On 05/05/2023 23:40, Konrad Dybcio wrote:
> Document the SM6375 MDSS.
>
> Signed-off-by: Konrad Dybcio <konrad.dyb...@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm6375-mdss.yaml | 216
> +++++++++++++++++++++
> 1 file changed, 216 insertions(+)
>
Thank you for your patch. There is something to discuss/improve.
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,rpmcc.h>
> + #include <dt-bindings/clock/qcom,sm6375-gcc.h>
> + #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + display-subsystem@5e00000 {
> + compatible = "qcom,sm6375-mdss";
> + reg = <0x05e00000 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface", "ahb", "core";
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + iommus = <&apps_smmu 0x820 0x2>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + display-controller@5e01000 {
> + compatible = "qcom,sm6375-dpu";
> + reg = <0x05e01000 0x8e030>,
> + <0x05eb0000 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc DISP_CC_MDSS_ROT_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
> + <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
> + clock-names = "iface",
> + "bus",
> + "core",
> + "lut",
> + "rot",
> + "vsync",
> + "throttle";
Are you sure you have clocks in correct order? I see warnings...
Best regards,
Krzysztof
