From: Martin Mansfield <mrmansfi...@ymail.com>
-------------------------------------------- On Thu, 16/2/17, Martin Mansfield <mrmansfi...@ymail.com> wrote: Subject: FD 1.2 installation problem with AHCI enabled for SATA controller To: freedos-user@lists.sourceforge.net Date: Thursday, 16 February, 2017, 15:51 After installing FD 1.2 with SATA mode set to IDE I set it back to AHCI and found that UDVD2 is also used when booting from hard disk and so the CD/DVD drive cannot be accessed. Re point 3 in previous post, of course eltorito.sys detects the CDROM using a different mechanism if the PC has been booted from it. MM ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user --- Internet Rex 2.29 * Origin: capcity2.synchro.net - 502/875-8938 (276:10/901) --- Synchronet 3.15a-Linux ListGate 1.3 * Capitol City Online - Frankfort, KY - telnet://capitolcityonline.net ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
