--- Begin Message ---
diff -ruNp 0old/build.bat 0new/build.bat
--- 0old/build.bat 2004-03-27 01:42:32.000000000 +0000
+++ 0new/build.bat 2004-04-03 10:16:14.000000000 +0000
@@ -3,18 +3,22 @@
:- batch file to build everything
:- $Id$
+:-----------------------------------------------------------------------
:- Syntax: BUILD [-r] [fat32|fat16] [msc|wc|tc|tcpp] [86|186|386]
:- option case is significant !!
+:-----------------------------------------------------------------------
-if "%1" == "-r" call clobber
-if "%1" == "-r" shift
+set XERROR=1
+if "%XERROR%" == "" goto noenv
-set XERROR=
+if "%1" == "-r" call clobber.bat
+if "%1" == "-r" shift
if not exist config.bat echo You must copy CONFIG.B to CONFIG.BAT and edit it to
reflect your setup!
if not exist config.bat goto abort
-call config
+call config.bat
+if "%LAST%" == "" goto noenv
:-----------------------------------------------------------------------
:- following is command line handling
@@ -41,7 +45,8 @@ if not "%1" == "" goto loop_commandline
if "%COMPILER%" == "" echo you MUST define a COMPILER variable in CONFIG.BAT
if "%COMPILER%" == "" goto abort
-call default
+call defaults.bat
+if "%LAST%" == "" goto noenv
:-----------------------------------------------------------------------
:- finally - we are going to compile
@@ -51,50 +56,51 @@ echo.
echo Process UTILS ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo.
cd utils
-%MAKE% production
+call %MAKE% production
if errorlevel 1 goto abort-cd
echo.
echo Process LIB ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo.
cd ..\lib
-%MAKE%
+call %MAKE%
if errorlevel 1 goto abort-cd
echo.
echo Process DRIVERS ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo.
cd ..\drivers
-%MAKE% production
+call %MAKE% production
if errorlevel 1 goto abort-cd
echo.
echo Process BOOT +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo.
cd ..\boot
-%MAKE% production
+call %MAKE% production
if errorlevel 1 goto abort-cd
echo.
echo Process SYS ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo.
cd ..\sys
-%MAKE% production
+call %MAKE% production
if errorlevel 1 goto abort-cd
echo.
echo Process KERNEL +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo.
cd ..\kernel
-%MAKE% production
+call %MAKE% production
if errorlevel 1 goto abort-cd
cd ..
-:- if you like, put some finalizing commands (like copy to floppy)
-:- into build2.bat
+:- if you like, put finalizing commands (like copy to floppy) into build2.bat
+
+set XERROR=
-if exist build2.bat call build2
+if exist build2.bat call build2.bat
echo.
echo Processing is done.
@@ -104,9 +110,9 @@ goto end
:abort-cd
cd ..
+:noenv
:abort
echo Compilation was aborted!
-set XERROR=1
:end
-default clearset
+defaults.bat clearset
diff -ruNp 0old/buildall.bat 0new/buildall.bat
--- 0old/buildall.bat 2004-03-27 01:42:32.000000000 +0000
+++ 0new/buildall.bat 2004-03-31 13:25:20.000000000 +0000
@@ -3,62 +3,54 @@
:- $Id$
:----------------------------------------------------------
-:- batch file to build _many_ KERNELS, hope build works
+:- batch file to build _many_ KERNELS, hope build works.
:- takes 3 minutes on my(TE) Win2K/P700. your milage may vary :-)
:----------------------------------------------------------
if "%1" == "$SUMMARY" goto summary
-set onerror=if not "%%XERROR%%" == "" goto daswarwohlnix
+call config.bat
+if "%LAST%" == "" goto end
:***** MSCL kernels
-call config.bat
+if "%MSCL8_BASE%" == "" goto no_ms
+ call build.bat -r msc 386 fat16
+if "%XERROR%" == "" call build.bat -r msc 186 fat16
+if "%XERROR%" == "" call build.bat -r msc 86 fat16
+if "%XERROR%" == "" call build.bat -r msc 386 fat32
+if "%XERROR%" == "" call build.bat -r msc 186 fat32
+if "%XERROR%" == "" call build.bat -r msc 86 fat32
-if "%MS_BASE%" == "" goto no_ms
-call build -r msc 386 fat16
-%ONERROR%
-call build -r msc 186 fat16
-%ONERROR%
-call build -r msc 86 fat16
-%ONERROR%
-call build -r msc 386 fat32
-%ONERROR%
-call build -r msc 186 fat32
-%ONERROR%
-call build -r msc 86 fat32
-%ONERROR%
+if not "%XERROR%" == "" goto daswarwohlnix
:no_ms
:***** TC 2.01 kernels
if "%TC2_BASE%" == "" goto no_tc
-call build -r tc 186 fat16
-%ONERROR%
-call build -r tc 86 fat16
-%ONERROR%
-call build -r tc 186 fat32
-%ONERROR%
-call build -r tc 86 fat32
-%ONERROR%
+ call build.bat -r tc 186 fat16
+if "%XERROR%" == "" call build.bat -r tc 86 fat16
+if "%XERROR%" == "" call build.bat -r tc 186 fat32
+if "%XERROR%" == "" call build.bat -r tc 86 fat32
+
+if not "%XERROR%" == "" goto daswarwohlnix
:no_tc
:***** (Open) Watcom kernels
if "%WATCOM%" == "" goto no_wc
-call build -r wc 386 fat32
-%ONERROR%
-call build -r wc 386 fat16
-%ONERROR%
-call build -r wc 86 fat32
-%ONERROR%
-call build -r wc 86 fat16
-%ONERROR%
+ call build.bat -r wc 386 fat32
+if "%XERROR%" == "" call build.bat -r wc 386 fat16
+if "%XERROR%" == "" call build.bat -r wc 86 fat32
+if "%XERROR%" == "" call build.bat -r wc 86 fat16
+
+if not "%XERROR%" == "" goto daswarwohlnix
:no_wc
:***** now rebuild the default kernel
-call build -r
+call build.bat -r
+if not "%XERROR%" == "" goto daswarwohlnix
:**************************************************************
:* now we build a summary of all kernels HMA size + total size
@@ -79,9 +71,9 @@ if exist %TempSumfile% del %TempSumfile%
>ktemp.bat
for %%i in (bin\k*.map) do echo call %0 $SUMMARY %%i >>ktemp.bat
sort <ktemp.bat >ktemps.bat
-call ktemps
-del ktemp.bat
-del ktemps.bat
+call ktemps.bat
+del ktemp.bat>nul
+del ktemps.bat>nul
echo >>%Sumfile% Summary of all kernels build
echo.|date >>%Sumfile%
@@ -103,6 +95,5 @@ goto end
:daswarwohlnix
echo Sorry, something didn't work as expected :-(
-set ONERROR=
:end
diff -ruNp 0old/clean.bat 0new/clean.bat
--- 0old/clean.bat 2004-03-27 01:42:32.000000000 +0000
+++ 0new/clean.bat 2004-04-03 10:15:56.000000000 +0000
@@ -1,37 +1,45 @@
@echo off
-:- batch file to clean everything
+:- batch file to clean and clobber everything
:- $Id$
+if "%1" == "" %0 clean
+goto %1
+goto end
+
+:clean
+:clobber
if not exist config.bat echo You must copy CONFIG.B to CONFIG.BAT and edit it to
reflect your setup!
if not exist config.bat goto end
-call config
-call default
+call config.bat
+if not "%LAST%" == "" call defaults.bat
+if "%LAST%" == "" goto end
cd utils
-%MAKE% clean
+call %MAKE% %1
cd ..\lib
-%MAKE% clean
+call %MAKE% %1
cd ..\drivers
-%MAKE% clean
+call %MAKE% %1
cd ..\boot
-%MAKE% clean
+call %MAKE% %1
cd ..\sys
-%MAKE% clean
+call %MAKE% %1
cd ..\kernel
-%MAKE% clean
+call %MAKE% %1
cd ..\hdr
if exist *.bak del *.bak
cd ..
if exist *.bak del *.bak
+if "%1"=="clobber" if exist status.me del status.me
:end
-default clearset
+defaults.bat clearset
diff -ruNp 0old/clobber.bat 0new/clobber.bat
--- 0old/clobber.bat 2004-03-27 01:42:32.000000000 +0000
+++ 0new/clobber.bat 2004-03-27 05:43:02.000000000 +0000
@@ -1,38 +1 @@
[EMAIL PROTECTED] off
-
-:- batch file to clobber everything
-:- $Id$
-
-if not exist config.bat echo You must copy CONFIG.B to CONFIG.BAT and edit it to
reflect your setup!
-if not exist config.bat goto end
-
-call config
-call default
-
-cd utils
-%MAKE% clobber
-
-cd ..\lib
-%MAKE% clobber
-
-cd ..\drivers
-%MAKE% clobber
-
-cd ..\boot
-%MAKE% clobber
-
-cd ..\sys
-%MAKE% clobber
-
-cd ..\kernel
-%MAKE% clobber
-
-cd ..\hdr
-if exist *.bak del *.bak
-
-cd ..
-if exist *.bak del *.bak
-if exist status.me del status.me
-
-:end
-default clearset
[EMAIL PROTECTED] clobber
\ No newline at end of file
diff -ruNp 0old/config.b 0new/config.b
--- 0old/config.b 2003-09-15 11:50:58.000000000 +0000
+++ 0new/config.b 2004-04-03 09:58:44.000000000 +0000
@@ -1,119 +1,127 @@
-:-
[EMAIL PROTECTED] off
+
:- batch file that is included in all other batch files for configuration
-:-
+:- $Id: config.b,v 1.11 2003/07/19 18:12:26 bartoldeman Exp $
-:-****************************************************************
-:- NOTICE! You must edit and rename this file to CONFIG.BAT! *
-:-****************************************************************
+:-----------------------------------------------------------------------
+:- NOTICE! You must edit and rename this file to CONFIG.BAT!
+:-----------------------------------------------------------------------
-:-*********************************************************************
-:- determine your compiler settings
-:-
-:- you have to
-:- search for XNASM - and set the path for NASM
-:- search for COMPILER - and set your compiler
-:- search for ??_BASE - and set the path to your compiler
+:- determine compiler(s) settings
:-
-:-*********************************************************************
+:- you REQUIRED to
+:- search for NASM - and set the path to NASM
+:- search for COMPILER - and set the default compiler type
+:- search for ??_BASE - and set the path to compiler(s)
+
+set LAST=
+
+:-----------------------------------------------------------------------
+:- define where to find NASM - remember - it should not be protected
+:- mode DJGPP version if you're using Windows NT/2k/XP to compile.
+:- also: DJGPP-nasm crashes when using protected mode Borland's make
-:-**********************************************************************
-:-- define where to find NASM - remember - it should not be protected
-:- mode DJGPP version if you're using Windows NT/2k/XP to compile
-:- also: DJGPP-nasm crashes when using protected mode Borland's make
-:-**********************************************************************
-
-set XNASM=c:\bin\nasm16
-
-:**********************************************************************
-:- define your COMPILER type here, pick one of them
-:**********************************************************************
+set NASM=c:\bin\nasm16
+
+:-----------------------------------------------------------------------
+:- define COMPILER type here, pick one of them
:- Turbo C 2.01
set COMPILER=TC2
:- Turbo C++ 1.01
-:- set COMPILER=TURBOCPP
+::set COMPILER=TURBOCPP
:- Turbo C 3.0
-:- set COMPILER=TC3
+::set COMPILER=TC3
:- Borland C
-:- set COMPILER=BC5
+::set COMPILER=BC5
:- Microsoft C
-:- set COMPILER=MSCL8
+::set COMPILER=MSCL8
:- Watcom C
-:- set COMPILER=WATCOM
+::set COMPILER=WATCOM
+
+:-----------------------------------------------------------------------
+:- where is the BASE dir of compiler(s).
+:- should be defined for each installed and used compiler.
-:-**********************************************************************
-:-- where is the BASE dir of your compiler(s) ??
-:-**********************************************************************
-
set TC2_BASE=c:\tc201
-:- set TP1_BASE=c:\tcpp
-:- set TC3_BASE=c:\tc3
-:- set BC5_BASE=c:\bc5
-:- set MS_BASE=c:\msvc
-
-:- if WATCOM maybe you need to set your WATCOM environment variables
-:- and path
-:- if not \%WATCOM% == \ goto watcom_defined
-:- set WATCOM=c:\watcom
-:- set PATH=%PATH%;%WATCOM%\binw
+::set TP1_BASE=c:\tcpp
+::set TC3_BASE=c:\tc3
+::set BC5_BASE=c:\bc5
+::set MSCL8_BASE=c:\msvc
+
+:- For Watcom you may need to set WATCOM environment variable and PATH
+::if not "%WATCOM%" == "" goto watcom_defined
+::set WATCOM=c:\watcom
+::set OLDPATH=%PATH%
+::set PATH=%PATH%;%WATCOM%\binw
:watcom_defined
-:-**********************************************************************
-:- where is UPX and which options to use?
-:-**********************************************************************
+:-----------------------------------------------------------------------
+:- where is UPX and which options to use
+:- (comment this out if you don't want to use it)
+
set XUPX=upx --8086 --best
-:- or use set XUPX=
-:- if you don't want to use it
-:-**********************************************************************
-:- (optionally) which linker to use:
-:- (otherwise will be determined automatically)
-:-
-:- WARNING TLINK needs to be in your PATH!
-:-**********************************************************************
+:-----------------------------------------------------------------------
+:- define which linker to use OR it will be determined AUTOMATICALLY.
+:- WARNING TLINK needs to be in PATH!
:- Turbo Link
-:- set XLINK=tlink /m/c/s/l
+::set LINK=tlink/m/c/s/l
:- Microsoft Link
-:- set XLINK=d:\qb\link /ma
-:- set XLINK=%MS_BASE%\bin\link /ONERROR:NOEXE /ma /nologo
+::set LINK=d:\qb\link/ma
+::set LINK=link/ONERROR:NOEXE /ma /nologo
:- WATCOM Link (wlinker is a batch file calling ms2wlink and wlink)
-:- set XLINK=..\utils\wlinker /ma /nologo
+::set LINK=..\utils\wlinker/ma/nologo
:- set path for Turbo Link - use OLDPATH to restore normal path
-:- set OLDPATH=%PATH%
-:- set PATH=%PATH%;%TC2_BASE%
+::set OLDPATH=%PATH%
+::set PATH=%PATH%;%TC2_BASE%
+
+:-----------------------------------------------------------------------
+:- define which librarian to use OR it will be determined AUTOMATICALLY.
-:**********************************************************************
-:* optionally define your MAKE type here, if not then
-:* it will be automatically determined, pick one of them
-:* use MS nmake if you want to compile with MSCL
-:**********************************************************************
+:- Turbo Lib
+::set LIBPLUS=+
+::set LIBTERM=
+::set LIBUTIL=tlib
+:- Microsoft Lib
+::set LIBPLUS=+
+::set LIBTERM=;
+::set LIBUTIL=lib/nologo
+:- WATCOM Lib
+::set LIBPLUS=
+::set LIBTERM=
+::set LIBUTIL=wlib -q
+
+:-----------------------------------------------------------------------
+:- define which MAKE to use OR it will be determined AUTOMATICALLY.
:- Borland MAKE
-:- set MAKE=%TC2_BASE%\make
+::set MAKE=make
+::set MAKE=maker -S
:- Watcom MAKE in MS mode
-:- set MAKE=%WATCOM%\binw\wmake /ms
+::set MAKE=wmake/ms
:- Microsoft MAKE
-:- set MAKE=%MS_BASE%\bin\nmake /nologo
+::set MAKE=nmake/nologo
-:**********************************************************************
-:* select your default target: required CPU and what FAT system to support
-:**********************************************************************
-
-set XCPU=86
-:- set XCPU=186
-:- set XCPU=386
+:-----------------------------------------------------------------------
+:- select default target: CPU type (default is 86) and
+:- what FAT system (default is 32) to support
+
+::set XCPU=86
+::set XCPU=186
+::set XCPU=386
-set XFAT=16
-:- set XFAT=32
+::set XFAT=16
+::set XFAT=32
:- Give extra compiler DEFINE flags here
:- such as -DDEBUG : extra DEBUG output
:- -DDOSEMU : printf output goes to dosemu log
-:- set ALLCFLAGS=-DDEBUG
+::set ALLCFLAGS=-DDEBUG
+:-----------------------------------------------------------------------
-:-
-:- $Id: config.b,v 1.11 2003/07/19 18:12:26 bartoldeman Exp $
-:-
+set LAST=1
+if not "%LAST%" == "1" defaults.bat clearset
diff -ruNp 0old/default.bat 0new/default.bat
--- 0old/default.bat 2004-03-27 05:20:12.000000000 +0000
+++ 0new/default.bat 1970-01-01 00:00:00.000000000 +0000
@@ -1,66 +0,0 @@
[EMAIL PROTECTED] off
-
-:- $Id: default.bat,v 1.1 2004/03/27 01:42:33 bartoldeman Exp $
-
-if "%1" == "clearset" goto clearset
-
-:-----------------------------------------------------------------------
-
-if not "%MAKE%" == "" goto skip_make
-
-if "%COMPILER%" == "TC2" set MAKE=%TC2_BASE%\make
-if "%COMPILER%" == "TURBOCPP" set MAKE=%TP1_BASE%\bin\make
-if "%COMPILER%" == "TC3" set MAKE=%TC3_BASE%\bin\make
-if "%COMPILER%" == "BC5" set MAKE=%BC5_BASE%\bin\make
-if "%COMPILER%" == "WATCOM" set MAKE=wmake/ms /h
-if "%COMPILER%" == "MSCL8" set MAKE=%MS_BASE%\bin\nmake/nologo
-
-echo Make is %MAKE%.
-
-:skip_make
-
-:-----------------------------------------------------------------------
-
-if not "%XLINK%" == "" goto skip_xlink
-
-if "%COMPILER%" == "TC2" set XLINK=%TC2_BASE%\tlink/m/c
-if "%COMPILER%" == "TURBOCPP" set XLINK=%TP1_BASE%\bin\tlink/m/c
-if "%COMPILER%" == "TC3" set XLINK=%TC3_BASE%\bin\tlink/m/c
-if "%COMPILER%" == "BC5" set XLINK=%BC5_BASE%\bin\tlink/m/c
-if "%COMPILER%" == "WATCOM" set XLINK=..\utils\wlinker/ma/nologo
-if "%COMPILER%" == "MSCL8" set XLINK=%MS_BASE%\bin\link/ONERROR:NOEXE /ma /nologo
-
-echo Linker is %XLINK%.
-
-:skip_xlink
-
-:-----------------------------------------------------------------------
-
-if not "%XUPX%" == "" set UPXOPT=-U
-if "%XUPX%" == "" set UPXOPT=
-if "%XUPX%" == "" set [EMAIL PROTECTED]
-
-goto end
-
-:-----------------------------------------------------------------------
-
-:clearset
-
-if not "%OLDPATH%" == "" set PATH=%OLDPATH%
-if not "%OLDPATH%" == "" set OLDPATH=
-
-set MAKE=
-set COMPILER=
-set XCPU=
-set XFAT=
-set XLINK=
-set TC2_BASE=
-set TP1_BASE=
-set TC3_BASE=
-set BC5_BASE=
-set MS_BASE=
-set XNASM=
-set XUPX=
-set UPXOPT=
-
-:end
diff -ruNp 0old/defaults.bat 0new/defaults.bat
--- 0old/defaults.bat 1970-01-01 00:00:00.000000000 +0000
+++ 0new/defaults.bat 2004-04-03 09:58:14.000000000 +0000
@@ -0,0 +1,90 @@
[EMAIL PROTECTED] off
+
+:- $Id: defaults.bat,v 1.1 2004/03/27 01:42:33 bartoldeman Exp $
+
+set LAST=
+if "%1" == "clearset" goto clearset
+
+:-----------------------------------------------------------------------
+
+if "%COMPILER%" == "TC2" set BASE=%TC2_BASE%
+if "%COMPILER%" == "TURBOCPP" set BASE=%TP1_BASE%
+if "%COMPILER%" == "TC3" set BASE=%TC3_BASE%
+if "%COMPILER%" == "BC5" set BASE=%BC5_BASE%
+if "%COMPILER%" == "WATCOM" set BASE=%WATCOM%
+if "%COMPILER%" == "MSCL8" set BASE=%MSCL8_BASE%
+if "%BASE%" == "" goto clearset
+
+:-----------------------------------------------------------------------
+
+if not "%LINK%" == "" goto skip_link
+
+set LINK=%BASE%\bin\tlink/m/c
+if "%COMPILER%" == "TC2" set LINK=%BASE%\tlink/m/c
+if "%COMPILER%" == "WATCOM" set LINK=..\utils\wlinker/ma/nologo
+if "%COMPILER%" == "MSCL8" set LINK=%BASE%\bin\link/ONERROR:NOEXE /ma /nologo
+
+echo Linker is %LINK%
+
+:skip_link
+
+:-----------------------------------------------------------------------
+
+if not "%LIBUTIL%" == "" goto skip_lib
+
+set LIBPLUS=+
+set LIBTERM=
+set LIBUTIL=%BASE%\bin\tlib
+if "%COMPILER%" == "TC2" set LIBUTIL=%BASE%\tlib
+if "%COMPILER%" == "WATCOM" set LIBPLUS=
+if "%COMPILER%" == "WATCOM" set LIBUTIL=wlib -q
+if "%COMPILER%" == "MSCL8" set LIBTERM=;
+if "%COMPILER%" == "MSCL8" set LIBUTIL=%BASE%\bin\lib/nologo
+
+echo Librarian is %LIBUTIL%
+
+:skip_lib
+
+:-----------------------------------------------------------------------
+
+if not "%MAKE%" == "" goto skip_make
+
+set MAKE=%BASE%\bin\make
+if "%COMPILER%" == "TC2" set MAKE=%BASE%\make
+if "%COMPILER%" == "WATCOM" set MAKE=wmake/ms /h
+if "%COMPILER%" == "MSCL8" set MAKE=%BASE%\bin\nmake/nologo
+
+echo Make is %MAKE%
+
+:skip_make
+
+:-----------------------------------------------------------------------
+
+set LAST=1
+if "%LAST%" == "1" goto end
+
+:-----------------------------------------------------------------------
+
+:clearset
+
+set XCPU=
+set XFAT=
+set COMPILER=
+set TC2_BASE=
+set TP1_BASE=
+set TC3_BASE=
+set BC5_BASE=
+set MSCL8_BASE=
+set BASE=
+set LINK=
+set LIBUTIL=
+set LIBPLUS=
+set LIBTERM=
+set MAKE=
+set NASM=
+set XUPX=
+
+if not "%OLDPATH%" == "" set PATH=%OLDPATH%
+set OLDPATH=
+
+:end
diff -ruNp 0old/kernel/kernel.cfg 0new/kernel/kernel.cfg
--- 0old/kernel/kernel.cfg 2001-07-09 23:19:32.000000000 +0000
+++ 0new/kernel/kernel.cfg 1970-01-01 00:00:00.000000000 +0000
@@ -1,14 +0,0 @@
--1-
--f-
--ff-
--O
--Z
--d
--k-
--vi-
--w
--wpro
--weas
--wpre
--I..\hdr
--v -X- -I. -D__STDC__=0 -DTSC -DDEBUG -DKERNEL -DI86 -DPROTO -DSHWR -DASMSUPT
diff -ruNp 0old/kernel/makefile 0new/kernel/makefile
--- 0old/kernel/makefile 2004-01-25 22:37:20.000000000 +0000
+++ 0new/kernel/makefile 2004-04-03 12:41:04.000000000 +0000
@@ -6,36 +6,18 @@
!include "../mkfiles/generic.mak"
-RELEASE = 1.00
-
-# Compiler and Options
-
-INCLUDE=..\hdr
-LIB= $(COMPILERBASE)\lib
-
-LIBPATH = .
-#AFLAGS = /Mx /DSTANDALONE=1 /I..\HDR
-
-LIBS =..\lib\device.lib ..\lib\libm.lib
-#INITCFLAGS =$(ALLCFLAGS) -zAINIT -zCINIT_TEXT -zDIB -zRID -zTID -zPIGROUP -zBIB \
-#-zGIGROUP -zSIGROUP
-#CFLAGS =$(ALLCFLAGS) -zAHMA -zCHMA_TEXT
+LIBS=..\lib\device.lib ..\lib\libm.lib
HDR=../hdr/
-# *Implicit Rules*
-# 'standard' compiles
-
-.c.obj :
- $(CC) $(CFLAGS) $<
-
-# *List Macros*
-
+# *List Macros*
+# only 8 files per definition; this is limitation of DOS batch
+# files (only 9 directly accessible parameters).
OBJS1=kernel.obj entry.obj io.obj console.obj serial.obj printer.obj dsk.obj \
sysclk.obj
OBJS2=asmsupt.obj execrh.obj nlssupt.obj procsupt.obj dosidle.obj int2f.obj \
nls_hc.obj
-OBJS3= apisupt.obj intr.obj irqstack.obj blockio.obj chario.obj systime.obj \
+OBJS3=apisupt.obj intr.obj irqstack.obj blockio.obj chario.obj systime.obj \
error.obj
OBJS4=break.obj dosfns.obj fatdir.obj fatfs.obj fattab.obj fcbfns.obj \
inthndlr.obj
@@ -43,184 +25,177 @@ OBJS5=ioctl.obj dosnames.obj memmgr.obj
OBJS6=prf.obj misc.obj strings.obj syspack.obj lfnapi.obj
OBJS7=main.obj config.obj initoem.obj inithma.obj dyninit.obj iprf.obj \
initdisk.obj initclk.obj
-OBJS = $(OBJS1) $(OBJS2) $(OBJS3) $(OBJS4) $(OBJS5) $(OBJS6) $(OBJS7)
+OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(OBJS4) $(OBJS5) $(OBJS6) $(OBJS7)
# *Explicit Rules*
-production: ..\bin\kernel.sys
+production: ..\bin\$(TARGET).sys
-..\bin\kernel.sys: kernel.sys
+..\bin\$(TARGET).sys: kernel.sys
copy kernel.sys ..\bin
- copy kernel.sys ..\bin\$(THETARGET).sys
- copy kernel.map ..\bin\$(THETARGET).map
+ copy kernel.sys ..\bin\$(TARGET).sys
+ copy kernel.map ..\bin\$(TARGET).map
kernel.sys: kernel.exe ..\utils\exeflat.exe
$(XUPX) kernel.exe
..\utils\exeflat kernel.exe kernel.sys 0x60 -S0x10 -S0x8B $(UPXOPT)
-clobber: clean
+kernel.exe: $(TARGET).lnk $(OBJS) $(LIBS)
+ $(LINK) @$(TARGET).lnk;
+
+clobber: clean
-$(RM) kernel.exe kernel.sys status.me
clean:
- -$(RM) *.res *.obj *.bak *.crf *.xrf *.map *.lst *.cod *.err *.lnk
+ -$(RM) *.obj *.bak *.crf *.xrf *.map *.lst *.cod *.err *.lnk
# XXX: This is a very ugly way of linking the kernel, forced upon us by the
# inability of Turbo `make' 2.0 to perform command line redirection. -- ror4
ECHOTO=..\utils\echoto
-kernel.res: $(OBJS) $(LIBS)
- -$(RM) kernel.res
- $(ECHOTO) kernel.res $(OBJS1)+
- $(ECHOTO) kernel.res $(OBJS2)+
- $(ECHOTO) kernel.res $(OBJS3)+
- $(ECHOTO) kernel.res $(OBJS4)+
- $(ECHOTO) kernel.res $(OBJS5)+
- $(ECHOTO) kernel.res $(OBJS6)+
- $(ECHOTO) kernel.res $(OBJS7)
- $(ECHOTO) kernel.res kernel.exe
- $(ECHOTO) kernel.res kernel.map
- $(ECHOTO) kernel.res $(LIBS)
-
-kernel.exe: kernel.res $(OBJS) $(LIBS)
- $(LINK) @kernel.res;
+$(TARGET).lnk: turboc.cfg makefile ..\mkfiles\generic.mak ..\mkfiles\$(COMPILER).mak
+ -$(RM) *.lnk
+ $(ECHOTO) $(TARGET).lnk $(OBJS1)+
+ $(ECHOTO) $(TARGET).lnk $(OBJS2)+
+ $(ECHOTO) $(TARGET).lnk $(OBJS3)+
+ $(ECHOTO) $(TARGET).lnk $(OBJS4)+
+ $(ECHOTO) $(TARGET).lnk $(OBJS5)+
+ $(ECHOTO) $(TARGET).lnk $(OBJS6)+
+ $(ECHOTO) $(TARGET).lnk $(OBJS7)
+ $(ECHOTO) $(TARGET).lnk kernel.exe
+ $(ECHOTO) $(TARGET).lnk kernel.map
+ $(ECHOTO) $(TARGET).lnk $(LIBS)
# *Individual File Dependencies*
-kernel.obj: kernel.asm segs.inc ludivmul.inc
-
-console.obj: console.asm io.inc
-printer.obj: printer.asm io.inc
+kernel.obj: kernel.asm segs.inc ludivmul.inc $(TARGET).lnk
-serial.obj: serial.asm io.inc
+console.obj: console.asm io.inc $(TARGET).lnk
-entry.obj: entry.asm segs.inc $(HDR)stacks.inc
+printer.obj: printer.asm io.inc $(TARGET).lnk
-apisupt.obj: apisupt.asm segs.inc
+serial.obj: serial.asm io.inc $(TARGET).lnk
-execrh.obj: execrh.asm segs.inc
+entry.obj: entry.asm segs.inc $(HDR)stacks.inc $(TARGET).lnk
-int2f.obj: int2f.asm segs.inc
+apisupt.obj: apisupt.asm segs.inc $(TARGET).lnk
-intr.obj: intr.asm segs.inc
+execrh.obj: execrh.asm segs.inc $(TARGET).lnk
-io.obj: io.asm segs.inc
+int2f.obj: int2f.asm segs.inc $(TARGET).lnk
-irqstack.obj: irqstack.asm
+intr.obj: intr.asm segs.inc $(TARGET).lnk
-nls_hc.obj: nls_hc.asm segs.inc
+io.obj: io.asm segs.inc $(TARGET).lnk
-nlssupt.obj: nlssupt.asm segs.inc
+irqstack.obj: irqstack.asm $(TARGET).lnk
-procsupt.obj: procsupt.asm segs.inc $(HDR)stacks.inc
+nls_hc.obj: nls_hc.asm segs.inc $(TARGET).lnk
-dosidle.obj: dosidle.asm segs.inc
-
-# XXX: Special handling for initialization modules -- this is required because
-# TC 2.01 cannot handle `#pragma option' like TC 3 can. -- ror4
+nlssupt.obj: nlssupt.asm segs.inc $(TARGET).lnk
-INITHEADERS=init-mod.h init-dat.h
+procsupt.obj: procsupt.asm segs.inc $(HDR)stacks.inc $(TARGET).lnk
-CONFIGURATION = turboc.cfg makefile ..\mkfiles\generic.mak ..\mkfiles\$(COMPILER).MAK
+dosidle.obj: dosidle.asm segs.inc $(TARGET).lnk
-HEADERS=\
- $(HDR)portab.h $(HDR)device.h $(HDR)mcb.h $(HDR)pcb.h \
- $(HDR)fat.h $(HDR)fcb.h $(HDR)tail.h $(HDR)time.h $(HDR)process.h \
- $(HDR)dcb.h $(HDR)sft.h $(HDR)cds.h $(HDR)exe.h $(HDR)fnode.h \
- $(HDR)dirmatch.h $(HDR)file.h $(HDR)clock.h $(HDR)kbd.h $(HDR)error.h \
- $(HDR)version.h globals.h proto.h dyndata.h
+INITHEADERS=init-mod.h init-dat.h
-# XXX: I generated these using `gcc -MM' and `sed', so they may not be
-# completely correct... -- ror4
+HEADERS=$(HDR)portab.h $(HDR)device.h $(HDR)mcb.h $(HDR)pcb.h \
+$(HDR)fat.h $(HDR)fcb.h $(HDR)tail.h $(HDR)time.h $(HDR)process.h \
+$(HDR)dcb.h $(HDR)sft.h $(HDR)cds.h $(HDR)exe.h $(HDR)fnode.h \
+$(HDR)dirmatch.h $(HDR)file.h $(HDR)clock.h $(HDR)kbd.h $(HDR)error.h \
+$(HDR)version.h globals.h proto.h dyndata.h
-blockio.obj: blockio.c $(HEADERS) $(CONFIGURATION)
+blockio.obj: blockio.c $(HEADERS) $(TARGET).lnk
-break.obj: break.c $(HEADERS) $(CONFIGURATION)
+break.obj: break.c $(HEADERS) $(TARGET).lnk
-chario.obj: chario.c $(HEADERS) $(CONFIGURATION)
+chario.obj: chario.c $(HEADERS) $(TARGET).lnk
-dosfns.obj: dosfns.c $(HEADERS) $(CONFIGURATION)
+dosfns.obj: dosfns.c $(HEADERS) $(TARGET).lnk
-dosnames.obj: dosnames.c $(HEADERS) $(CONFIGURATION)
+dosnames.obj: dosnames.c $(HEADERS) $(TARGET).lnk
-dsk.obj: dsk.c $(HEADERS) $(CONFIGURATION)
+dsk.obj: dsk.c $(HEADERS) $(TARGET).lnk
-error.obj: error.c $(HEADERS) $(CONFIGURATION)
+error.obj: error.c $(HEADERS) $(TARGET).lnk
-fatdir.obj: fatdir.c $(HEADERS) $(CONFIGURATION)
+fatdir.obj: fatdir.c $(HEADERS) $(TARGET).lnk
-fatfs.obj: fatfs.c $(HEADERS) $(CONFIGURATION)
+fatfs.obj: fatfs.c $(HEADERS) $(TARGET).lnk
-fattab.obj: fattab.c $(HEADERS) $(CONFIGURATION)
+fattab.obj: fattab.c $(HEADERS) $(TARGET).lnk
-fcbfns.obj: fcbfns.c $(HEADERS) $(CONFIGURATION)
+fcbfns.obj: fcbfns.c $(HEADERS) $(TARGET).lnk
-inthndlr.obj: inthndlr.c $(HEADERS) $(CONFIGURATION)
+inthndlr.obj: inthndlr.c $(HEADERS) $(TARGET).lnk
-ioctl.obj: ioctl.c $(HEADERS) $(CONFIGURATION)
+ioctl.obj: ioctl.c $(HEADERS) $(TARGET).lnk
-memmgr.obj: memmgr.c $(HEADERS) $(CONFIGURATION)
+memmgr.obj: memmgr.c $(HEADERS) $(TARGET).lnk
-misc.obj: misc.c $(HEADERS) $(CONFIGURATION)
+misc.obj: misc.c $(HEADERS) $(TARGET).lnk
-lfnapi.obj: lfnapi.c $(HEADERS) $(CONFIGURATION)
+lfnapi.obj: lfnapi.c $(HEADERS) $(TARGET).lnk
-newstuff.obj: newstuff.c $(HEADERS) $(CONFIGURATION)
+newstuff.obj: newstuff.c $(HEADERS) $(TARGET).lnk
-network.obj: network.c $(HEADERS) $(CONFIGURATION)
+network.obj: network.c $(HEADERS) $(TARGET).lnk
-nls.obj: nls.c $(HEADERS) $(CONFIGURATION)
+nls.obj: nls.c $(HEADERS) $(TARGET).lnk
# \
# 001-437.nls
-prf.obj: prf.c $(HDR)portab.h $(CONFIGURATION)
+prf.obj: prf.c $(HDR)portab.h $(TARGET).lnk
-strings.obj: strings.c $(CONFIGURATION)
+strings.obj: strings.c $(TARGET).lnk
-sysclk.obj: sysclk.c $(HEADERS) $(CONFIGURATION)
+sysclk.obj: sysclk.c $(HEADERS) $(TARGET).lnk
-syspack.obj: syspack.c $(HEADERS) $(CONFIGURATION)
+syspack.obj: syspack.c $(HEADERS) $(TARGET).lnk
-systime.obj: systime.c $(HEADERS) $(CONFIGURATION)
+systime.obj: systime.c $(HEADERS) $(TARGET).lnk
-task.obj: task.c $(HEADERS) $(CONFIGURATION)
+task.obj: task.c $(HEADERS) $(TARGET).lnk
# now the funny stuff :-)
# Files in the INIT segment
-# $(CC) $(INITCFLAGS) -c $*.c
-# patchobj $*.obj $(INITPATCH)
+# XXX: Special handling for initialization modules -- this is required because
+# TC 2.01 cannot handle `#pragma option' like TC 3 can. -- ror4
-config.obj: config.c $(INITHEADERS) $(HEADERS) $(CONFIGURATION)
- $(CC) $(INITCFLAGS) $*.c
- $(INITPATCH) $*.obj
-
-initoem.obj: initoem.c $(INITHEADERS) $(HEADERS) $(CONFIGURATION)
- $(CC) $(INITCFLAGS) $*.c
- $(INITPATCH) $*.obj
-
-main.obj: main.c $(INITHEADERS) $(HEADERS) $(CONFIGURATION)
- $(CC) $(INITCFLAGS) $*.c
- $(INITPATCH) $*.obj
-
-inithma.obj: inithma.c $(INITHEADERS) $(HEADERS) $(CONFIGURATION)
- $(CC) $(INITCFLAGS) $*.c
- $(INITPATCH) $*.obj
-
-dyninit.obj: dyninit.c $(INITHEADERS) $(HEADERS) $(CONFIGURATION)
- $(CC) $(INITCFLAGS) $*.c
- $(INITPATCH) $*.obj
-
-initdisk.obj: initdisk.c $(INITHEADERS) $(HEADERS) $(CONFIGURATION)
- $(CC) $(INITCFLAGS) $*.c
- $(INITPATCH) $*.obj
-
-initclk.obj: initclk.c $(INITHEADERS) $(HEADERS) $(CONFIGURATION)
- $(CC) $(INITCFLAGS) $*.c
- $(INITPATCH) $*.obj
+config.obj: config.c $(INITHEADERS) $(HEADERS) $(TARGET).lnk
+ $(CC) $(INITCFLAGS) $*.c
+ $(INITPATCH) $*.obj
+
+initoem.obj: initoem.c $(INITHEADERS) $(HEADERS) $(TARGET).lnk
+ $(CC) $(INITCFLAGS) $*.c
+ $(INITPATCH) $*.obj
+
+main.obj: main.c $(INITHEADERS) $(HEADERS) $(TARGET).lnk
+ $(CC) $(INITCFLAGS) $*.c
+ $(INITPATCH) $*.obj
+
+inithma.obj: inithma.c $(INITHEADERS) $(HEADERS) $(TARGET).lnk
+ $(CC) $(INITCFLAGS) $*.c
+ $(INITPATCH) $*.obj
+
+dyninit.obj: dyninit.c $(INITHEADERS) $(HEADERS) $(TARGET).lnk
+ $(CC) $(INITCFLAGS) $*.c
+ $(INITPATCH) $*.obj
+
+initdisk.obj: initdisk.c $(INITHEADERS) $(HEADERS) $(TARGET).lnk
+ $(CC) $(INITCFLAGS) $*.c
+ $(INITPATCH) $*.obj
+
+initclk.obj: initclk.c $(INITHEADERS) $(HEADERS) $(TARGET).lnk
+ $(CC) $(INITCFLAGS) $*.c
+ $(INITPATCH) $*.obj
#the printf for INIT_TEXT - yet another special case, this file includes prf.c
-iprf.obj: iprf.c prf.c $(HDR)portab.h $(CONFIGURATION)
- $(CC) $(INITCFLAGS) $*.c
- $(INITPATCH) $*.obj
+
+iprf.obj: iprf.c prf.c $(HDR)portab.h $(TARGET).lnk
+ $(CC) $(INITCFLAGS) $*.c
+ $(INITPATCH) $*.obj
diff -ruNp 0old/kernel/turboc.cfg 0new/kernel/turboc.cfg
--- 0old/kernel/turboc.cfg 2003-09-09 18:25:24.000000000 +0000
+++ 0new/kernel/turboc.cfg 2004-03-09 23:54:30.000000000 +0000
@@ -1,15 +1,10 @@
--f-
--ff-
--O
--Z
-d
+-f-
-k-
+-O -Z
+-p
+-v-
-vi-
--wpro
--weas
--wpre
--w
--g1
+-w -g1
-I..\hdr
--p
--v- -I. -D__STDC__=0 -DKERNEL -DI86 -DPROTO -DASMSUPT
+-DKERNEL;I86;PROTO;ASMSUPT
diff -ruNp 0old/mkfiles/bc5.mak 0new/mkfiles/bc5.mak
--- 0old/mkfiles/bc5.mak 2003-06-15 12:50:06.000000000 +0000
+++ 0new/mkfiles/bc5.mak 2004-03-27 09:54:58.000000000 +0000
@@ -4,15 +4,8 @@
# Use these for Borland C++
-COMPILERPATH=$(BC5_BASE)
-COMPILERBIN=$(COMPILERPATH)\bin
-CC=$(COMPILERBIN)\bcc -c
-CL=$(COMPILERBIN)\bcc
-INCLUDEPATH=$(COMPILERPATH)\include
-LIBUTIL=$(COMPILERBIN)\tlib
-LIBPATH=$(COMPILERPATH)\lib
-LIBTERM=
-LIBPLUS=+
+CC=$(BINPATH)\bcc -c
+CL=$(BINPATH)\bcc
TINY=-lt
CFLAGST=-L$(LIBPATH) -mt -a- -k- -f- -ff- -O -Z -d
@@ -22,9 +15,9 @@ TARGET=KBC
# used for building the library
-CLIB=$(COMPILERPATH)\lib\cs.lib
+CLIB=$(LIBPATH)\cs.lib
MATH_EXTRACT=*H_LDIV *H_LLSH *H_LURSH *F_LXMUL
-MATH_INSERT=+H_LDIV +H_LLSH +H_LURSH +F_LXMUL
+MATH_INSERT =+H_LDIV +H_LLSH +H_LURSH +F_LXMUL
#
# heavy stuff - building the kernel
diff -ruNp 0old/mkfiles/generic.mak 0new/mkfiles/generic.mak
--- 0old/mkfiles/generic.mak 2004-01-25 22:20:34.000000000 +0000
+++ 0new/mkfiles/generic.mak 2004-04-03 11:09:42.000000000 +0000
@@ -5,43 +5,52 @@
#* TARGETOPT : options, handled down to the compiler
#**********************************************************************
-TARGETOPT=-1-
+!ifndef XFAT
+XFAT=32
+!endif
+!if $(XFAT) == 32
+ALLCFLAGS=$(ALLCFLAGS) -DWITHFAT32
+NASMFLAGS=$(NASMFLAGS) -DWITHFAT32
+!endif
+
+NASMFLAGS=$(NASMFLAGS) -i../hdr/
+TARGETOPT=-1-
+!ifndef XCPU
+XCPU=86
+!endif
!if $(XCPU) == 186
TARGETOPT=-1
!endif
!if $(XCPU) == 386
TARGETOPT=-3
+NASMFLAGS=$(NASMFLAGS) -DI386
!endif
-!if $(XFAT) == 32
-ALLCFLAGS=$(ALLCFLAGS) -DWITHFAT32
-NASMFLAGS=$(NASMFLAGS) -DWITHFAT32
-!endif
-
-NASM=$(XNASM)
-!if $(XCPU) == 386
-NASMFLAGS = $(NASMFLAGS) -i../hdr/ -DI386
+!ifndef XUPX
[EMAIL PROTECTED]
+UPXOPT=
!else
-NASMFLAGS = $(NASMFLAGS) -i../hdr/
+UPXOPT=-U
!endif
-
-LINK=$(XLINK)
-
[EMAIL PROTECTED]
+BINPATH=$(BASE)\bin
+INCLUDEPATH=$(BASE)\include
+LIBPATH=$(BASE)\lib
+
!include "..\mkfiles\$(COMPILER).mak"
-THETARGET=$(TARGET)$(XCPU)$(XFAT)
+TARGET=$(TARGET)$(XCPU)$(XFAT)
RM=..\utils\rmfiles
-.asm.obj :
- $(NASM) -D$(COMPILER) $(NASMFLAGS) -f obj $*.asm
-
# *Implicit Rules*
-.c.obj :
- $(CC) $(CFLAGS) $*.c
-.cpp.obj :
- $(CC) $(CFLAGS) $*.cpp
+.asm.obj:
+ $(NASM) -D$(COMPILER) $(NASMFLAGS) -f obj $<
+
+.c.obj:
+ $(CC) $(CFLAGS) $<
+.cpp.obj:
+ $(CC) $(CFLAGS) $<
diff -ruNp 0old/mkfiles/mscl8.mak 0new/mkfiles/mscl8.mak
--- 0old/mkfiles/mscl8.mak 2003-08-28 21:37:20.000000000 +0000
+++ 0new/mkfiles/mscl8.mak 2004-03-27 09:55:04.000000000 +0000
@@ -3,31 +3,19 @@
#
# Use these for MSCV 1.52
-COMPILERPATH=$(MS_BASE)
-COMPILERBIN=$(COMPILERPATH)\bin
-INCLUDEPATH=$(COMPILERPATH)\include
-CC=$(COMPILERBIN)\cl -c
-CL=$(COMPILERBIN)\cl
+
+CC=$(BINPATH)\cl -c
+CL=$(BINPATH)\cl
+
+INCLUDE=$(BASE)\include
+LIB=$(BASE)\lib
+
TINY=
CFLAGST=/Fm /AT /Os /Zp1
CFLAGSC=/Fm /AL /Os /Zp1
-LIBPATH=$(COMPILERPATH)\lib
-LIB=$(COMPILERPATH)\lib
-INCLUDE=$(COMPILERPATH)\include
-LIBUTIL=$(COMPILERBIN)\lib /nologo
-LIBPLUS=+
-LIBTERM=;
-INCLUDE=$(COMPILERPATH)\include
-LIB=$(COMPILERPATH)\lib
-
-# used for building the library
-
-CLIB=$(COMPILERPATH)\lib\slibce.lib
-MATH_EXTRACT=*aflmul *aFlshl *aFNauldi *aFulrem *aFulshr *aFuldiv *aFlrem *aFldiv
-MATH_INSERT= +aflmul +aFlshl +aFNauldi +aFulrem +aFulshr +aFuldiv +aFlrem +aFldiv
TARGETOPT=
-!if $(XCPU) == 186
+!if $(XCPU) == 186
TARGETOPT=-G1
!endif
!if $(XCPU) == 386
@@ -36,12 +24,16 @@ TARGETOPT=-G3
TARGET=KMS
+# used for building the library
+
+CLIB=$(LIBPATH)\slibce.lib
+MATH_EXTRACT=*aflmul *aFlshl *aFNauldi *aFulrem *aFulshr *aFuldiv *aFlrem *aFldiv
+MATH_INSERT =+aflmul +aFlshl +aFNauldi +aFulrem +aFulshr +aFuldiv +aFlrem +aFldiv
+
#
# heavy stuff - building
-
ALLCFLAGS=-I..\hdr $(TARGETOPT) $(ALLCFLAGS) -nologo -Zl -Fc -WX -Gr -f- -Os -Gs -Ob1
-OV4 -Gy -Oe -Zp1
-
INITCFLAGS=$(ALLCFLAGS) -NTINIT_TEXT -AT
CFLAGS=$(ALLCFLAGS) -NTHMA_TEXT
-INITPATCH = ..\utils\patchobj _DATA=IDATA DATA=ID BSS=ID DGROUP=I_GROUP CONST=IC
+INITPATCH=..\utils\patchobj _DATA=IDATA DATA=ID BSS=ID DGROUP=I_GROUP CONST=IC
diff -ruNp 0old/mkfiles/tc2.mak 0new/mkfiles/tc2.mak
--- 0old/mkfiles/tc2.mak 2003-09-18 22:43:02.000000000 +0000
+++ 0new/mkfiles/tc2.mak 2004-03-27 09:55:18.000000000 +0000
@@ -1,18 +1,12 @@
#
-# TURBOC.MAK - kernel copiler options for TURBOC
+# TC2.MAK - kernel copiler options for Turbo C
#
# Use these for Turbo C 2.01
-COMPILERPATH=$(TC2_BASE)
-COMPILERBIN=$(COMPILERPATH)
-CC=$(COMPILERBIN)\tcc -c
-CL=$(COMPILERBIN)\tcc
-INCLUDEPATH=$(COMPILERPATH)\include
-LIBUTIL=$(COMPILERBIN)\tlib
-LIBPATH=$(COMPILERPATH)\lib
-LIBTERM=
-LIBPLUS=+
+BINPATH=$(BASE)
+CC=$(BINPATH)\tcc -c
+CL=$(BINPATH)\tcc
TINY=-lt
CFLAGST=-L$(LIBPATH) -mt -a- -k- -f- -ff- -O -Z -d
@@ -22,9 +16,9 @@ TARGET=KTC
# used for building the library
-CLIB=$(COMPILERPATH)\lib\cs.lib
+CLIB=$(LIBPATH)\cs.lib
MATH_EXTRACT=*LDIV *LXMUL *LURSH *LLSH *LRSH
-MATH_INSERT=+LDIV +LXMUL +LURSH +LLSH +LRSH
+MATH_INSERT =+LDIV +LXMUL +LURSH +LLSH +LRSH
#
# heavy stuff - building the kernel
diff -ruNp 0old/mkfiles/tc3.mak 0new/mkfiles/tc3.mak
--- 0old/mkfiles/tc3.mak 2003-06-15 12:52:14.000000000 +0000
+++ 0new/mkfiles/tc3.mak 2004-03-27 09:55:24.000000000 +0000
@@ -4,15 +4,8 @@
# Use these for Turbo C 3.0
-COMPILERPATH=$(TC3_BASE)
-COMPILERBIN=$(COMPILERPATH)\bin
-CC=$(COMPILERBIN)\tcc -c
-CL=$(COMPILERBIN)\tcc
-INCLUDEPATH=$(COMPILERPATH)\include
-LIBUTIL=$(COMPILERBIN)\tlib
-LIBPATH=$(COMPILERPATH)\lib
-LIBTERM=
-LIBPLUS=+
+CC=$(BINPATH)\tcc -c
+CL=$(BINPATH)\tcc
TINY=-lt
CFLAGST=-L$(LIBPATH) -mt -a- -k- -f- -ff- -O -Z -d
@@ -22,9 +15,9 @@ TARGET=KT3
# used for building the library
-CLIB=$(COMPILERPATH)\lib\cs.lib
+CLIB=$(LIBPATH)\cs.lib
MATH_EXTRACT=*H_LDIV *H_LLSH *H_LURSH *F_LXMUL
-MATH_INSERT=+H_LDIV +H_LLSH +H_LURSH +F_LXMUL
+MATH_INSERT =+H_LDIV +H_LLSH +H_LURSH +F_LXMUL
#
# heavy stuff - building the kernel
diff -ruNp 0old/mkfiles/turbocpp.mak 0new/mkfiles/turbocpp.mak
--- 0old/mkfiles/turbocpp.mak 2003-06-15 13:33:50.000000000 +0000
+++ 0new/mkfiles/turbocpp.mak 2004-03-27 09:55:28.000000000 +0000
@@ -4,15 +4,8 @@
# Use these for Turbo CPP 1.01
-COMPILERPATH=$(TP1_BASE)
-COMPILERBIN=$(COMPILERPATH)\bin
-CC=$(COMPILERBIN)\tcc -c
-CL=$(COMPILERBIN)\tcc
-INCLUDEPATH=$(COMPILERPATH)\include
-LIBUTIL=$(COMPILERBIN)\tlib
-LIBPATH=$(COMPILERPATH)\lib
-LIBTERM=
-LIBPLUS=+
+CC=$(BINPATH)\tcc -c
+CL=$(BINPATH)\tcc
TINY=-lt
CFLAGST=-L$(LIBPATH) -mt -a- -k- -f- -ff- -O -Z -d
@@ -22,9 +15,9 @@ TARGET=KTP
# used for building the library
-CLIB=$(COMPILERPATH)\lib\cs.lib
+CLIB=$(LIBPATH)\cs.lib
MATH_EXTRACT=*H_LDIV *H_LLSH *H_LURSH *F_LXMUL
-MATH_INSERT=+H_LDIV +H_LLSH +H_LURSH +F_LXMUL
+MATH_INSERT =+H_LDIV +H_LLSH +H_LURSH +F_LXMUL
#
# heavy stuff - building the kernel
diff -ruNp 0old/mkfiles/watcom.mak 0new/mkfiles/watcom.mak
--- 0old/mkfiles/watcom.mak 2003-09-18 22:43:02.000000000 +0000
+++ 0new/mkfiles/watcom.mak 2004-04-03 12:08:58.000000000 +0000
@@ -3,23 +3,15 @@
#
# Use these for WATCOM 11.0c
-COMPILERPATH=$(WATCOM)
+
CC=*wcc
CL=wcl
-INCLUDEPATH=$(COMPILERPATH)\H
-INCLUDE=$(COMPILERPATH)\h
-EDPATH=$(COMPILERPATH)\EDDAT
+INCLUDEPATH=$(BASE)\H
+LIBPATH=$(BASE)\lib286
-!if $(XCPU) != 186
-!if $(XCPU) != 386
+!if $(XCPU) < 186
TARGETOPT=-0
!endif
-!endif
-
-LIBPATH=$(COMPILERPATH)\lib286
-LIBUTIL=wlib -q
-LIBPLUS=
-LIBTERM=
TINY=-mt
CFLAGST=-zq-zp1-os-s-we-e3-wx
@@ -29,40 +21,34 @@ TARGET=KWC
# used for building the library
-CLIB=$(COMPILERPATH)\lib286\dos\clibm.lib
-
-# we use our own ones, which override these ones when linking.
-#
-
+CLIB=$(LIBPATH)\dos\clibm.lib
MATH_EXTRACT=*i4m
-MATH_INSERT=+i4m
-
+MATH_INSERT =+i4m
#
-# heavy stuff - building
+# heavy stuff - building
#
# -e=<num> set limit on number of error messages
# -ms small memory model (small code/small data)
-# -j change char default from unsigned to signed
-#-nc=<id> set code class name
-#-nd=<id> set data segment name
-#-nm=<file> set module name
-#-nt=<id> set name of text segment
+# -j change char default from unsigned to signed
+# -nc=<id> set code class name
+# -nd=<id> set data segment name
+# -nm=<file> set module name
+# -nt=<id> set name of text segment
# -g=<id> set code group name
# -os -> favor code size over execution time in optimizations
-# -s remove stack overflow checks
-# -w=<num> set warning level number
-# -we treat all warnings as errors
+# -s remove stack overflow checks
+# -w=<num> set warning level number
+# -we treat all warnings as errors
# -ze enable extensions (i.e., near, far, export, etc.)
# -zl remove default library information
# -zp=<num> pack structure members with alignment {1,2,4,8,16}
# -zq operate quietly
#
-# -3 optimization for 386 - given in CONFIG.MAK, not here
+# -3 optimization for 386 - given in GENERIC.MAK, not here
#
-ALLCFLAGS=-I..\hdr $(TARGETOPT) $(ALLCFLAGS)-zq-os-s-e5-j-zl-zp1-wx-we-zgf-zff
+ALLCFLAGS=-I..\hdr $(TARGETOPT) $(ALLCFLAGS)-zq-os-s-e5-j-zl-zp1-wx-we-zgf-zff-d1
INITCFLAGS=$(ALLCFLAGS)-ntINIT_TEXT-ndI
CFLAGS=$(ALLCFLAGS)-ntHMA_TEXT
INITPATCH=..\utils\patchobj __U4D=_IU4D __U4M=_IU4M
-
diff -ruNp 0old/utils/indent.ini 0new/utils/indent.ini
--- 0old/utils/indent.ini 2001-11-18 18:18:12.000000000 +0000
+++ 0new/utils/indent.ini 1970-01-01 00:00:00.000000000 +0000
@@ -1,18 +0,0 @@
--kr
--di2
--nbc
--nfca
--bl
--bli0
--ss
--npcs
--ncs
--nbs
--i2
--ci4
--nce
--sob
--nut
--nbad
--cli2
--hnl
diff -ruNp 0old/utils/makefile 0new/utils/makefile
--- 0old/utils/makefile 2003-09-14 17:28:28.000000000 +0000
+++ 0new/utils/makefile 2004-04-03 10:23:32.000000000 +0000
@@ -1,6 +1,6 @@
!include "../mkfiles/generic.mak"
-CFLAGS = -I$(INCLUDEPATH) -I..\hdr
+CFLAGS=-I$(INCLUDEPATH) -I..\hdr
production: patchobj.com exeflat.exe
@@ -14,6 +14,5 @@ exeflat.exe: exeflat.c ../hdr/exe.h
clobber: clean
clean:
- $(RM) *.obj *.bak *.crf *.xrf *.map *.lst *.las *.cod *.err status.me
- $(RM) exeflat.exe patchobj.com
-
+ $(RM) *.obj *.bak *.crf *.xrf *.map *.lst *.las *.cod *.err \
+ status.me exeflat.exe patchobj.com
diff -ruNp 0old/utils/proto.bat 0new/utils/proto.bat
--- 0old/utils/proto.bat 2001-11-17 23:26:44.000000000 +0000
+++ 0new/utils/proto.bat 1970-01-01 00:00:00.000000000 +0000
@@ -1,2 +0,0 @@
-for %%f in ( %1 %2 %3 %4 %5 %6 %7 %8 %9 ) do mkptypes %%f >>proto.h
-
diff -ruNp 0old/utils/rmfiles.bat 0new/utils/rmfiles.bat
--- 0old/utils/rmfiles.bat 2002-01-23 22:29:40.000000000 +0000
+++ 0new/utils/rmfiles.bat 2004-03-27 06:10:04.000000000 +0000
@@ -2,9 +2,8 @@
:loop_commandline
if \%1 == \ goto done_with_commandline
-if exist %1 del %1
+if exist %1 del %1>nul
shift
goto loop_commandline
:done_with_commandline
-
diff -ruNp 0old/utils/wlinker.bat 0new/utils/wlinker.bat
--- 0old/utils/wlinker.bat 2003-09-14 20:53:56.000000000 +0000
+++ 0new/utils/wlinker.bat 2004-04-03 11:38:24.000000000 +0000
@@ -1,4 +1,4 @@
@echo off
-ms2wlink %1 %2 %3 %4 %5 %6 %7 %8 %9 ,,,, > kernel.lnk
-echo op map,statics,verbose >> kernel.lnk
-wlink < kernel.lnk
+ms2wlink %1 %2 %3 %4 %5 %6 %7 %8 %9 ,,,,>kernel.lnk
+echo op map,statics,verbose>>kernel.lnk
+call wlink @kernel.lnk
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Freedos-kernel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freedos-kernel
--- End Message ---
