This patch series adds support for the Visionox RM692E5 panel, which is used on the Nothing Phone (1) and then adds it to the DTS.
But before adding to DTS we need to allow all bpc values in DSC code, because Visionox RM692E5 has a bpc value of 10. Also we need to make sure that the DSC patch for 1.1.1 topology was applied. To: Neil Armstrong <[email protected]> To: Jessica Zhang <[email protected]> To: Maarten Lankhorst <[email protected]> To: Maxime Ripard <[email protected]> To: Thomas Zimmermann <[email protected]> To: David Airlie <[email protected]> To: Simona Vetter <[email protected]> To: Rob Herring <[email protected]> To: Krzysztof Kozlowski <[email protected]> To: Conor Dooley <[email protected]> To: Bjorn Andersson <[email protected]> To: Konrad Dybcio <[email protected]> To: Rob Clark <[email protected]> To: Abhinav Kumar <[email protected]> To: Dmitry Baryshkov <[email protected]> To: Sean Paul <[email protected]> To: Marijn Suijten <[email protected]> To: Jonathan Marek <[email protected]> To: Jun Nie <[email protected]> To: Eugene Lepshy <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: ~postmarketos/[email protected] Signed-off-by: Danila Tikhonov <[email protected]> Danila Tikhonov (1): dt-bindings: display: panel: Add Visionox RM692E5 Eugene Lepshy (3): drm/panel: Add Visionox RM692E5 panel driver drm/msm/dsi: Allow all bpc values arm64: dts: qcom: sm7325-nothing-spacewar: Enable panel and GPU .../display/panel/visionox,rm692e5.yaml | 77 ++++ .../boot/dts/qcom/sm7325-nothing-spacewar.dts | 53 ++- drivers/gpu/drm/msm/dsi/dsi_host.c | 7 +- drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-visionox-rm692e5.c | 433 ++++++++++++++++++ 6 files changed, 573 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,rm692e5.yaml create mode 100644 drivers/gpu/drm/panel/panel-visionox-rm692e5.c -- 2.48.1
