Add voltage and pre emphesis swing tables so that voltage and pre emphsis swing level can be configured base on link rate.
Signed-off-by: Kuogee Hsieh <[email protected]> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 95 ++++++++++++++++++++++++++++++++----- 1 file changed, 82 insertions(+), 13 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 31036aa..52bab6e 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -1916,7 +1916,7 @@ static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11), QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4), QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a), - QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x22), QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20), }; @@ -3727,6 +3727,81 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy) return 0; } +/* + * 0x20 deducted from tables + * + * swing_value |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; + * pre_emphasis_value |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; +*/ +static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[4][4] = { + /* p0 p1 p2 p3 */ + { 0x00, 0x0c, 0x15, 0x1b }, /* s0 */ + { 0x02, 0x0e, 0x16, 0xff }, /* s1 */ + { 0x02, 0x11, 0xff, 0xff }, /* s2 */ + { 0x04, 0xff, 0xff, 0xff } /* s3 */ +}; + +static const u8 qmp_dp_v4_voltage_swing_hbr3_hbr2[4][4] = { + /* p0 p1 p2 p3 */ + { 0x02, 0x12, 0x16, 0x1a }, /* s0 */ + { 0x09, 0x19, 0x1f, 0xff }, /* s1 */ + { 0x10, 0x1f, 0xff, 0xff }, /* s2 */ + { 0x1f, 0xff, 0xff, 0xff } /* s3 */ +}; + +static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[4][4] = { + /* p0 p1 p2 p3 */ + { 0x00, 0x0e, 0x15, 0x1b }, /* s0 */ + { 0x00, 0x0e, 0x15, 0xff }, /* s1 */ + { 0x00, 0x0e, 0xff, 0xff }, /* s2 */ + { 0x04, 0xff, 0xff, 0xff } /* s3 */ +}; + +static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[4][4] = { + /* p0 p1 p2 p3 */ + { 0x08, 0x0f, 0x16, 0x1f }, /* s0 */ + { 0x11, 0x1e, 0x1f, 0xff }, /* s1 */ + { 0x16, 0x1f, 0xff, 0xff }, /* s2 */ + { 0x1f, 0xff, 0xff, 0xff } /* s3 */ +}; + +static int qcom_qmp_v4_phy_configure_dp_swing(struct qmp_phy *qphy, + unsigned int drv_lvl_reg, unsigned int emp_post_reg) +{ + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + unsigned int v_level = 0, p_level = 0; + u8 voltage_swing_cfg, pre_emphasis_cfg; + int i; + + for (i = 0; i < dp_opts->lanes; i++) { + v_level = max(v_level, dp_opts->voltage[i]); + p_level = max(p_level, dp_opts->pre[i]); + } + + + if (dp_opts->link_rate <= 2700) { + voltage_swing_cfg = qmp_dp_v4_voltage_swing_hbr_rbr[v_level][p_level]; + pre_emphasis_cfg = qmp_dp_v4_pre_emphasis_hbr_rbr[v_level][p_level]; + } else { + voltage_swing_cfg = qmp_dp_v4_voltage_swing_hbr3_hbr2[v_level][p_level]; + pre_emphasis_cfg = qmp_dp_v4_pre_emphasis_hbr3_hbr2[v_level][p_level]; + } + + /* TODO: Move check to config check */ + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) + return -EINVAL; + + /* Enable MUX to use Cursor values from these registers */ + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; + + writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg); + writel(pre_emphasis_cfg, qphy->tx + emp_post_reg); + writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg); + writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg); + + return 0; +} static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) { @@ -3757,14 +3832,7 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy) { - /* Program default values before writing proper values */ - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); - - writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); - writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); - - qcom_qmp_phy_configure_dp_swing(qphy, + qcom_qmp_v4_phy_configure_dp_swing(qphy, QSERDES_V4_TX_TX_DRV_LVL, QSERDES_V4_TX_TX_EMP_POST1_LVL); } @@ -3885,6 +3953,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN); writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG); udelay(2000); writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG); @@ -3896,11 +3967,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) 10000)) return -ETIMEDOUT; - writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); - writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x22, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x22, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
