Hey Andy, If I'm not mistaken, the in-band in ipmiutil is via "normal" Windows, not Cygwin?
Al On Thu, 2009-12-24 at 07:29 -0800, Andy Cress wrote: > There is a closed-source port of ipmitool from Sun that apparently has > some in-band Windows support with a special Sun driver, but the only > open-source IPMI support for Windows in-band is via ipmiutil > (http://*ipmiutil.sf.net), which supports both the Intel driver and > the Microsoft driver. > > > > Andy > > > > From:[email protected] > [mailto:[email protected]] > On Behalf Of sandeep patra > Sent: Wednesday, December 23, 2009 1:07 AM > To: [email protected] > Cc: [email protected] > Subject: Re: [Freeipmi-devel] make install issue in > freeipmi-0.8.2.beta3 > > > > > Hi Albert, > I have used the default --prefix option. (i.e. ./configure without any > --prefix option) > > I did modifications in two Makefiles to complete the "make install" > step > those file were > bmc-watchdog/Makefile > ipmi-pef-config/src/Makefile > > the changes that i did was (in the ipmi-pef-config/src/Makefile ) > previous: > $(install_sh) -d -m 755 $(DESTDIR)/$(sbindir) > cp -d ./pef-config $(DESTDIR)/$(sbindir) > > modified to: > $(install_sh) -d -m 755 $(DESTDIR)$(sbindir) > cp -d ./pef-config $(DESTDIR)$(sbindir) > > I did this steps manually [as these Makefiles were generated > automatically after ./configure]. > > After doing above two steps all the exe's were installed to the > location /usr/local/sbin/. > when i run commands likes ipmimonitoring or ipmi-sensors, it is giving > me error like "permission denied" > > Thanks and Regards, > Sandeep Kumar Patra > > > > On Tue, Dec 22, 2009 at 7:53 PM, Al Chu <[email protected]> wrote: > > Hi Sandeep, > > >From the README.build file > > ---- > By default files will typically be installed in /usr/local (binaries > in /usr/local/bin, libraries in /usr/local/lib, configuration files in > /usr/local/etc/, etc.). To install into the more common locations > such as /usr/bin, /usr/lib/, /etc, etc. the options passed into > `./configure' must be adjusted. > > The following set of options and settings are suitable for most Linux > systems. > > --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc > --localstatedir=/var --mandir=/usr/share/man > > Your mileage may vary depending on your system. > ---- > > Al > > > On Tue, 2009-12-22 at 12:31 +0530, sandeep patra wrote: > > Hi, > > I am trying to install freeipmi-0.8.2.beta3 on cygwin > (CYGWIN_NT-5.1), > > but failed to do so. > > "./configure " and "make" commands work fine > > but when i run "make install", it gives me following error > > > > > > make[3]: Nothing to be done for `install-exec-am'. > > /usr/bin/install -c -m 755 -d /usr/local/etc/init.d > > /usr/bin/install -c -m > > 755 ./bmc-watchdog.init /usr/local/etc/init.d/bmc-watchdo > > g > > /usr/bin/install -c -m 755 -d //usr/local/etc/sysconfig > > /usr/bin/install: cannot create directory `//usr': No such file or > > directory > > make[3]: *** [install-init-scripts] Error 1 > > make[3]: Leaving directory > > `/home/Administrator/freeipmi_issue/fresh_freeipmi/fr > > eeipmi-0.8.2.beta3/bmc-watchdog' > > make[2]: *** [install-am] Error 2 > > make[2]: Leaving directory > > `/home/Administrator/freeipmi_issue/fresh_freeipmi/fr > > eeipmi-0.8.2.beta3/bmc-watchdog' > > make[1]: *** [install-recursive] Error 1 > > make[1]: Leaving directory > > `/home/Administrator/freeipmi_issue/fresh_freeipmi/fr > > eeipmi-0.8.2.beta3/bmc-watchdog' > > make: *** [install-recursive] Error 1 > > > > > > No idea, why the path for sysconfig file > > is //usr/local/etc/sysconfig ???? > > > > > > > > > > Thanks and Regards, > > Sandeep Kumar Patra > > > > > > > > > > > > > > > > _______________________________________________ > > Freeipmi-devel mailing list > > [email protected] > > http://**lists.gnu.org/mailman/listinfo/freeipmi-devel > -- > Albert Chu > [email protected] > Computer Scientist > High Performance Systems Division > Lawrence Livermore National Laboratory > > > > > > The information contained in this document is CONFIDENTIAL and > property of Kontron. Any unauthorized review, use, disclosure or > distribution is prohibited without express written consent of Kontron. > If you are not the intended recipient, please contact the sender and > destroy all copies of the original message and enclosed attachments. -- Albert Chu [email protected] Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-devel
