Some A3xx and all A4xx Adreno GPUs do not have GMEM inside the GPU core
and must use the On Chip MEMory (OCMEM) in order to be functional.
There's a separate interconnect path that needs to be setup to OCMEM.
Let's document this second interconnect path that's available. Since
there's now two available interconnects, let's add the
interconnect-names property.

Signed-off-by: Brian Masney <masn...@onstation.org>
---
 Documentation/devicetree/bindings/display/msm/gpu.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt 
b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 2b8fd26c43b0..3e6cd3f64a78 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -23,7 +23,10 @@ Required properties:
 - iommus: optional phandle to an adreno iommu instance
 - operating-points-v2: optional phandle to the OPP operating points
 - interconnects: optional phandle to an interconnect provider.  See
-  ../interconnect/interconnect.txt for details.
+  ../interconnect/interconnect.txt for details. Some A3xx and all A4xx 
platforms
+  will have two paths; all others will have one path.
+- interconnect-names: The names of the interconnect paths that correspond to 
the
+  interconnects property. Values must be gfx-mem and ocmem.
 - qcom,gmu: For GMU attached devices a phandle to the GMU device that will
   control the power for the GPU. Applicable targets:
     - qcom,adreno-630.2
@@ -76,6 +79,7 @@ Example a6xx (with GMU):
                operating-points-v2 = <&gpu_opp_table>;
 
                interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+               interconnect-names = "gfx-mem";
 
                qcom,gmu = <&gmu>;
 
-- 
2.21.0

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Reply via email to