On 2018-12-03 06:47, Sean Paul wrote:
On Tue, Nov 27, 2018 at 02:28:30PM -0800, Jeykumar Sankaran wrote:
Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.

This change is based on the SDM845 Display port
driver changes[1].

changes in v2:
        - rebase on [2] (Sean Paul)
        - remove unwanted error checks and
          switch cases (Jordan Crouse)

[1] https://lwn.net/Articles/768265/
[2] https://lkml.org/lkml/2018/11/17/87

Signed-off-by: Jeykumar Sankaran <jsa...@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 47
+++++++++++++++++++++++++----
 2 files changed, 45 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index d3f4501..1f6b4b1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2015,7 +2015,7 @@ static int dpu_encoder_setup_display(struct
dpu_encoder_virt *dpu_enc,
 {
        int ret = 0;
        int i = 0;
-       enum dpu_intf_type intf_type;
+       enum dpu_intf_type intf_type = INTF_NONE;

dpu_intf_type seems unnecessary, you could just use the DRM_MODE_ENCODER_*
value
directly?

enum dpu_intf_type enumerates HW interface types the SOC has. Below switch
case maps the DRM_MODE_ENCODER_* to HW dpu_intf_type it should reserve.
Note that DRM_MODE_ENCODER_* and dpu_intf_type are not mapped 1-to-1.
e.g. DRM_MODE_ENCODER_TMDS can be mapped to HDMI or DisplayPort.

Thanks,
Jeykumar S.

        struct dpu_enc_phys_init_params phys_params;

        if (!dpu_enc || !dpu_kms) {
@@ -2038,9 +2038,9 @@ static int dpu_encoder_setup_display(struct
dpu_encoder_virt *dpu_enc,
        case DRM_MODE_ENCODER_DSI:
                intf_type = INTF_DSI;
                break;
-       default:
-               DPU_ERROR_ENC(dpu_enc, "unsupported display interface
type\n");
-               return -EINVAL;
+       case DRM_MODE_ENCODER_TMDS:
+               intf_type = INTF_DP;
+               break;
        }

        WARN_ON(disp_info->num_of_h_tiles < 1);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 985c855..7d931ae 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -473,6 +473,32 @@ static void _dpu_kms_initialize_dsi(struct
drm_device *dev,
        }
 }

+static void _dpu_kms_initialize_displayport(struct drm_device *dev,
+                                           struct msm_drm_private *priv,
+                                           struct dpu_kms *dpu_kms)
+{
+       struct drm_encoder *encoder = NULL;
+       int rc;
+
+       if (!priv->dp)
+               return;
+
+       encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
+       if (IS_ERR(encoder)) {
+               DPU_ERROR("encoder init failed for dsi display\n");
+               return;
+       }
+
+       rc = msm_dp_modeset_init(priv->dp, dev, encoder);
+       if (rc) {
+               DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
+               drm_encoder_cleanup(encoder);
+               return;
+       }
+
+       priv->encoders[priv->num_encoders++] = encoder;

No need to keep track of drm resources at the driver level, the core will
do
this for you. So can you please add a patch preceding this one to remove
the
priv->encoders/crtc/planes/connectors arrays?

+}
+
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
  *                           for underlying displays
@@ -487,6 +513,8 @@ static void _dpu_kms_setup_displays(struct
drm_device *dev,

Why are these functions voids? Seems like there are plenty of places for
them to
fail :)

Let's add a patch to the beginning of this series to properly handle
failures in
setup_displays and initialize_dsi

 {
        _dpu_kms_initialize_dsi(dev, priv, dpu_kms);

+       _dpu_kms_initialize_displayport(dev, priv, dpu_kms);
+
        /**
         * Extend this function to initialize other
         * types of displays
@@ -723,13 +751,20 @@ static void _dpu_kms_set_encoder_mode(struct
msm_kms *kms,
        info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
                        MSM_DISPLAY_CAP_VID_MODE;

-       /* TODO: No support for DSI swap */
-       for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
-               if (priv->dsi[i]) {
-                       info.h_tile_instance[info.num_of_h_tiles] = i;
-                       info.num_of_h_tiles++;
+       switch (info.intf_type) {
+       case DRM_MODE_ENCODER_DSI:
+               /* TODO: No support for DSI swap */
+               for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+                       if (priv->dsi[i]) {
+                               info.h_tile_instance[info.num_of_h_tiles]
= i;
+                               info.num_of_h_tiles++;
+                       }
                }
-       }
+               break;
+       case DRM_MODE_ENCODER_TMDS:
+               info.num_of_h_tiles = 1;
+               break;
+       };

        rc = dpu_encoder_setup(encoder->dev, encoder, &info);
        if (rc)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

--
Jeykumar S
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Reply via email to