Hi List I'm trying to configure a replica for a primary freeipa IdM server (both CentOS 7, AD trusts configured on primary), but "ipa-replica-install" fails with the following error: -- ipa-replica-install -d --setup-ca --setup-dns --no-forwarders /var/lib/ipa/replica-info-lolpr-idm-slve.idm.local.gpg . . Invalid IP Address 172.16.100.222 for lolpr-idm-slve.idm.local: cannot use IP network address . . --
For context, here is the full output from the replica-install command (I've attached the full debug output): --- [root@lolpr-idm-slve ipa]# ipa-replica-install --setup-ca --setup-dns --no-forwarders /var/lib/ipa/replica-info-lolpr-idm-slve.idm.local.gpg WARNING: conflicting time&date synchronization service 'chronyd' will be disabled in favor of ntpd Directory Manager (existing master) password: Run connection check to master Check connection from replica to remote master 'lolpr-idm-mstr.idm.local': Directory Service: Unsecure port (389): OK Directory Service: Secure port (636): OK Kerberos KDC: TCP (88): OK Kerberos Kpasswd: TCP (464): OK HTTP Server: Unsecure port (80): OK HTTP Server: Secure port (443): OK The following list of ports use UDP protocol and would need to be checked manually: Kerberos KDC: UDP (88): SKIPPED Kerberos Kpasswd: UDP (464): SKIPPED Connection from replica to master is OK. Start listening on required ports for remote master check Get credentials to log in to remote master admin@IDM.LOCAL password: Check SSH connection to remote master Execute check on remote master Check connection from master to remote replica 'lolpr-idm-slve.idm.local': Directory Service: Unsecure port (389): OK Directory Service: Secure port (636): OK Kerberos KDC: TCP (88): OK Kerberos KDC: UDP (88): OK Kerberos Kpasswd: TCP (464): OK Kerberos Kpasswd: UDP (464): OK HTTP Server: Unsecure port (80): OK HTTP Server: Secure port (443): OK Connection from master to replica is OK. Connection check OK Invalid IP Address 172.16.100.222 for lolpr-idm-slve.idm.local: cannot use IP network address [root@lolpr-idm-slve ipa]# --- Some things I've tested: 1. disable selinux (followed by reboot) - no change 2. disable IPv6 (followed by reboot) - no change DNS resolution and IP checks seem fine: --- [root@lolpr-idm-slve install]# hostname lolpr-idm-slve.idm.local [root@lolpr-idm-slve install]# ifconfig ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.100.222 netmask 255.255.255.255 broadcast 172.16.100.222 ether 00:50:56:9c:1e:60 txqueuelen 1000 (Ethernet) RX packets 17964 bytes 1705674 (1.6 MiB) RX errors 0 dropped 10 overruns 0 frame 0 TX packets 3772 bytes 595134 (581.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 -- /etc/hosts looks like this: -- 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 172.16.100.68 lolpr-idm-mstr.idm.local lolpr-idm-mstr 172.16.100.222 lolpr-idm-slve.idm.local lolpr-idm-slve 172.16.104.231 loltestdc001.loltestdc.com loltestdc001 -- Host naming, forward and reverse resolution seems fine: --- [root@lolpr-idm-slve install]# [root@lolpr-idm-slve install]# host `hostname` lolpr-idm-slve.idm.local has address 172.16.100.222 [root@lolpr-idm-slve install]# [root@lolpr-idm-slve install]# host `hostname`^C [root@lolpr-idm-slve install]# host `hostname`| cut -d " " -f 4| xargs -Iname host name 222.100.16.172.in-addr.arpa domain name pointer lolpr-idm-slve.idm.local. [root@lolpr-idm-slve install]# --- I'd be thankful if anyone could shed a light on why this error is happening and point me in the direction of a fix. Kind Regards, Traiano
ipa : DEBUG stdout=enabled ipa : DEBUG stderr= WARNING: conflicting time&date synchronization service 'chronyd' will be disabled in favor of ntpd Directory Manager (existing master) password: ipa : DEBUG Starting external process ipa : DEBUG args=/usr/bin/gpg-agent --batch --homedir /tmp/tmpIaHxbXipa/ipa-Ae8JB2/.gnupg --daemon /usr/bin/gpg --batch --homedir /tmp/tmpIaHxbXipa/ipa-Ae8JB2/.gnupg --passphrase-fd 0 --yes --no-tty -o /tmp/tmpIaHxbXipa/files.tar -d /var/lib/ipa/replica-info-lolpr-idm-slve.idm.local.gpg ipa : DEBUG Process finished, return code=0 ipa : DEBUG Starting external process ipa : DEBUG args=tar xf /tmp/tmpIaHxbXipa/files.tar -C /tmp/tmpIaHxbXipa ipa : DEBUG Process finished, return code=0 ipa : DEBUG stdout= ipa : DEBUG stderr= ipa : DEBUG Installing replica file with version 30303 (0 means no version in prepared file). ipa : DEBUG Check if lolpr-idm-slve.idm.local is a primary hostname for localhost ipa : DEBUG Primary hostname for localhost: lolpr-idm-slve.idm.local ipa : DEBUG Search DNS for lolpr-idm-slve.idm.local ipa : DEBUG Check if lolpr-idm-slve.idm.local is not a CNAME ipa : DEBUG Check reverse address of 172.16.100.222 ipa : DEBUG Found reverse name: lolpr-idm-slve.idm.local ipa : DEBUG Check if lolpr-idm-mstr.idm.local is a primary hostname for localhost ipa : DEBUG Primary hostname for localhost: lolpr-idm-mstr.idm.local ipa : DEBUG Search DNS for lolpr-idm-mstr.idm.local ipa : DEBUG Check if lolpr-idm-mstr.idm.local is not a CNAME ipa : DEBUG Check reverse address of 172.16.100.68 ipa : DEBUG Found reverse name: lolpr-idm-mstr.idm.local Run connection check to master ipa : DEBUG Starting external process ipa : DEBUG args=/usr/sbin/ipa-replica-conncheck --master lolpr-idm-mstr.idm.local --auto-master-check --realm IDM.LOCAL --principal admin --hostname lolpr-idm-slve.idm.local Check connection from replica to remote master 'lolpr-idm-mstr.idm.local': Directory Service: Unsecure port (389): OK Directory Service: Secure port (636): OK Kerberos KDC: TCP (88): OK Kerberos Kpasswd: TCP (464): OK HTTP Server: Unsecure port (80): OK HTTP Server: Secure port (443): OK The following list of ports use UDP protocol and would need to be checked manually: Kerberos KDC: UDP (88): SKIPPED Kerberos Kpasswd: UDP (464): SKIPPED Connection from replica to master is OK. Start listening on required ports for remote master check Get credentials to log in to remote master admin@IDM.LOCAL password: Check SSH connection to remote master Execute check on remote master Check connection from master to remote replica 'lolpr-idm-slve.idm.local': Directory Service: Unsecure port (389): OK Directory Service: Secure port (636): OK Kerberos KDC: TCP (88): OK Kerberos KDC: UDP (88): OK Kerberos Kpasswd: TCP (464): OK Kerberos Kpasswd: UDP (464): OK HTTP Server: Unsecure port (80): OK HTTP Server: Secure port (443): OK Connection from master to replica is OK. ipa : DEBUG Process finished, return code=0 Connection check OK ipa : DEBUG Starting external process ipa : DEBUG args=/sbin/ip -family inet -oneline address show ipa : DEBUG Process finished, return code=0 ipa : DEBUG stdout=1: lo inet 127.0.0.1/8 scope host lo\ valid_lft forever preferred_lft forever 2: ens192 inet 172.16.100.222/32 brd 172.16.100.222 scope global ens192\ valid_lft forever preferred_lft forever ipa : DEBUG stderr= ipa : DEBUG File "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", line 638, in run_script return_value = main_function() File "/sbin/ipa-replica-install", line 554, in main config.ip = installutils.get_server_ip_address(config.host_name, fstore, True, options) File "/usr/lib/python2.7/site-packages/ipaserver/install/installutils.py", line 459, in get_server_ip_address sys.exit("Invalid IP Address %s for %s: %s" % (hostaddr[0], host_name, unicode(e))) ipa : DEBUG The ipa-replica-install command failed, exception: SystemExit: Invalid IP Address 172.16.100.222 for lolpr-idm-slve.idm.local: cannot use IP network address Invalid IP Address 172.16.100.222 for lolpr-idm-slve.idm.local: cannot use IP network address ---
-- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go To http://freeipa.org for more info on the project