It makes no sense to have the OPP table for the DSI controllers in the DSI1 PHY node. Move it to more logical dsi0 device node.
Signed-off-by: Dmitry Baryshkov <[email protected]> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++-------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index bc773e210023..5843e46a3164 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -3571,6 +3571,25 @@ dsi0_out: endpoint { }; }; }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; dsi0_phy: dsi-phy@ae94400 { @@ -3663,25 +3682,6 @@ dsi1_phy: dsi-phy@ae96400 { clock-names = "iface", "ref"; status = "disabled"; - - dsi_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-187500000 { - opp-hz = /bits/ 64 <187500000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; }; }; -- 2.35.1
