On Mon, Oct 19, 2026 at 10:44:41AM +0530, Vivek Kumar wrote:
> Some eDP sinks, especially fixed-format eDP-to-HDMI bridge chips with
> no downstream AUX-capable panel behind them, do not report a non-zero
> DP_SINK_COUNT even though they participate normally in DPCD capability
> exchange and link training.
> 
> Treating sink_count == 0 as a permanent disconnect is valid for external
> DisplayPort, but it breaks eDP probe/enable paths in
> msm_dp_display_prepare_link().
> 
> Use drm_dp_read_sink_count_cap() in msm_dp_link_parse_sink_status_field()
> and set link->sink_count to 1 when the capability is not available.
> 
> In dp_panel.c, msm_dp_panel_read_link_caps() still reads DP_SINK_COUNT
> for branch devices. That read is left unchanged here: the sink on the
> tested board reports DPCD 1.4 and does not advertise a downstream port,
> so that path is not taken.
> 
> Signed-off-by: Vivek Kumar <[email protected]>
> Assisted-by : LLM
> ---
>  drivers/gpu/drm/msm/dp/dp_display.c |  6 ++++--
>  drivers/gpu/drm/msm/dp/dp_link.c    | 30 +++++++++++++++++++++--------
>  drivers/gpu/drm/msm/dp/dp_link.h    |  5 ++++-
>  drivers/gpu/drm/msm/dp/dp_panel.c   |  5 +++++
>  drivers/gpu/drm/msm/dp/dp_panel.h   |  1 +
>  5 files changed, 36 insertions(+), 11 deletions(-)


Vivek please check the issues that Sashiko pointed out.
-- 
With best wishes
Dmitry

Reply via email to