Hi! Here is an interesting thread about DOS networking: https://www.bttr-software.de/forum/board_entry.php?id=21820&page=0&order=time&category=0 For RealTek GbE (gigabit ethernet, LAN) there were no packet drivers on http://www.georgpotthast.de/sioux/packet.htm but a NDIS2 driver, https://drivers.eu/Network/RealTek/RTL8111/DOS exists and there was a discussion about possibly updating existing open drivers. https://www.realtek.com/Download/Index?cate_id=194&menu_id=297 seems to have a problem with JEMMEX. Shims like http://www.shikadi.net/network/ could convert different APIs into each otther. In the end, David wrote: "Hello, ethernet is working :) This could be usefull for someone who use NDIS package to packet driver Realtek conversion" so you can use the description on how David made it work if you also have an Ethernet controller for which only NDIS exists :-) See also: https://www.shikadi.net/network/ shim convertor dis_pkt11(9).zip https://www.realtek.com/Download/ realtek NDIS for rtl8168 chip RayeR confirms that the method is what RayeR uses as well :-) Regards, Eric _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
