Hi Al, On Die, 2011-01-25 at 09:00 +0100, Werner Fischer wrote: > Hi Al, > > > I got a beta release up with a new option to ipmi-sensors called > > --ignore-unrecognized-events. Appears to work for me in a test case, > > can you LMK if it works for you. > > http://download.gluster.com/pub/freeipmi/qa-release/freeipmi-1.0.2.beta0.tar.gz > Thanks! I'll be in the test lab again tomorrow, I will test it and let > you know. the option works like a charm ;-) - thank you very much! wfischer@werner-t410:~$ ipmi-sensors -h 10.1.102.201 -u monitoring -p relation -l user --interpret-oem-data --output-sensor-state --ignore-unrecognized-events ID | Name | Type | State | Reading | Units | Event 4 | FAN 1 | Fan | Nominal | 9216.00 | RPM | 'OK' [...] 1210 | VBAT | Voltage | Nominal | 3.05 | V | 'OK' 1277 | CPU1 Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0000h' 1344 | CPU2 Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0000h' 1411 | System Temp | Temperature | Nominal | 30.00 | C | 'OK' [...] 1880 | Chassis Intru | Physical Security | Nominal | N/A | N/A | 'OK' 1947 | PS Status | Power Supply | Nominal | N/A | N/A | 'Presence detected' wfischer@werner-t410:~$
> > > > when querying a Supermicro X8DTL-3F mainboard (Hardware Revision 2.01, > > > > IPMI Firmware Rev. 2.02) I have found two issues: > > > > 1. the 'CPU1 Temp' and 'CPU2 Temp' OEM sensors cannot currently be > > > > interpreted > > > I would bet these sensors are identical to other Supermicro boards I've > > > supported. What is the product id of your board? You can see it with > > > bmc-info. I can add it to the list and that should get the > > > interpretation working correctly [1] > I will send you the product id tomorrow from the lab. Here is the output of this system (X8DTL-3F) wfischer@werner-t410:~$ bmc-info -h 10.1.102.201 -u ADMIN -p **** -l admin Device ID : 32 Device Revision : 1 Device SDRs : unsupported Firmware Revision : 2.02 Device Available : yes (normal operation) IPMI Version : 2.0 Sensor Device : supported SDR Repository Device : supported SEL Device : supported FRU Inventory Device : supported IPMB Event Receiver : supported IPMB Event Generator : supported Bridge : unsupported Chassis Device : supported Manufacturer ID : Super Micro Computer Inc. (47488) Product ID : 6 GUID : 00000000-0000-0000-0000-000000000000 ipmi_cmd_get_system_info_parameters_system_firmware_version_first_set: privilege level insufficient wfischer@werner-t410:~$ Do you have an idea why there is this "privilege level insufficient" message although I use priviledge level admin? PS: I haven't used bmc-info so far. Seems also very interesting, so I tried it with two other systems: 1. Supermicro X8DT3-F - here I get more detailed information: wfischer@werner-t410:~$ bmc-info -h 10.1.102.10 -u ADMIN -p **** -l admin Device ID : 32 Device Revision : 1 Device SDRs : unsupported Firmware Revision : 1.32 Device Available : yes (normal operation) IPMI Version : 2.0 Sensor Device : supported SDR Repository Device : supported SEL Device : supported FRU Inventory Device : supported IPMB Event Receiver : supported IPMB Event Generator : supported Bridge : unsupported Chassis Device : supported Manufacturer ID : Super Micro Computer Inc. (47488) Product ID : 43707 Auxiliary Firmware Revision Information : 00000001h GUID : 00000000-0000-0000-0000-000000434D53 System Firmware Version : rsion1.0 System Name : tk-esx1 Primary Operating System Name : SE Server 1.0 Operating System Name : VMware ESXi 4.1.0 build-260247 Channel Information Channel Number : 0 Medium Type : IPMB (I2C) Protocol Type : IPMB-1.0 Active Session Count : 0 Session Support : session-less Vendor ID : Intelligent Platform Management Interface forum (7154) Channel Number : 1 Medium Type : 802.3 LAN Protocol Type : IPMB-1.0 Active Session Count : 1 Session Support : multi-session Vendor ID : Intelligent Platform Management Interface forum (7154) wfischer@werner-t410:~$ 2. Intel SR2500 - here I get an error at the end, too: wfischer@werner-t410:~$ bmc-info -h 192.168.1.211 -u admin -p **** -l admin Device ID : 32 Device Revision : 1 Device SDRs : unsupported Firmware Revision : 0.64 Device Available : yes (normal operation) IPMI Version : 2.0 Sensor Device : supported SDR Repository Device : supported SEL Device : supported FRU Inventory Device : supported IPMB Event Receiver : supported IPMB Event Generator : unsupported Bridge : unsupported Chassis Device : supported Manufacturer ID : Intel Corporation (343) Product ID : 40 Auxiliary Firmware Revision Information : 03004200h ipmi_cmd_get_device_guid: bad completion code wfischer@werner-t410:~$ Best regards, Werner -- : Werner Fischer : Technology Specialist : Thomas-Krenn.AG | The server-experts : http://www.thomas-krenn.com | http://www.thomas-krenn.com/wiki _______________________________________________ Freeipmi-devel mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-devel
