On 04/19/2017 12:31 PM, Martin Bašti wrote:
On 17.04.2017 19:42, David Goudet wrote:
Nobody has response about my questions?
The main question is: Is it possible to configure SSSD to update DNS
(option dyndns_update) with only IP address "primary" in ip addr list
or which is used to FreeIPA server communication (-IP1- used on TCP
Thank you for your help.
On 03/27/2017 09:40 PM, Jakub Hrozek wrote:
On Mon, Mar 27, 2017 at 06:34:24PM +0200, David Goudet wrote:
Thanks to dyndns_update=True parameter, SSSD service on client machine
updating host DNS entry in FreeIPA.
Everything is fine on machines which have only one IP adress on network
I have problem with machines which have more that one IP address on
network interface: if machine have two IP address, SSSD update host DNS entry
with these two IP address.
To reproduce the problem:
Host have -IP1- and i add -IP2-
ip addr add -IP2-/26 dev em1
ip addr list:
em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1496 qdisc mq state UP qlen
inet -IP1-/26 brd XXXX scope global em1
inet -IP2-/26 scope global secondary em1
valid_lft forever preferred_lft forever
DNS resolution (dig) before restarting sssd returns only -IP1-. After
restarting sssd returns -IP1- & -IP2-
In dyndns_update manpage, we have "The IP address of the IPA LDAP connection
is used for the updates", what does it means? Is it IP address of the DNS server
(used to update the DNS entry)? or is it IP address on client machine used during LDAP
TCP bind (-IP1- in my case)?
Optional. This option tells SSSD to automatically update
the DNS server built into FreeIPA v2 with the IP address of this client.
The update is secured using GSS-TSIG. The IP address of
the IPA LDAP connection is used for the updates, if it is not otherwise
specified by using the “dyndns_iface” option.
Is it normal behaviour that SSSD add in host DNS entry every IPs
enabled on client machine?
IIRC we added this to support multiple interfaces (user can choose
which one to use) and to update both IPv6 (AAAA) and IPv4 (A)
records. IPA/SSSD cannot reliably determine which IP address to use,
it is all or none from interface. With the previous behavior users
want to use different/more addresses than the one which has been
detected from LDAP connection and it was not possible previously.
Do you have set dyndns_iface in sssd.conf?
Looks like this was a deliberate change:
but to be honest, I forgot why exactly we did this. Martin, do you know?
Is it possible to configure SSSD to update DNS with only IP address
"primary" in ip addr list or which is used to FreeIPA server communication
(-IP1- used on TCP binding)?
Only if the IP addresses are of different families (v4/v6), then it's
possible to restrict one of the families.
I asked question here
Thank you for your response.
In sssd.conf parameter dyndns_iface is not defined, we are in case:
Default: Use the IP addresses of the interface which is used for IPA
This point (dyndns_iface) is ok, every IPs of this interface and only
this interface is updated on IPA host DNS entry.
I use only IPv4, so it is not possible to filter on only one IP
("primary") it is "none" or "all" on one interface.
In my case i see two solutions:
- Split IP "primary" on one interface (bond0 for exemple) and other
virtual IPs on one other interface (bond0.1 or bond1 for exemple)
- Disable dyndns_update functionality on this machine
You confirm, i have no other solutions?
Manage your subscription for the Freeipa-users mailing list:
Go to http://freeipa.org for more info on the project