [DDPT] Fill Char: 0xF6  Head Settle: 15 msec  Motor Start:
> > 1000 
> > msec
> > Formatting to 1494k (Cyl=83 Head=2 Sec=18)
> > OVERFORMAT: 1494k in 1200k drive. Good luck!
> > [DEBUG] Selecting int 13h ah=17h size class: 3
> > No gap length known for 18 sec/cyl. Good luck with BIOS value!
> > TWEAK: Sectors per cylinder in DDPT set to 18
> 
> Well, it did say "good luck". Formatting to 1494k in 1200k drives
> does not always work. The log later shows that 1200k did work :-)
> 
true! :D
> The next question would be: Did you explicitly ask FORMAT to use
> 1494k format? If not, have you used a floppy with that size right
> before starting FORMAT? If yes, has this worked with other disks?
> Is your drive a classic 5.25inch 1200k drive? Any specific details?
> 
> Regards, Eric
> 
yes! with /f:1494
yes it works perfectly with already formatted 1.2mb disks

it is a classic TEAC 1990 HD 5.25 FDD
it is exactly this drive https://www.ebay.com/itm/296978062306

let me test it on more drives
> 
> 
> Here is the part which shows that 1200k format did work for you:
> 
> 
> > [DEBUG]  FORMAT 0.92a, selected drive B:
> ...
> > Using drive default: 1200k (Cyl=80 Head=2 Sec=15)
> > [DEBUG] Selecting int 13h ah=17h size class: 3
> ...
> > [DEBUG]  Formatting: Cylinder:  0  Head:  0  Sectors: 15
> ...
> > [DEBUG]  Formatting: Cylinder: 79  Head:  1  Sectors: 15
> >   98% 100%
> > [DEBUG]  File System Creation
> > [DEBUG]  Boot Sector -> 0
> > [DEBUG]  FAT Sectors: 1 to 14 ->
> >    0%   7%  14%  21%  28%  35%  42%  50%  57%  64%  71%  78%  85%
> > 92% 100%
> > [DEBUG]  FAT1 Start -> 1
> > [DEBUG]  FAT2 Start -> 8
> > [DEBUG]  Root Directory Sectors: 15 to 28 ... done.
> > [DEBUG]  Root, Label, Timestamp -> 15
> > [DEBUG]  File System Created
> > 
> > Format complete.
> > [DEBUG]  DOS 7+, UNLOCKing drive (by one level)
> > [DEBUG]  DOS 7+, UNLOCKing drive (by one level)
> > 
> >       1,228,800  bytes total disk space (disk size)
> >       1,213,952  bytes available on disk (free clusters)
> > 
> >             512  bytes in each allocation unit.
> >           2,371 allocation units on disk.
> > 
> >   Volume Serial Number is 1C45-1A01
> 
> 
> 
> 
> 
> _______________________________________________
> Freedos-devel mailing list
> Freedos-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freedos-devel

-- 
founder of yellow rose group 💛️


_______________________________________________
Freedos-devel mailing list
Freedos-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freedos-devel

Reply via email to