--- On Fri, 4/3/09, Al Chu <ch...@llnl.gov> wrote: > Hey Won, > > The reason for what you're seeing is described in the > ipmimonitoring > manpage. > > --- > Interpretation rules have not been written for all sensors > permutations > and types. Users may notice some sensors output in > ipmi-sensors(8) do > not output in ipmimonitoring. If sensor interpretation > rules are needed, > please contact the FreeIPMI maintainers. > --- > > Looking at your sensors output below, there are three OEM > sensors that I > can't interpret b/c I don't know the interpretation rules > for them. The > Power Unit Device Install and Fan transition > interpretations were > recently added in 0.7.3. So if you update to atleast > 0.7.3, those > readings should show up in ipmimonitoring. > > As for why Temperature Sensors aren't showing up, this > corner case for > HP machines also appears to have been fixed in 0.7..3.
Thank you for the tip. I installed the latest, 0.7.6, instead. hpdl380-fbsd71r# ipmi-sensors 1: UID Light (OEM Reserved): [OEM State = 0000h] 2: Int. Health LED (OEM Reserved): [OEM State = 0000h] 3: Ext. Health LED (OEM Reserved): [OEM State = 0000h] 4: Power Supply 1 (Power Supply): [Presence detected] 5: Power Supply 2 (Power Supply): [NA] 6: Power Supplies (Power Supply): [Non-redundant:Sufficient Resources from Redun dant] 8: VRM 1 (Power Unit): [Device Inserted/Device Present] 9: VRM 2 (Power Unit): [Device Inserted/Device Present] 10: Fan 1 (Fan): [transition to Running] 11: Fan 2 (Fan): [transition to Running] 12: Fan 3 (Fan): [transition to Running] 13: Fan 4 (Fan): [transition to Running] 14: Fan 5 (Fan): [transition to Running] 15: Fan 6 (Fan): [transition to Running] 16: Fans (Fan): [Fully Redundant] 18: Temp 1 (Temperature): 35.00 C (NA/70.00): [OK] 19: Temp 2 (Temperature): 17.00 C (NA/39.00): [OK] 20: Temp 3 (Temperature): 30.00 C (NA/127.00): [OK] 21: Temp 4 (Temperature): 30.00 C (NA/127.00): [OK] 22: Temp 5 (Temperature): 46.00 C (NA/77.00): [OK] 23: Temp 6 (Temperature): 30.00 C (NA/127.00): [OK] 24: Temp 7 (Temperature): 30.00 C (NA/127.00): [OK] 25: Power Meter (Current): [Device Enabled] hpdl380-fbsd71r# ipmimonitoring Record_ID | Sensor Name | Sensor Group | Monitoring Status| Sensor Units | Sensor Reading 4 | Power Supply 1 | Power Supply | Nominal | N/A | 'Presence detected' 6 | Power Supplies | Power Supply | Critical | N/A | 'Non-redundant:Sufficient Resources from Redu ndant' 8 | VRM 1 | Power Unit | Nominal | N/A | 'Device Inserted/Device Present' 9 | VRM 2 | Power Unit | Nominal | N/A | 'Device Inserted/Device Present' 10 | Fan 1 | Fan | Nominal | N/A | 'transition to Running' 11 | Fan 2 | Fan | Nominal | N/A | 'transition to Running' 12 | Fan 3 | Fan | Nominal | N/A | 'transition to Running' 13 | Fan 4 | Fan | Nominal | N/A | 'transition to Running' 14 | Fan 5 | Fan | Nominal | N/A | 'transition to Running' 15 | Fan 6 | Fan | Nominal | N/A | 'transition to Running' 16 | Fans | Fan | Nominal | N/A | 'Fully Redundant' 18 | Temp 1 | Temperature | Nominal | C | 35.000000 19 | Temp 2 | Temperature | Nominal | C | 17.000000 20 | Temp 3 | Temperature | Nominal | C | 30.000000 21 | Temp 4 | Temperature | Nominal | C | 30.000000 22 | Temp 5 | Temperature | Nominal | C | 46.000000 23 | Temp 6 | Temperature | Nominal | C | 30.000000 24 | Temp 7 | Temperature | Nominal | C | 30.000000 hpdl380-fbsd71r# One thing left is how i can into the SEL. I tried this with other tools. None of them gave an output. :( The box is IPMI v2.0-compliant. I can see a lot of logs using iLO. Thanks, Won _______________________________________________ Freeipmi-devel mailing list Freeipmi-devel@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-devel