On Tue, Dec 04, 2018 at 02:42:29PM -0800, Matthias Kaehlcke wrote:
> Get the ref clock of the PHY from the device tree instead of
> hardcoding its name and rate.
>
> Signed-off-by: Matthias Kaehlcke <m...@chromium.org>
> ---
> Changes in v4:
> - always use parent rate in dsi_pll_28nm_clk_set_rate() and
> dsi_pll_28nm_clk_recalc_rate()
> - pass name of VCO ref clock to pll_28nm_register() instead of
> storing it in a struct field
> - updated commit message
>
> Changes in v3:
> - use default name and rate if the ref clock is not specified
> in the DT
> - store vco_ref_clk_name instead of vco_ref_clk
> - dsi_pll_28nm_clk_set_rate: changed data type of ref_clk_rate to
> unsigned long
> - fixed check for EPROBE_DEFER
> - renamed VCO_REF_CLK_RATE to VCO_REF_CLK_DEFAULT_RATE
>
> Changes in v2:
> - patch added to the series
> ---
> drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 36 +++++++++++++++-------
> 1 file changed, 25 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
> b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
> index 26e3a01a99c2b..7777340b03e8d 100644
> --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
> +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
> @@ -40,7 +40,6 @@
>
> #define NUM_PROVIDED_CLKS 2
>
> -#define VCO_REF_CLK_RATE 19200000
> #define VCO_MIN_RATE 350000000
> #define VCO_MAX_RATE 750000000
>
> @@ -166,17 +165,17 @@ static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw,
> unsigned long rate,
> pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC1_CFG, 0x70);
> pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC2_CFG, 0x15);
>
> - rem = rate % VCO_REF_CLK_RATE;
> + rem = rate % parent_rate;
> if (rem) {
> refclk_cfg = DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR;
> frac_n_mode = 1;
> - div_fbx1000 = rate / (VCO_REF_CLK_RATE / 500);
> - gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 500);
> + div_fbx1000 = rate / (parent_rate / 500);
> + gen_vco_clk = div_fbx1000 * (parent_rate / 500);
> } else {
> refclk_cfg = 0x0;
> frac_n_mode = 0;
> - div_fbx1000 = rate / (VCO_REF_CLK_RATE / 1000);
> - gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 1000);
> + div_fbx1000 = rate / (parent_rate / 1000);
> + gen_vco_clk = div_fbx1000 * (parent_rate / 1000);
> }
>
> DBG("refclk_cfg = %d", refclk_cfg);
> @@ -265,7 +264,7 @@ static unsigned long dsi_pll_28nm_clk_recalc_rate(struct
> clk_hw *hw,
> void __iomem *base = pll_28nm->mmio;
> u32 sdm0, doubler, sdm_byp_div;
> u32 sdm_dc_off, sdm_freq_seed, sdm2, sdm3;
> - u32 ref_clk = VCO_REF_CLK_RATE;
> + u32 ref_clk = parent_rate;
> unsigned long vco_rate;
>
> VERB("parent_rate=%lu", parent_rate);
> @@ -273,7 +272,7 @@ static unsigned long dsi_pll_28nm_clk_recalc_rate(struct
> clk_hw *hw,
> /* Check to see if the ref clk doubler is enabled */
> doubler = pll_read(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG) &
> DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR;
> - ref_clk += (doubler * VCO_REF_CLK_RATE);
> + ref_clk += (doubler * ref_clk);
>
> /* see if it is integer mode or sdm mode */
> sdm0 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0);
> @@ -514,11 +513,12 @@ static void dsi_pll_28nm_destroy(struct msm_dsi_pll
> *pll)
> pll_28nm->clk_data.clk_num = 0;
> }
>
> -static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
> +static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm,
> + const char *ref_clk_name)
> {
> char clk_name[32], parent1[32], parent2[32], vco_name[32];
> struct clk_init_data vco_init = {
> - .parent_names = (const char *[]){ "xo" },
> + .parent_names = &ref_clk_name,
> .num_parents = 1,
> .name = vco_name,
> .flags = CLK_IGNORE_UNUSED,
> @@ -593,6 +593,8 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct
> platform_device *pdev,
> {
> struct dsi_pll_28nm *pll_28nm;
> struct msm_dsi_pll *pll;
> + struct clk *vco_ref_clk;
> + const char *vco_ref_clk_name;
> int ret;
>
> if (!pdev)
> @@ -605,6 +607,18 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct
> platform_device *pdev,
> pll_28nm->pdev = pdev;
> pll_28nm->id = id;
>
> + vco_ref_clk = devm_clk_get(&pdev->dev, "ref");
> + if (!IS_ERR(vco_ref_clk)) {
> + vco_ref_clk_name = __clk_get_name(vco_ref_clk);
> + } else {
> + ret = PTR_ERR(vco_ref_clk);
> + if (ret == -EPROBE_DEFER)
> + ERR_PTR(ret);
It looks like you are missing the return keyword here.
> +
> + dev_warn(&pdev->dev, "'ref' clock is not specified, using
> default name\n");
> + vco_ref_clk_name = "xo";
> + }
> +
> pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
> if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
> dev_err(&pdev->dev, "%s: failed to map pll base\n", __func__);
> @@ -637,7 +651,7 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct
> platform_device *pdev,
> return ERR_PTR(-EINVAL);
> }
>
> - ret = pll_28nm_register(pll_28nm);
> + ret = pll_28nm_register(pll_28nm, vco_ref_clk_name);
> if (ret) {
> dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
> return ERR_PTR(ret);
> --
> 2.20.0.rc1.387.gf8505762e3-goog
>
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
