Hey David, Are you using the newest FreeIPMI available? 0.6.5 from the FreeIPMI homepage? The debug dump data you've given me seems pretty out of date. I've changed the formatting + the amount of information that gets dumped.
================================================================ [ VALUE TAG NAME:LENGTH ] ================================================================ [ 2Dh] = cmd[ 8b] [ CBh] = comp_code[ 8b] ================================================================ (ipmi_monitoring_sensor_reading.c, _get_sensor_reading, 404): bad completion code: 0x51 ipmi_monitoring_sensor_readings_by_record_id: internal IPMI error Another user w/ a Dell machine hit sensors that returned 0xCB == "Requested Sensor, data, or record not present". This fix seems to be in the FreeIPMI 0.6.5 release. On another note, there are several sensors on your motherboard that ipmimonitoring currently does not interpret. I will add those into ipmimonitoring. Al On Tue, 2008-08-26 at 12:05 -0700, David Sparks wrote: > Al Chu wrote: > > Hey David, > > > > On another note. There are a lot of "Unknown" sensors listed below. > > Typically "Unknown" is shown b/c there are sensor reading errors on > the > > remote motherboard. But the below is just way too many to look > > reasonable. Could you also send the --debug output of ipmi-sensors > to > > me? > > Will do! Output is attached, I put stdout and stderr into separate > files > instead of interleaving the output. > > The server the commands are from is a Dell 1850. > > -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list Freeipmi-devel@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-devel