Try using Georg Potthast's NICSCAN [0][1] or David Dunfield's PCINIC [2][3] to find the NIC. I think PCINIC can even suggest a driver from PKTDRV [4].
[0] http://www.georgpotthast.de/sioux/packet.htm [1] http://www.georgpotthast.de/sioux/pktdrv/nicscan.zip [2] http://dunfield.classiccmp.org/dos/ [3] http://dunfield.classiccmp.org/dos/pcinic.zip [4] http://dunfield.classiccmp.org/dos/pktdrv.zip On Mon, Jul 26, 2021 at 4:03 PM Dan Schmidt <[email protected]> wrote: > Well, I can tell you this much isn't right: > >My Ethernet Address Is FF:FF:FF:FF:FF:FF > That driver doesn't like or can't find your card. > > > > On Mon, Jul 26, 2021 at 4:25 AM Richard Hoffman < > [email protected]> wrote: > >> Hi, >> >> I have been having trouble setting up my ethernet card on my freedos >> installation. I am currently attempting to set up this card with the >> LNE100TX.com packet driver. >> >> I run the driver with LNE100TX 0x60 and I get the following >> >> Autonegotiation Not Complete >> Packet Driver Interrupt Number 0X60 >> IO Port 0xDC00 >> Hardware Interrupt Number 11 >> Media Type Is 100baseTX Full Duplex >> My Ethernet Address Is FF:FF:FF:FF:FF:FF >> Packet Driver is loaded at segment 3C2 >> >> I have my network wired from my DSL router to an 8 port 10/100 mbps >> switch. From there it goes to my windows 10 pc and my freedos pc. >> >> I have tried about every switch option with the packet driver and I keep >> getting the same result. Is this a hardware problem with the ethernet card >> or is it a router issue? >> >> Also could this be an IRQ conflict? >> >> Thanks. >> _______________________________________________ >> Freedos-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/freedos-user >> > _______________________________________________ > Freedos-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freedos-user >
_______________________________________________ Freedos-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freedos-user
