Innolux TV123WAM is a 12.3" eDP display panel with
2160x1440 resolution, which can be supported by simple
panel driver.
Changes in v1:
- Make use of simple panel driver instead of creating
a new driver for this panel (Sean Paul).
- Combine dt-binding and driver changes into one patch
as done by other existing panel support changes.
Changes in v2:
- Separate driver change from dt-binding documentation (Rob Herring).
- Add the properties from simple-panel binding that are applicable to
this panel (Rob Herring).
Signed-off-by: Sandeep Panda <spa...@codeaurora.org>
Reviewed-by: Rob Herring <r...@kernel.org>
---
.../bindings/display/panel/innolux,tv123wam.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
diff --git
a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
new file mode 100644
index 0000000..a9b3526
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
@@ -0,0 +1,20 @@
+Innolux TV123WAM 12.3 inch eDP 2K display panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "innolux,tv123wam"
+- power-supply: regulator to provide the supply voltage
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+ panel_edp: panel-edp {
+ compatible = "innolux,tv123wam";
+ enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
+ power-supply = <&pm8916_l2>;
+ backlight = <&backlight>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
