freedreno  

Messages by Thread

• [PATCH 0/2] driver core: platform: / drm/msm: dp: Delay applying clock defaults Stephan Gerhold
  • [PATCH 1/2] driver core: platform: Add option to skip/delay applying clock defaults Stephan Gerhold
  • [PATCH 2/2] drm/msm: dp: Delay applying clock defaults until PHY is fully enabled Stephan Gerhold
  • Re: [PATCH 0/2] driver core: platform: / drm/msm: dp: Delay applying clock defaults Dmitry Baryshkov
  • Re: [PATCH 0/2] driver core: platform: / drm/msm: dp: Delay applying clock defaults Stephan Gerhold
• [PATCH 0/2] drm/msm/dpu: use full scale alpha in generic code Dmitry Baryshkov
  • [PATCH 1/2] drm/msm/dpu: simplify bg_alpha selection Dmitry Baryshkov
  • [PATCH 2/2] drm/msm/dpu: use full scale alpha in _dpu_crtc_setup_blend_cfg() Dmitry Baryshkov
• [PATCH 0/4] soc: qcom: ubwc: more fixes and missing platforms Dmitry Baryshkov
  • [PATCH 1/4] soc: qcom: ubwc: use no-uwbc config for MSM8917 Dmitry Baryshkov
  • Re: [PATCH 1/4] soc: qcom: ubwc: use no-uwbc config for MSM8917 Konrad Dybcio
  • [PATCH 2/4] soc: qcom: ubwc: add more missing platforms Dmitry Baryshkov
  • Re: [PATCH 2/4] soc: qcom: ubwc: add more missing platforms Konrad Dybcio
  • [PATCH 3/4] soc: qcom: add configuration for MSM8929 Dmitry Baryshkov
  • Re: [PATCH 3/4] soc: qcom: add configuration for MSM8929 Konrad Dybcio
  • [PATCH 4/4] soc: qcom: use no-UBWC config for MSM8956/76 Dmitry Baryshkov
  • Re: [PATCH 4/4] soc: qcom: use no-UBWC config for MSM8956/76 Konrad Dybcio
  • Re: [PATCH 4/4] soc: qcom: use no-UBWC config for MSM8956/76 Dmitry Baryshkov
• [PATCH] drm/msm: skip re-emitting IBs for unusable VMs Antonino Maniscalco
• [PATCH v2 0/9] drm: convert from clk round_rate() to determine_rate() Brian Masney
  • [PATCH v2 1/9] drm/imx/ipuv3/imx-tve: convert from round_rate() to determine_rate() Brian Masney
  • [PATCH v2 4/9] drm/msm/hdmi_pll_8960: convert from round_rate() to determine_rate() Brian Masney
  • [PATCH v2 6/9] drm/stm/dw_mipi_dsi-stm: convert from round_rate() to determine_rate() Brian Masney
  • [PATCH v2 7/9] drm/stm/lvds: convert from round_rate() to determine_rate() Brian Masney
  • [PATCH v2 2/9] drm/mcde/mcde_clk_div: convert from round_rate() to determine_rate() Brian Masney
  • [PATCH v2 5/9] drm/pl111: convert from round_rate() to determine_rate() Brian Masney
  • [PATCH v2 3/9] drm/msm/disp/mdp4/mdp4_lvds_pll: convert from round_rate() to determine_rate() Brian Masney
  • [PATCH v2 8/9] drm/sun4i/sun4i_hdmi_ddc_clk: convert from round_rate() to determine_rate() Brian Masney
  • [PATCH v2 9/9] drm/sun4i/sun4i_tcon_dclk: convert from round_rate() to determine_rate() Brian Masney
• [RFC PATCH 0/8] Refactor drm_writeback_connector structure Suraj Kandpal
  • [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Suraj Kandpal
  • Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Laurent Pinchart
  • Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Dmitry Baryshkov
  • Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Laurent Pinchart
  • RE: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Kandpal, Suraj
  • Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Dmitry Baryshkov
  • RE: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Kandpal, Suraj
  • Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Laurent Pinchart
  • Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure liviu.du...@arm.com
  • RE: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Kandpal, Suraj
  • Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Dmitry Baryshkov
  • RE: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Kandpal, Suraj
  • Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Dmitry Baryshkov
  • RE: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure Kandpal, Suraj
  • [RFC PATCH 2/8] drm/amd/display: Adapt amd writeback to new drm_writeback_connector Suraj Kandpal
  • [RFC PATCH 4/8] drm/arm/mali: Adapt mali writeback to new drm_writeback_connector Suraj Kandpal
  • [RFC PATCH 3/8] drm/arm/komeda: Adapt komeda writeback to new drm_writeback_connector Suraj Kandpal
  • [RFC PATCH 5/8] drm/vc4: Adapt vc4 writeback to new drm_writeback_connector Suraj Kandpal
  • [RFC PATCH 6/8] drm/vkms: Adapt vkms writeback to new drm_writeback_connector Suraj Kandpal
  • Re: [RFC PATCH 6/8] drm/vkms: Adapt vkms writeback to new drm_writeback_connector Louis Chauvet
  • RE: [RFC PATCH 6/8] drm/vkms: Adapt vkms writeback to new drm_writeback_connector Kandpal, Suraj
  • Re: [RFC PATCH 6/8] drm/vkms: Adapt vkms writeback to new drm_writeback_connector Louis Chauvet
  • [RFC PATCH 7/8] drm/rcar_du: Adapt vkms writeback to new drm_writeback_connector Suraj Kandpal
  • Re: [RFC PATCH 7/8] drm/rcar_du: Adapt vkms writeback to new drm_writeback_connector Laurent Pinchart
  • RE: [RFC PATCH 7/8] drm/rcar_du: Adapt vkms writeback to new drm_writeback_connector Kandpal, Suraj
  • Re: [RFC PATCH 7/8] drm/rcar_du: Adapt vkms writeback to new drm_writeback_connector Louis Chauvet
  • [RFC PATCH 8/8] drm/msm/dpu: Adapt dpu writeback to new drm_writeback_connector Suraj Kandpal
  • Re: [RFC PATCH 8/8] drm/msm/dpu: Adapt dpu writeback to new drm_writeback_connector Dmitry Baryshkov
  • RE: [RFC PATCH 8/8] drm/msm/dpu: Adapt dpu writeback to new drm_writeback_connector Kandpal, Suraj
• [PATCH v3] drm/msm: Don't use %pK through printk Thomas Weißschuh
• [PATCH v2 0/7] drm/msm/dsi/phy: convert from clk round_rate() to determine_rate() Brian Masney
  • [PATCH v2 1/7] drm/msm/dsi_phy_10nm: convert from round_rate() to determine_rate() Brian Masney
  • Re: [PATCH v2 1/7] drm/msm/dsi_phy_10nm: convert from round_rate() to determine_rate() Dmitry Baryshkov
  • Re: [PATCH v2 1/7] drm/msm/dsi_phy_10nm: convert from round_rate() to determine_rate() Konrad Dybcio
  • [PATCH v2 3/7] drm/msm/dsi_phy_28nm_8960: convert from round_rate() to determine_rate() Brian Masney
  • Re: [PATCH v2 3/7] drm/msm/dsi_phy_28nm_8960: convert from round_rate() to determine_rate() Dmitry Baryshkov
  • Re: [PATCH v2 3/7] drm/msm/dsi_phy_28nm_8960: convert from round_rate() to determine_rate() Konrad Dybcio
  • [PATCH v2 4/7] drm/msm/dsi_phy_28nm: convert from round_rate() to determine_rate() Brian Masney
  • Re: [PATCH v2 4/7] drm/msm/dsi_phy_28nm: convert from round_rate() to determine_rate() Konrad Dybcio
  • Re: [PATCH v2 4/7] drm/msm/dsi_phy_28nm: convert from round_rate() to determine_rate() Dmitry Baryshkov
  • [PATCH v2 5/7] drm/msm/dsi_phy_7nm: convert from round_rate() to determine_rate() Brian Masney
  • Re: [PATCH v2 5/7] drm/msm/dsi_phy_7nm: convert from round_rate() to determine_rate() Konrad Dybcio
  • Re: [PATCH v2 5/7] drm/msm/dsi_phy_7nm: convert from round_rate() to determine_rate() Dmitry Baryshkov
  • [PATCH v2 2/7] drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate() Brian Masney
  • Re: [PATCH v2 2/7] drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate() Dmitry Baryshkov
  • Re: [PATCH v2 2/7] drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate() Konrad Dybcio
  • [PATCH v2 6/7] drm/msm/hdmi_phy_8996: convert from round_rate() to determine_rate() Brian Masney
  • Re: [PATCH v2 6/7] drm/msm/hdmi_phy_8996: convert from round_rate() to determine_rate() Konrad Dybcio
  • Re: [PATCH v2 6/7] drm/msm/hdmi_phy_8996: convert from round_rate() to determine_rate() Dmitry Baryshkov
  • [PATCH v2 7/7] drm/msm/hdmi_phy_8998: convert from round_rate() to determine_rate() Brian Masney
  • Re: [PATCH v2 7/7] drm/msm/hdmi_phy_8998: convert from round_rate() to determine_rate() Konrad Dybcio
  • Re: [PATCH v2 7/7] drm/msm/hdmi_phy_8998: convert from round_rate() to determine_rate() Dmitry Baryshkov
  • Re: [PATCH v2 0/7] drm/msm/dsi/phy: convert from clk round_rate() to determine_rate() Konrad Dybcio
  • Re: [PATCH v2 0/7] drm/msm/dsi/phy: convert from clk round_rate() to determine_rate() Dmitry Baryshkov
• [PATCH v5 0/6] dt-bindings: msm/dp: Add support for 4 pixel streams Dmitry Baryshkov
  • [PATCH v5 5/6] dt-bindings: display/msm: add stream pixel clock bindings for MST Dmitry Baryshkov
  • [PATCH v5 3/6] dt-bindings: display/msm: dp-controller: add X1E80100 Dmitry Baryshkov
  • [PATCH v5 2/6] dt-bindings: display/msm: qcom,x1e80100-mdss: correct DP addresses Dmitry Baryshkov
  • [PATCH v5 6/6] arm64: dts: qcom: Add MST pixel streams for displayport Dmitry Baryshkov
  • [PATCH v5 1/6] dt-bindings: display/msm: dp-controller: allow eDP for SA8775P Dmitry Baryshkov
  • [PATCH v5 4/6] dt-bindings: display/msm: drop assigned-clock-parents for dp controller Dmitry Baryshkov
• [PATCH] dt-bindings: display/msm: qcom,mdp5: drop lut clock Dmitry Baryshkov
  • Re: [PATCH] dt-bindings: display/msm: qcom,mdp5: drop lut clock Konrad Dybcio
  • Re: [PATCH] dt-bindings: display/msm: qcom,mdp5: drop lut clock Dmitry Baryshkov
• [PATCH v4 0/6] dt-bindings: msm/dp: Add support for 4 pixel streams Dmitry Baryshkov
  • [PATCH v4 2/6] dt-bindings: display/msm: qcom,x1e80100-mdss: correct DP addresses Dmitry Baryshkov
  • [PATCH v4 4/6] dt-bindings: display/msm: drop assigned-clock-parents for dp controller Dmitry Baryshkov
  • [PATCH v4 6/6] arm64: dts: qcom: Add MST pixel streams for displayport Dmitry Baryshkov
  • [PATCH v4 5/6] dt-bindings: display/msm: add stream pixel clock bindings for MST Dmitry Baryshkov
  • [PATCH v4 3/6] dt-bindings: display/msm: dp-controller: add X1E80100 Dmitry Baryshkov
  • [PATCH v4 1/6] dt-bindings: display/msm: dp-controller: allow eDP for SA8775P Dmitry Baryshkov
• [PATCH v2 00/12] drm/msm/dp: Drop the HPD state machine Jessica Zhang
  • [PATCH v2 01/12] drm/msm/dp: fix HPD state status bit shift value Jessica Zhang
  • Re: [PATCH v2 01/12] drm/msm/dp: fix HPD state status bit shift value Dmitry Baryshkov
  • [PATCH v2 02/12] drm/msm/dp: Fix the ISR_* enum values Jessica Zhang
  • [PATCH v2 07/12] drm/msm/dp: Handle internal HPD IRQ in hpd_notify() Jessica Zhang
  • Re: [PATCH v2 07/12] drm/msm/dp: Handle internal HPD IRQ in hpd_notify() Dmitry Baryshkov
  • [PATCH v2 05/12] drm/msm/dp: Drop EV_USER_NOTIFICATION Jessica Zhang
  • Re: [PATCH v2 05/12] drm/msm/dp: Drop EV_USER_NOTIFICATION Dmitry Baryshkov
  • [PATCH v2 10/12] drm/msm/dp: Return early from atomic_enable() if cable is not connected Jessica Zhang
  • [PATCH v2 11/12] drm/msm/dp: drop the entire HPD state machine Jessica Zhang
  • Re: [PATCH v2 11/12] drm/msm/dp: drop the entire HPD state machine Dmitry Baryshkov
  • [PATCH v2 12/12] drm/msm/dp: Add sink_count and link_ready to debug logs Jessica Zhang
  • [PATCH v2 03/12] drm/msm/dp: Read DPCD and sink count in bridge detect() Jessica Zhang
  • Re: [PATCH v2 03/12] drm/msm/dp: Read DPCD and sink count in bridge detect() Dmitry Baryshkov
  • [PATCH v2 04/12] drm/msm/dp: Move link training to atomic_enable() Jessica Zhang
  • Re: [PATCH v2 04/12] drm/msm/dp: Move link training to atomic_enable() Dmitry Baryshkov
  • Re: [PATCH v2 04/12] drm/msm/dp: Move link training to atomic_enable() Jessica Zhang
  • Re: [PATCH v2 04/12] drm/msm/dp: Move link training to atomic_enable() Dmitry Baryshkov
  • [PATCH v2 08/12] drm/msm/dp: Drop event waitqueue Jessica Zhang
  • Re: [PATCH v2 08/12] drm/msm/dp: Drop event waitqueue Dmitry Baryshkov
  • [PATCH v2 06/12] drm/msm/dp: Use drm_bridge_hpd_notify() Jessica Zhang
  • Re: [PATCH v2 06/12] drm/msm/dp: Use drm_bridge_hpd_notify() Dmitry Baryshkov
  • [PATCH v2 09/12] drm/msm/dp: remove redundant checks related to ST_DISPLAY_OFF in plug handler Jessica Zhang
  • Re: [PATCH v2 09/12] drm/msm/dp: remove redundant checks related to ST_DISPLAY_OFF in plug handler Dmitry Baryshkov
• [bug report] drm/msm/adreno: Add support for ACD Dan Carpenter
  • Re: [bug report] drm/msm/adreno: Add support for ACD Akhil P Oommen
  • Re: [bug report] drm/msm/adreno: Add support for ACD Dan Carpenter
  • Re: [bug report] drm/msm/adreno: Add support for ACD Akhil P Oommen
  • Re: [bug report] drm/msm/adreno: Add support for ACD Dan Carpenter
  • Re: [bug report] drm/msm/adreno: Add support for ACD Rob Clark
• [PATCH v2] drm/msm: Fix objtool warning in submit_lock_objects() Sasha Levin
  • Re: [PATCH v2] drm/msm: Fix objtool warning in submit_lock_objects() Rob Clark
• [PATCH] drm/msm/dpu: avoid uninitialized variable use Arnd Bergmann
  • Re: [PATCH] drm/msm/dpu: avoid uninitialized variable use Dmitry Baryshkov
  • Re: [PATCH] drm/msm/dpu: avoid uninitialized variable use Nathan Chancellor
  • Re: [PATCH] drm/msm/dpu: avoid uninitialized variable use Dmitry Baryshkov
  • Re: [PATCH] drm/msm/dpu: avoid uninitialized variable use Nathan Chancellor
  • Re: [PATCH] drm/msm/dpu: avoid uninitialized variable use Arnd Bergmann
• [PATCH v6 0/6] Display enablement changes for Qualcomm QCS8300 platform Yongxing Mou
  • [PATCH v6 2/6] dt-bindings: display/msm: dp-controller: document QCS8300 compatible Yongxing Mou
  • Re: [PATCH v6 2/6] dt-bindings: display/msm: dp-controller: document QCS8300 compatible Dmitry Baryshkov
  • Re: [PATCH v6 2/6] dt-bindings: display/msm: dp-controller: document QCS8300 compatible Yongxing Mou
  • Re: [PATCH v6 2/6] dt-bindings: display/msm: dp-controller: document QCS8300 compatible Dmitry Baryshkov
  • Re: [PATCH v6 2/6] dt-bindings: display/msm: dp-controller: document QCS8300 compatible Yongxing Mou
  • [PATCH v6 3/6] dt-bindings: display/msm: Document MDSS on QCS8300 Yongxing Mou
  • [PATCH v6 1/6] dt-bindings: display/msm: Document the DPU for QCS8300 Yongxing Mou
  • [PATCH v6 4/6] drm/msm: mdss: Add QCS8300 support Yongxing Mou
  • Re: [PATCH v6 4/6] drm/msm: mdss: Add QCS8300 support Dmitry Baryshkov
  • Re: [PATCH v6 4/6] drm/msm: mdss: Add QCS8300 support Yongxing Mou
  • [PATCH v6 5/6] soc: qcom: ubwc: Add QCS8300 UBWC cfg Yongxing Mou
  • Re: [PATCH v6 5/6] soc: qcom: ubwc: Add QCS8300 UBWC cfg Dmitry Baryshkov
  • Re: [PATCH v6 5/6] soc: qcom: ubwc: Add QCS8300 UBWC cfg Bjorn Andersson
  • Re: [PATCH v6 5/6] soc: qcom: ubwc: Add QCS8300 UBWC cfg Konrad Dybcio
  • [PATCH v6 6/6] drm/msm/dp: Add DisplayPort controller for QCS8300 Yongxing Mou
  • Re: [PATCH v6 6/6] drm/msm/dp: Add DisplayPort controller for QCS8300 Dmitry Baryshkov
• [PATCH] drm/msm: Fix objtool warning in submit_lock_objects() Sasha Levin
  • Re: [PATCH] drm/msm: Fix objtool warning in submit_lock_objects() Rob Clark
  • Re: [PATCH] drm/msm: Fix objtool warning in submit_lock_objects() Sasha Levin
• [PATCH v2] drm/msm: Handle in-place remaps Rob Clark
  • Re: [PATCH v2] drm/msm: Handle in-place remaps Connor Abbott
• [PATCH] drm/msm: Fix a few comments Rob Clark
  • Re: [PATCH] drm/msm: Fix a few comments Dmitry Baryshkov
• [PATCH RESEND 0/2] drm/gpuvm+msm: Handle in-place remaps Rob Clark
  • [PATCH RESEND 2/2] drm/msm: Handle in-place remaps Rob Clark
  • [PATCH RESEND 1/2] drm/gpuvm: Send in-place re-maps to the driver as remap Rob Clark
  • Re: [PATCH RESEND 1/2] drm/gpuvm: Send in-place re-maps to the driver as remap Danilo Krummrich
  • Re: [PATCH RESEND 1/2] drm/gpuvm: Send in-place re-maps to the driver as remap Rob Clark
  • Re: [PATCH RESEND 1/2] drm/gpuvm: Send in-place re-maps to the driver as remap Danilo Krummrich
  • Re: [PATCH RESEND 1/2] drm/gpuvm: Send in-place re-maps to the driver as remap Rob Clark
• [PATCH RESEND 0/2] drm/bridge: lontium-lt9611uxc: switch to DRM_BRIDGE_OP_HDMI_AUDIO Dmitry Baryshkov
  • [PATCH RESEND 1/2] drm/bridge: add connector argument to .hpd_notify callback Dmitry Baryshkov
  • [PATCH RESEND 2/2] drm/bridge: lontium-lt9611uxc: switch to HDMI audio helpers Dmitry Baryshkov
• [bug report] drm/msm: Add VM_BIND ioctl Dan Carpenter
  • Re: [bug report] drm/msm: Add VM_BIND ioctl Rob Clark
  • Re: [bug report] drm/msm: Add VM_BIND ioctl Dan Carpenter
• [PATCH v3 0/7] drm/msm: Various snapshot fixes Rob Clark
  • [PATCH v3 1/7] drm/msm: Add missing "location"s to devcoredump Rob Clark
  • [PATCH v3 2/7] drm/msm: Fix section names and sizes Rob Clark
  • [PATCH v3 3/7] drm/msm: Fix order of selector programming in cluster snapshot Rob Clark
  • [PATCH v3 4/7] drm/msm: Constify snapshot tables Rob Clark
  • [PATCH v3 5/7] drm/msm: Fix a7xx debugbus read Rob Clark
  • [PATCH v3 7/7] drm/msm: Fix a7xx TPL1 cluster snapshot Rob Clark
  • [PATCH v3 6/7] drm/msm: Fix debugbus snapshot Rob Clark
• [PATCH v14 00/13] drm/msm/dpu: Support quad pipe with dual-interface Jun Nie
  • [PATCH v14 01/13] drm/msm: Do not validate SSPP when it is not ready Jun Nie
  • Re: [PATCH v14 01/13] drm/msm: Do not validate SSPP when it is not ready Dmitry Baryshkov
  • [PATCH v14 03/13] drm/msm/dpu: decide right side per last bit Jun Nie
  • [PATCH v14 04/13] drm/msm/dpu: fix mixer number counter on allocation Jun Nie
  • [PATCH v14 02/13] drm/msm/dpu: polish log for resource allocation Jun Nie
  • [PATCH v14 05/13] drm/msm/dpu: bind correct pingpong for quad pipe Jun Nie
  • [PATCH v14 06/13] drm/msm/dpu: Add pipe as trace argument Jun Nie
  • [PATCH v14 08/13] drm/msm/dpu: split PIPES_PER_STAGE definition per plane and mixer Jun Nie
  • [PATCH v14 07/13] drm/msm/dpu: handle pipes as array Jun Nie
  • [PATCH v14 09/13] drm/msm/dpu: Use dedicated WB number definition Jun Nie
  • [PATCH v14 10/13] drm/msm/dpu: blend pipes per mixer pairs config Jun Nie
  • [PATCH v14 11/13] drm/msm/dpu: support SSPP assignment for quad-pipe case Jun Nie
  • Re: [PATCH v14 11/13] drm/msm/dpu: support SSPP assignment for quad-pipe case Dmitry Baryshkov
  • [PATCH v14 12/13] drm/msm/dpu: support plane splitting in quad-pipe case Jun Nie
  • [PATCH v14 13/13] drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case Jun Nie

• Earlier messages