On 11.02.2016 11:05, Martin Basti wrote:
Hello,
comments inline.

On 11.02.2016 10:46, Quasar wrote:
Hi, I desperately need your help/advice with our ipa update process.
Briefly, we'd like to update our IPA 3.0 installation based on CentOS 6.7 to a newer version, and I read that the way of doing it is to create a new replica with a newer version of IPA server. Before writing this post, I browsed for similar issues (there are many of them with similar outcome) and tried to apply the suggested solutions but no luck. I also tried previous versions of Fedora (18 and 19) but again no luck.
It seems I'm stuck and I don't know how to proceed :(

Thank you in advance to anyhow who will take the time to read my message :) Let's start!

Right now we have a single running on Centos 6.7, and we are planning to create a replica with Fedora 20 which has IPA 3.3

Fedora 20 is end of life, why you use that old fedora?
Why not Centos7 or F23 ?

Upgrade path from CentOS to Fedora is supported or tested, there might be issues because versions of FreeIPA are different due backporting patches to CentOS
* is NOT supported

sorry

I suggest to use new FreeIPA 4.2 on centos 7.

Here are the details of the master (CentOS 6.7, hostname ipaserver)
[root@ipaserver ~]# uname -a
Linux ipaserver.it.fx.lan 2.6.32-279.el6.x86_64 #1 SMP Fri Jun 22 12:19:21 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

[root@ipaserver ~]# rpm -qa|grep -E 'freeipa-server|pki-ca'
ipa-pki-ca-theme-9.0.3-7.el6.noarch
pki-ca-9.0.3-43.el6.noarch

And here are the details of the replica (Fedoraa 20, hostname ipaserver-ha2)
[root@ipaserver-ha2 ~]# uname -a
Linux ipaserver-ha2.it.fx.lan 3.19.8-100.fc20.x86_64 #1 SMP Tue May 12 17:08:50 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

[root@ipaserver-ha2 ~]# rpm -qa|grep -E 'freeipa-server|pki-ca'
pki-ca-10.1.2-7.fc20.noarch
freeipa-server-3.3.5-1.fc20.x86_64

Here are the steps I made:
Before starting the replica I updated the schema of the master with the copy-schema-to-ca.py script I prepared the replica certificates on the server ("ipa-replica-prepare ipaserver-ha2.it.fx.lan --ip-address 10.0.0.10") and transferred to the replica server on the same folder
The I ran the replica install and here's the output:
[root@ipaserver-ha2 ~]# ipa-replica-install --setup-ca --setup-dns --no-forwarders --no-ntp /var/lib/ipa/replica-info-ipaserver-ha2.it.fx.lan.gpg
Directory Manager (existing master) password:

Run connection check to master
Check connection from replica to remote master 'ipaserver.it.fx.lan':
   Directory Service: Unsecure port (389): OK
   Directory Service: Secure port (636): OK
   Kerberos KDC: TCP (88): OK
   Kerberos Kpasswd: TCP (464): OK
   HTTP Server: Unsecure port (80): OK
   HTTP Server: Secure port (443): OK
   PKI-CA: Directory Service port (7389): OK

The following list of ports use UDP protocol and would need to be
checked manually:
   Kerberos KDC: UDP (88): SKIPPED
   Kerberos Kpasswd: UDP (464): SKIPPED

Connection from replica to master is OK.
Start listening on required ports for remote master check
Get credentials to log in to remote master
ad...@it.fx.lan password:

Check SSH connection to remote master
Execute check on remote master
Check connection from master to remote replica 'ipaserver-ha2.it.fx.lan':
   Directory Service: Unsecure port (389): OK
   Directory Service: Secure port (636): OK
   Kerberos KDC: TCP (88): OK
   Kerberos KDC: UDP (88): OK
   Kerberos Kpasswd: TCP (464): OK
   Kerberos Kpasswd: UDP (464): OK
   HTTP Server: Unsecure port (80): OK
   HTTP Server: Secure port (443): OK

Connection from master to replica is OK.

Connection check OK
Configuring directory server (dirsrv): Estimated time 1 minute
  [1/34]: creating directory server user
  [2/34]: creating directory server instance
  [3/34]: adding default schema
  [4/34]: enabling memberof plugin
  [5/34]: enabling winsync plugin
  [6/34]: configuring replication version plugin
  [7/34]: enabling IPA enrollment plugin
  [8/34]: enabling ldapi
  [9/34]: configuring uniqueness plugin
  [10/34]: configuring uuid plugin
  [11/34]: configuring modrdn plugin
  [12/34]: configuring DNS plugin
  [13/34]: enabling entryUSN plugin
  [14/34]: configuring lockout plugin
  [15/34]: creating indices
  [16/34]: enabling referential integrity plugin
  [17/34]: configuring ssl for ds instance
  [18/34]: configuring certmap.conf
  [19/34]: configure autobind for root
  [20/34]: configure new location for managed entries
  [21/34]: configure dirsrv ccache
  [22/34]: enable SASL mapping fallback
  [23/34]: restarting directory server
  [24/34]: setting up initial replication
Starting replication, please wait until this has completed.
Update in progress, 3 seconds elapsed
Update succeeded

  [25/34]: updating schema
  [26/34]: setting Auto Member configuration
  [27/34]: enabling S4U2Proxy delegation
  [28/34]: initializing group membership
  [29/34]: adding master entry
  [30/34]: configuring Posix uid/gid generation
  [31/34]: adding replication acis
  [32/34]: enabling compatibility plugin
  [33/34]: tuning directory server
  [34/34]: configuring directory to start on boot
Done configuring directory server (dirsrv).
Configuring certificate server (pki-tomcatd): Estimated time 3 minutes 30 seconds
  [1/19]: creating certificate server user
  [2/19]: configuring certificate server instance
ipa : CRITICAL failed to configure ca instance Command '/usr/sbin/pkispawn -s CA -f /tmp/tmpoqFGBW' returned non-zero exit status 1

Your system may be partly configured.
Run /usr/sbin/ipa-server-install --uninstall to clean up.

Configuration of CA failed


Log files on the replica server are attached.


On the master I extraced the access log of the http server:
10.0.0.10 - - [09/Feb/2016:15:30:23 +0100] "GET /ca/rest/securityDomain/domainInfo HTTP/1.1" 404 317 10.0.0.10 - - [09/Feb/2016:15:30:23 +0100] "GET /ca/admin/ca/getDomainXML HTTP/1.1" 200 1593 10.0.0.10 - - [09/Feb/2016:15:30:23 +0100] "GET /ca/rest/account/login HTTP/1.1" 404 305 10.0.0.10 - - [09/Feb/2016:15:30:45 +0100] "POST /ca/admin/ca/getCertChain HTTP/1.0" 200 1410 10.0.0.10 - - [09/Feb/2016:15:30:46 +0100] "GET /ca/rest/account/login HTTP/1.1" 404 305 10.0.0.10 - - [09/Feb/2016:15:30:46 +0100] "POST /ca/admin/ca/getCookie HTTP/1.1" 200 4092 10.0.0.10 - - [09/Feb/2016:15:30:47 +0100] "POST /ca/admin/ca/getDomainXML HTTP/1.0" 200 1593 10.0.0.10 - - [09/Feb/2016:15:30:47 +0100] "POST /ca/admin/ca/getCertChain HTTP/1.0" 200 1410 10.0.0.10 - - [09/Feb/2016:15:30:47 +0100] "POST /ca/admin/ca/updateNumberRange HTTP/1.0" 404 313 10.0.0.8 - - [09/Feb/2016:15:30:47 +0100] "POST /ca/ee/ca/tokenAuthenticate HTTP/1.0" 200 154 10.0.0.10 - - [09/Feb/2016:15:30:48 +0100] "POST /ca/admin/ca/updateNumberRange HTTP/1.0" 404 313 10.0.0.10 - - [09/Feb/2016:15:30:47 +0100] "POST /ca/ee/ca/updateNumberRange HTTP/1.0" 200 163 10.0.0.8 - - [09/Feb/2016:15:30:48 +0100] "POST /ca/ee/ca/tokenAuthenticate HTTP/1.0" 200 154 10.0.0.10 - - [09/Feb/2016:15:30:48 +0100] "POST /ca/ee/ca/updateNumberRange HTTP/1.0" 200 163 10.0.0.10 - - [09/Feb/2016:15:30:49 +0100] "POST /ca/admin/ca/updateNumberRange HTTP/1.0" 404 313 10.0.0.8 - - [09/Feb/2016:15:30:49 +0100] "POST /ca/ee/ca/tokenAuthenticate HTTP/1.0" 200 154 10.0.0.10 - - [09/Feb/2016:15:30:49 +0100] "POST /ca/ee/ca/updateNumberRange HTTP/1.0" 200 157 10.0.0.8 - - [09/Feb/2016:15:30:50 +0100] "POST /ca/ee/ca/tokenAuthenticate HTTP/1.0" 200 154 10.0.0.10 - - [09/Feb/2016:15:30:50 +0100] "POST /ca/admin/ca/getConfigEntries HTTP/1.0" 200 13746 10.0.0.8 - - [09/Feb/2016:15:31:41 +0100] "POST /ca/ee/ca/tokenAuthenticate HTTP/1.0" 200 154 10.0.0.10 - - [09/Feb/2016:15:31:41 +0100] "POST /ca/ee/ca/profileSubmit HTTP/1.0" 200 1459 10.0.0.10 - - [09/Feb/2016:15:31:42 +0100] "POST /ca/admin/ca/getDomainXML HTTP/1.0" 200 1593 10.0.0.10 - - [09/Feb/2016:15:31:42 +0100] "POST /ca/admin/ca/updateDomainXML HTTP/1.0" 404 311 10.0.0.10 - - [09/Feb/2016:15:31:42 +0100] "POST /ca/agent/ca/updateDomainXML HTTP/1.0" 200 115

Can you post debug log of CA?
/var/log/pki/pki-tomcat/ca/debug

It may contains more information

Martin

--
Giuseppe Calignano






-- 
Manage your subscription for the Freeipa-users mailing list:
https://www.redhat.com/mailman/listinfo/freeipa-users
Go to http://freeipa.org for more info on the project

Reply via email to