> -----Original Message-----
> From: [email protected] [mailto:freeipmi-
> [email protected]] On Behalf Of Anand Babu
> Periasamy
> Sent: Tuesday, August 31, 2010 9:06 PM
> To: [email protected]
> Subject: Re: [Freeipmi-devel] Intel SR2500 ipmi-sensors
>
> On 08/31/2010 01:09 PM, Andy Cress wrote:
> > Somebody unplugged the NIC cable.
> >
> > Andy
> >
> > *From:* [email protected]
> > [mailto:[email protected]]
> > *On Behalf Of *Viet Le
> > *Sent:* Tuesday, August 31, 2010 3:41 PM
> > *To:* [email protected]
> > *Subject:* [Freeipmi-devel] Intel SR2500 ipmi-sensors
> >
> > Hello:
> >
> > The ipmi-sensors tool is giving me the following reading:
> >
> > "38: Physical Scrty (Platform Chassis Intrusion): [LAN Leash Lost
> > (system is unplugged from LAN)]"
> >
> > I am asked if as what does it mean and if there is a way to change it
> to OK.
> >
> > I would appreciate any helps.
>
> It cloud mean unplugged network cable or chassis intrusion switch on.
> There is a tiny
> switch that turns on if you open the chassis cover. It typically looks
> like a press-button
> type switch beneath the cover.
>
Hello All:
Tested with lab unit, and see the following:
1. Unplugged the LAN cable, get the following error:
Physical Scrty (Platform Chassis Intrusion): [LAN Leash Lost (system is
unplugged from LAN)]"
2. Open the chassis cover:
Physical Scrty (Platform Chassis Intrusion): [General Chassis Intrusion]
So the original messages asked was indicating that the LAN cable is unplugged.
The problem is: the LAN cable is indeed connected:
Network Interface Parameter Configuration(ifconfig -a)
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet6 fe80::215:17ff:fede:8910%em0 prefixlen 64 scopeid 0x1
inet x.x.x.x netmask 0xffffffc0 broadcast x.x.x.x
ether 00:15:17:de:89:10
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:15:17:de:89:11
media: Ethernet autoselect
status: no carrier
Are there any other cases that cause this issue ?
Thanks
Viet
_______________________________________________
Freeipmi-devel mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/freeipmi-devel
