Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function
dpu_encoder_phys_cmd_ctl_start_irq:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:136:31: warning: variable
cmd_enc set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function
dpu_encoder_phys_cmd_irq_control:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:328:31: warning: variable
cmd_enc set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function
dpu_encoder_phys_cmd_tearcheck_config:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:367:26: warning: variable
priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function
dpu_encoder_phys_cmd_wait_for_tx_complete:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:662:31: warning: variable
cmd_enc set but not used [-Wunused-but-set-variable]
They are not used since commit 25fdd5933e4c ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hul...@huawei.com>
Signed-off-by: zhengbin <zhengbi...@huawei.com>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 2923b63..6169c75 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -124,13 +124,11 @@ static void dpu_encoder_phys_cmd_pp_rd_ptr_irq(void *arg,
int irq_idx)
static void dpu_encoder_phys_cmd_ctl_start_irq(void *arg, int irq_idx)
{
struct dpu_encoder_phys *phys_enc = arg;
- struct dpu_encoder_phys_cmd *cmd_enc;
if (!phys_enc || !phys_enc->hw_ctl)
return;
DPU_ATRACE_BEGIN("ctl_start_irq");
- cmd_enc = to_dpu_encoder_phys_cmd(phys_enc);
atomic_add_unless(&phys_enc->pending_ctlstart_cnt, -1, 0);
@@ -316,13 +314,9 @@ static int dpu_encoder_phys_cmd_control_vblank_irq(
static void dpu_encoder_phys_cmd_irq_control(struct dpu_encoder_phys *phys_enc,
bool enable)
{
- struct dpu_encoder_phys_cmd *cmd_enc;
-
if (!phys_enc)
return;
- cmd_enc = to_dpu_encoder_phys_cmd(phys_enc);
-
trace_dpu_enc_phys_cmd_irq_ctrl(DRMID(phys_enc->parent),
phys_enc->hw_pp->idx - PINGPONG_0,
enable, atomic_read(&phys_enc->vblank_refcount));
@@ -355,7 +349,6 @@ static void dpu_encoder_phys_cmd_tearcheck_config(
struct drm_display_mode *mode;
bool tc_enable = true;
u32 vsync_hz;
- struct msm_drm_private *priv;
struct dpu_kms *dpu_kms;
if (!phys_enc || !phys_enc->hw_pp) {
@@ -377,7 +370,6 @@ static void dpu_encoder_phys_cmd_tearcheck_config(
DPU_ERROR("invalid device\n");
return;
}
- priv = dpu_kms->dev->dev_private;
/*
* TE default: dsi byte clock calculated base on 70 fps;
@@ -650,13 +642,10 @@ static int dpu_encoder_phys_cmd_wait_for_tx_complete(
struct dpu_encoder_phys *phys_enc)
{
int rc;
- struct dpu_encoder_phys_cmd *cmd_enc;
if (!phys_enc)
return -EINVAL;
- cmd_enc = to_dpu_encoder_phys_cmd(phys_enc);
-
rc = _dpu_encoder_phys_cmd_wait_for_idle(phys_enc);
if (rc) {
DRM_ERROR("failed wait_for_idle: id:%u ret:%d intf:%d\n",
--
2.7.4
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
